ACROMA 30803BGWT Dax 24-in 3-Light Satinbrass LED Modern-Contemporary Vanity Light Instruction Manual
- June 12, 2024
- ACROMA
Table of Contents
ACROMA 30803BGWT Dax 24-in 3-Light Satinbrass LED Modern-Contemporary
Vanity Light
Product Information
The product is a fixture that requires installation. It comes with a one-year warranty and certain safety precautions should be followed during installation. The package includes various hardware components for assembly. The fixture is designed to be hung from the ceiling.
| Product Name | Not specified |
|---|---|
| Manufacturer | Not specified |
| Warranty | One (1) year warranty |
Product Usage Instructions
Pre-Installation
- Read all instructions before installing the product.
- Place the product on a soft, non-abrasive surface, such as carpet or cardboard, to avoid damaging it.
Tools Required (Not Included)
The following tools are required for installation:
- Phillips Screwdriver
- Safety Goggles
- Wire Stripper
- Electrical Tape
- Pliers
Safety Information
- Before starting the installation or removal of the fixture, disconnect the power by turning off the circuit breaker, removing the fuse at the fuse box, or tripping the breaker that controls the circuit.
- Tape a sign to the panel warning others to leave the circuit alone while you work.
- If you have any electrical questions, consult a qualified electrician.
- For non-electrical questions, contact customer service via the distributor where you purchased the product from.
Assembly Guide
The following hardware components are included in the package:
- Mounting plate
- Support screw
- Outlet box screw (short) x 2 (long) x 2
- Green ground screw (on mounting plate)
- Wire connector x 3
- Finial x 2
- Hex nut x 2
- Glass x 3
- Socket Ring x 3
- Package 1
- Package 2
To assemble the fixture:
- Determine the length of stem or chain required.
- Attach the mounting plate to the junction box.
- Make all necessary electrical connections.
- Hang the fixture from the ceiling.
- Install the fixture.
Safety Warning
- Read wiring and grounding instructions, as well as any additional directions provided.
- Turn off the power supply during installation.
- If new wiring is required, consult a qualified electrician or local authorities for code requirements.
Installation Instructions
3 x Max 60 W Medium Base
Safety lnformation
READ AND SAVE THESE INSTRUCTIONS
-
For your protection and safety,carefully read and understand the information provided in this manual completely before attempting to assemble,install,or operate this product.Failure to do so could lead to electrical shock,fire,or other injuries that could be hazardous or even fatal.
-
Before touching any wire,use a voltage tester to make sure it not live.
-
When replacing fuses,turn off the main power firs.Make sure your hands and feet are dry,and place one hand behind your back to prevent electricity from making a complete circuit through your chest.
Touch the plug fuse only by its insulated rim.Remove cartridge fuses with a fuse puller. -
Use tools with insulated handles and ladders made of wood or fiberglass.
-
To protect children,place a safely cover over any unused outlets.
DANGER:Before staring installation of this fixture or removal of a previous fixture,disconnect the power by turning off the circuit breaker,removing the fuse at the fuse box,or tripping the breaker that controls that circuit.Tape a sign to the panel warning others to leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS. lf you have any non-electrical questions about this fixture please
contact our customer service via the distributor where you purchased this
product from.
We will be more than happy to assist.
Pre-lnstallation
PLANNING INSTALLATION
Read all instructions before installing.
To avoid damaging this product, place it on a soft, non-abrasive surface, such
as carpet or cardboard
TOOLS REQUIRED (NOT INCLUDED)
Warranty
ONE (1) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials
and workmanship for a period of one (1) year from date of purchase.
The warranty applies only to the original consumer purchaser and only to
products used in normal use and service.
If this product is found to be defective,the manufacturer’s only
obligation,and your exclusive remedy,is the repair or replacement of the
product at the manufacturer’s discretion,provided that the product has not
been damaged through misuse,abuse,accident,modifications,alteration,way not in
accordance with the instructions supplied with the product.This warranty shall
not apply to a failure of the product as a result of an
accident,misuse,abuse,negligence, alteration,faulty installation,or any other
failure not relating to faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product,such
as surface and/or weathering,as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty,
whether expressed or implied, of fitness for a particular purpose, other than
the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or
damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
ASSEMBLY GUIDE
Assembly lnstructions
Assembly of this fixture will be accomplished by first determining the length
of stem or chain required, attaching the mounting plate to the junction box,
making all necessary electrical connections, hanging the fixture from the
ceiling and then installing the fixture.
Safety Warning
Read wiring and grounding instruction and any additional directions. Turn
power supply off during installation. If new wiring is required, consult a
qualified electrician or local authorities for code requirements.
HARDWARE INCLUDED
Thank you for choosing ACROMA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>