PROLED L515092G DMX PWM Dimmer 1-Channel 2G User Manual
- June 6, 2024
- PROLED
Table of Contents
DMX PWM DIMMER 1-KANAL 2G
L515092G
Users manual
Preface
Thank you for choosing PRO LED DMX PWM DIMMER 1-CHANNEL 2G. Before installation and use, we strongly recommend you to read this manual carefully. If the device has been damaged during transport, please report this to your supplier immediately. Please don’t take any action without contacting your supplier first
Limited Warranty
In case of quality problems we provide free repair or replacement within one year from the day of purchase, if this product has been used properly in accordance with the user’s manual, except in the following cases:
- Any defects caused by the wrong operation.
- Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection, and replacement of chips.
- Any damages due to transportation, vibration, etc. after purchase.
- Any damages caused by earthquake, fire, lightning, pollution, and abnormal voltage.
- Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
- The product has been updated
Safety Warnings
-
Please don’t install this dimmer during thunderstorms, intense magnetic or high-voltage electrical fields.
To reduce the risk of component damage and fire caused by a short circuit, make sure, that all connections are correct. -
Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
-
Check voltage and power requirements of the dimmer as well as the polarity of the power supply.
-
Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on.
-
Never attempt any repairs yourself; otherwise, the manufacturer’s warranty will be void.
-
For updated information please consult your supplier.
Product Description，
PRO LED DMX PWM DIMMER 1-CHANNEL 2G allows dimming of monochromatic LED- luminaires or Flex Strips. Setup or starting of Test-Programs can be done by using 3 buttons at the dimmer.
Technical data
| Modell | PROLED DMX PWM DIMMER 1-CHANNEL 2G |
|---|---|
| Input voltage | DC 12 – 24 V |
| Output voltage | DC 12 – 24 V |
| Output current | max. 1x 12 A |
| Output power | 144 W / 288 W (12 V / 24 V) |
| Ambiente temperature – | -10°C – 45°C |
| Dimensions | 175 mm × 44 mm x 30 mm (LxBxT) |
| Net-weight | 150 g |
Specifications
- OLED-Display
- 8 bit or 16 bit DMX 512-signal (8 bit = 4 DMX-channels, 16 bit = 8 DMX-channels)
- 3 Dimming curves (only at 8 bit)
- Test programs
Dimensions
Connections
Menu diagram
PRO LED DMX PWM DIMMER 1-CHANNEL 2G can start Self-Test-Scenes only when you
enter the menu „Self-Test“.
The screen saver will be activated around 2 minutes after the last command
input..
To load factory defaults press in the main menu (Figure 1) all 3 buttons
together. PAROLED DMX PWM DIMMER 1-CHANNEL 2G will load factory defaults and
the display will show „Device restore default“ for around 2 s.
After this, the system will return to the main menu (Figure 1).
Connection diagram
LED chose of voltage
Voltage output is always the same as voltage input.
If the luminaire needs 12 VDC, please choose a power supply with 12 VDC.
If the luminaire needs 24 VDC, please choose a power supply with 24 VDC.
LED chose of power
The output current can of the load has a range of 0 – 12 A.
At 12 VDC the power output can be between 0 – 144 W.
At 24 VDC the power output can be between 0 – 288 W.
The chosen power should be min. 20% above the connected load.
The more power you have, the better it works.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>