QUIKCELL SureShield Registration Card Instruction Manual
- June 5, 2024
- QUIKCELL
Table of Contents
SURESHIELD™
INSTALLATION INSTRUCTIONS
Pre-cleaning device screen
STEP 1: Thoroughly clean the entire glass surface with the cleaner supplied in the cleaner wipe. Remove all traces of adhesive residue from any previously applied screen protector.
STEP 2: Allow the device to fully dry.
STEP 3: Ensure you remove all traces of the cleaner by buffing the glass
thoroughly with the microfiber towel supplied.
Any adhesive residue or cleaner trace left on the glass surface will adversely
affect the ability of SureShield™ to bond to the glass.
Apply the nano-coating
For optimal results, apply SureShield™ to your mobile device the last thing at
night to allow maximum drying and bonding time.
STEP 1: In a circular motion, apply the SureShield™ nano-coating to all
glass surfaces using the coating wipe supplied in a nano-coating wipe. Make
sure the screen is completely coated including the edges.
STEP 2: Allow the glass surface to dry for at least 10 minutes. When dry, a residue will be visible on the glass.
STEP 3: Once fully dry, remove any excess residue with the microfiber towel supplied.
Post application
Following the application of nano-coating, you may notice that some minor scratching appears on your device. Please do not be concerned as this scratching is in a layer of excess liquid glass remaining on your screen after application. This scratching is easily buffed off using the microfiber towel supplied. Your device screen remains protected by the nano-coating cover case at all times.
PRODUCT WARNING:
Keep out of reach of children and sources of ignition. In case of contact with
the eyes, rinse immediately with clean water and seek medical advice.
REGISTRATION CARD
**Register your Device Reimbursement Guarantee
**
If your device screen is accidentally damaged with Quikcell SureShield on it,
your Device Reimbursement Guarantee may provide reimbursement of up to $200.
Full terms and conditions are available at:
quikcell.com/sureshieldguarantee
PLEASE NOTE: You must register your Device Reimbursement Guarantee within thirty (30) days of purchase. Failure to do so may void the Device Reimbursement guarantee. Your Device Reimbursement Guarantee remains effective for one (1) year beginning with the original purchase date.
Registration is easy
STEP 1:
Please visit https://asfalis.me/register
STEP 2:
Follow the instructions and enter this REGISTRATION PIN
XXXX XXXX XXXX XXXX
If you require any assistance with your Device For reimbursement Guarantee registration, please visit https://helpdesk.asfalis.com
How to make a claim
Please visit https://claims.asfalis.com to submit your claim.
FOR MORE INFORMATION
Device Reimbursement Guarantee terms and conditions available via
https://asfalis.me/register
US-AC200-01067 SN0000 0000