Doubleeagle Industry C51009 RC Building Blocks User Manual

June 5, 2024
Doubleeagle Industry

Doubleeagle-Industry-C51009-RC-Building-Blocks-
logo

Doubleeagle Industry C51009 RC Building Blocks

Doubleeagle-
Industry-C51009-RC-Building-Blocks-productUSER MANUAL

Main Parameters
Product Name: R/C Building Blocks
Item No. : C51009W
Material: plastic and electronic components
Batteries: Car battery: 1 pc of 3.6 V AA rechargeable battery Remote controller battery: 2pcs of 1. SV AA batteries.

Doubleeagle-Industry-C51009-RC-Building-Blocks-fig1 Instruction of 2.4GHz Auto-matching

  1. 1. After installing the batteries into the r/ c car and remote controller, turn on the power of both, the indicator on the controller started flashing and the car is now in a state of matching. Matching is successful when the indicator stopped flashing and turned off
  2. One remote controller can only match and control one car. After thesuccess of matching, there is no interference between each car.
  3. if the remote controller does not receive any 2.4G signals from the car for one minute, it would automatically turn to a sleeping state (indicator turns off). To re-activate, please press any key on the controller.
  4. Turn off the power of both the controller and the car to cancel the matching between them so that the car/ controller can match with another controller/ car.

Basic Operation and Functions

  1. Forward/backward: To push the Left Trigger ahead/ back, the truck would go forward/backward; when forward, the lights on front and back would be lighted on; backward, the lights would be flashed(turn off when in a mute station)
  2. Turn Left/Right: To push the Left Trigger forward/backward, and Right Trigger turns left/right, the truck would turn left/right. The lights on left would be flashed when turn left, the same of right lights when turn right.

Recharging
Notice: Please tum the power switch to “OFF” position if the product will not be used for a long time Take the batteries out of the remote controller and the excavator if they are stored for a long time Charge the battery for about 4 to 5 hours, but it charges for 8 hours before initial use.

Notice

  1. Don’t play the toy on the road, select a safe place for operating to avoid danger.
  2. Plays the toy in water may cause short circuit damage. Please use a dry cloth to clean the car.
  3. If abnormal speed or reaction, it may be because of insufficient battery power, please charge the battery.
  4. The batteries should be charged under adult supervision. Please use the batteries recommended.
  5. Please install the battery in the correct polarity.
  6. Do not mix new and old batteries together, short-circuited.
  7. Please charge the battery before initial use.
  8. Don t break the remote control antenna to prevent injury.
  9. Please check the plug case and other units of charger regularly to make sure that it is not broken. Don’t use it again if you find an abnormality of the char ger.
  10. Please do not connect the product to different performance power.

changes or modifications note A”Pressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to a company with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmfol inte1ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to co1Tect the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit difl:erent from that to which the receiver is connected.
  • Consult the dealer or an eA”Perienced radio/TV technician for help.

Frequency bands: 2405MHz to 2475MHz
Maximum output power : -5.39c!Bm (for EU compliance)
Manufacturer: Doubleeagle Industry (China) Limited.
Address: Xingda Industria l Park, Chenghai District, Shantou City, Guangdong Province, China.
Importer : Toy Planet
Address: Parque Empresarial Tactica C/Velluters,37 46980 Paterna Spain
CHOKING HAZARD-small parts, not for children under 3 years.
Specifications colors and contents may vary from ill0ustrations.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Doubleeagle Industry User Manuals

Related Manuals