QUIKCELL PWERFLIP-BLK 2-in-1 Wireless Charging Pad User Guide
- October 30, 2023
- QUIKCELL
Table of Contents
POWER FLIP™
2-in-1 Wireless Charging Pad
QUICK START GUIDE
SPECIFICATIONS
Compatibility: 5W, 7.5W, 10W,15W Qi Capable Device
Wireless protocols: Most current Qi protocol (1.2.4) Qi-PPDE
Charge Distance: ≤5mm
Input Power: 12V/2A,9V/2A, or 5V/2A
Output Power: 15W Max
Fast Charge Adapter Standard: AFC/QC2.0 at 10W, PD/QC3.0 at 15W
Cable Type: USB-A to USB-C
Weight: 241g
Length/Width: 5.1 x 2.7 x 0.5in
Over Charge Protection: Will keep low current standby mode once device battery
reaches 100% capacity.
Certifications: FCC, Qi
WHAT’S INSIDE
- Wireless Charging Pad/Stand
- 3-foot USB to Type-C Charging Cable
CHARGING POSITIONS
- LED Light
- Type-C Charging Port
- Built-In Stand
STEP 1
PLUG IT IN
Using the included Type-C charging cable, plug the USB-C connector into your
Power Flip™ and connect the USB-A connector to a compatible port (such as a
wall charger, car charger, or computer).
Charger not included
STEP 2
START CHARGING
Place your wireless charging device on your Power Flip™ and look for the LED
light to indicate charging has started.
Note: When your device is removed, ensure the LED light turns off before
using the Power Flip™ for charging again.
Leave your device case on to charge! The Power Flip™ can wirelessly charge
through cases up to 3mm thickness.
Warning: Device cases that contain metal will prevent wireless charger from charging properly.
ONE YEAR LIMITED WARRANTY
© 2022 All rights reserved. Alphacomm and Quikcell are registered trademarks of Alpha Comm Enterprises, LLC. All other trademarks are the property of their respective owners. Designed by Alpha Comm Enterprises, LLC at 1500 Lakes Parkway, Lawrenceville, GA.30043.
Power Flip™
PWERFLIP-BLK
FCC ID: 2AQ93-WP07A01
Alpha Comm Enterprises Inc., LLC
1500 Lakes Parkway Lawrenceville GA 30043.
1-888-951-0909
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
