2 Pack iPhone Earbuds [Apple MFi Certified] Wired in-Ear Stereo Noise Canceling headphones-Complete Features/Instruction Manual

2 Pack iPhone Earbuds [Apple MFi Certified] Wired in-Ear Stereo Noise

Canceling headphones

Specifications

• BRAND: SKYCABLE
• CONNECTIVITY TECHNOLOGY: Wired
• FORM FACTOR: In Ear
• PACKAGE DIMENSIONS: 5.39 x 3.07 x 0.67 inches
• ITEM WEIGHT: 0.634 ounces

Skycable earphones are basically designed to deliver the quality sound. These earphones are compatible with all devices which have lighting connectors. These earphones are compatible with iPhone 13/13 Pro/13 Pro Max/13 Mini/12 Mini/12 Pro Max/SE/11 Pro Max/11 Pro/XS Max/X/XR/8/8 Plus/7 Plus/7. These earphones are approved by MFi. C1 chips are used in these earphones to make the experience of listening better. These earphones offer the most realistic sound experience. It has 360 degrees stereo system which can deliver better music.  The earphones have a microphone and a volume controller. You can play/pause/stop, or change the track. You can even accept and reject calls with it. You can also use the voice assistant. Now there’s no need to take your phone out every time.

Two ways of connection

• After connecting in the headphones, a popup will display; to use, click “Connect with iCloud.”
• The audio must be switched from the speaker to “Beats” while making or receiving calls.
• The second time when you use these earphones, turn on Bluetooth and your earphones will be connected automatically.

How to increase volume

In order to increase the volume, follow the steps given below:

• When earphones are connected to the music. And you want to decrease the volume.
• Click the lower button to decrease the volume.
• Click the upper button to increase the volume.

How to use

By following the instructions below, you may connect your earphone to your phone.

• Connect the earphone jack to the phone’s headphone jack.
• Put on the headphones and listen to the music.
• You’ll begin to listen to the music.

Frequently Asked Questions

• What are earphones with a Lightning connector?
  Lightning headphones exist, and they allow you to connect a set of headphones right into the port on the bottom edge of your iPhone. They’re not something you’ll find in every store or from every manufacturer, but they do exist.

• What is the difference between EarPods with Lightning connector and EarPods without Lightning connector?
  The Lightning port has taken the place of the 3.5mm port. This is the most noticeable modification. The new EarPods will only operate with Lightning- enabled devices like iPhones, iPads, and iPod touches (but not iPod nano).

• What is the purpose of a Lightning connector?
  Lightning is a digital signal-carrying 8-pin connection. The Lightning connector, unlike the Apple 30 pin connector it replaces (and USB Type A or B connectors), may be inserted either face up or face down. Each pin on the connector’s reverse side is linked to its exact opposite twin on the other side.

• Is it possible to use Lightning headphones with an iPod touch? You’ll need an iPhone, iPad, or iPod touch with a Lightning connector and iOS 10 or later to use Apple EarPods with Lightning Connector. Apple EarPods with Lightning Connector are not compatible with the iPod nano or any iOS 9 or previous device.

• Are Lightning EarPods superior to 3.5 mm EarPods?
  The difference in the audio sample rate of their linked ports on the iPhone is another reason why Apple Lightning-compatible headphones offer higher audio quality than 3.5mm headphones. The iPhone’s 3.5mm headphone connector can only output 24-bit/48kHz music to headphones with a 3.5mm audio connection.

• What’s the difference between a USB and a Lightning connection?
  USB-C has a quicker charging rate and a greater power delivery rate than Lightning at the same voltage. Unlike Lightning, which has a maximum current of 2.4A, USB-C has a maximum current of 3A with compatibility for up to 5A.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>