Doubleeagle Industry C52002 Desert Racer Building Block Instructions
- June 6, 2024
- Doubleeagle Industry
Table of Contents
INSTRUCTIONS
**JV8026 Remote Control (2.4GHz)
**
Install 2 pcs of 1.5V AAA nonrechargeable batteries in the correct polarity (remote control batteries are not included).
JV9032 Vehicle
Install 3 pcs of 1.5V AA non rechargeable batteries in the correct polarity (vehicle batteries are not included).
Battery Usage Notices
- Use 2 pcs of 1.5V AAA non-rechargeabie batteries for the remote controller.
- Use 3 pes of 1.5V AA non-rechargeable batteries for the toy.
- Insert/change batteries as per the correct polarity.
- Non-rechargeable batteries are not rechargeable.
- Do not mix old and new batteries, nor mix different types of batteries.
- Take out the exhausted batteries from the toy.
- The toy is not to be connected to more than recommended number of power supplies.
- The toy is not intended for children under 3 years old.
- Regularly check the wire, shell, and other components for any damage. Stop using when the damage is founded, the supply terminals are not to be short-circuited.
- Unscrew the battery cover with the screwdriver, and insert the battenes as per the correct polarity.
- Do not mix alkaline batteries, standard (carbon-zinc) or rechargeable batteries.
Frequency bands: 2426MHz to 2474 MHz
Maximum output power: 4.1dBm (for EU)
Manufacturer: Doubleeagle Industry (China) Limited.
Address: Xingda Industrial Park, Chenghai District, Shantou City,
Guangdong Province, China.
Importer Name: JAMARA e.K.
Address: Am Lauerbuehl 5 88317 Aichstetten
Germany
CHOKING HAZARD- small parts, not for children under 3 years. Specifications colors and contents may vary from illustrations.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.