Baseus BS-W524 Wireless Charger User Manual
- June 6, 2024
- Baseus
Table of Contents
Wireless Charger
User
Manual
Please read this user manual carefully before use and keep its function to reference.
Instructions
Product Parameters
Name Wireless Charger
Model NO| BS-W524
Input| 5V-2A,9V-2A,12V=2A
Output| 15W(MAX)
Transmission| 115-205KHZ
Safety Instructions
- Please use a power adaptor that complies with local safety standards
- The operating temperature is from It to 35°C.
- When the device fails, do not disassemble and repair it by yourself.
- Keep away from fire when using the device
This equipment complies with the provisions of Directive 2112/19/EU. It is
strictly forbidden to dispose of this equipment with the ordinary trash; it
must be recycled. This symbol indicates that the product shall notbetreateal
as regular domestic trash, and must be delivered to a recycling center that is
capable of recycling electronic and electrical equipment.
This device complies with part 15 of the FCC Rules. operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limit
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy an., if not installed and used in Acco
reliance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. if this equipment does cause harmful
interference to radio or television reception, which can be determined by
bringing the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the Sea leror an experienced radio/1V technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for n
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device m must
be respected
After-sales service
- 12-months lirnites1 warranty
- Lifetime technical support
Q/SSCZ 121-2121
4011-712-711
www.baseus.com
Manufacturer: Shenzhen Times Innovation Technology Co., Lt.
Add 5th Floor, Quilling 6, 6aseus intelligence Park,
No2088, Xuegang Rd, Gangtou Community,
6a until n Street, Longgang District,
Shenzhen Executive Sion.
arsl: Q/SSCZ 021-2121
Hotline: +86-4110-712-711
Website:www.baseus.com
Designed by Baseus Made in China
PB3236Z- PIA0 