EDIMAX EW-7611ULB V2 Wireless Adapter Installation Guide
- June 6, 2024
- EDIMAX
Table of Contents
EW-7611ULB V2
Quick Installation Guide
07-2021 / v1.0
Edimax Technology Co., Ltd. No. 278, Xinhu 1st Rd., Neihu Dist., Taipei
City, Taiwan Email: support@edimax.com.tw
Edimax Technology Europe B.V. Fijenhof 2, 5652 AE Eindhoven, The
Netherlands Email: support@edimax.nl
Edimax Computer Company 530 Technology Drive Suite 100, Irvine, CA 92618,
USA Email: support@edimax.us
I. Product Information & Safety Information
The EW-7611ULB V2 is a nano-sized 2-in-1 Wi-Fi USB Adapter with Bluetooth 4.2
that supports Wi-Fi up to 150Mbps and allows users to connect to Bluetooth
devices such as mobile phones, tablets, mice, keyboards, printers, and more.
When connected to an EW-7611ULB V2 network, you can experience secure web
surfing (WEP 64/128, WPA, WPA2, and IEEE 802.1x).
And with a tiny nano-size design you can easily plug it in without blocking
any surrounding USB ports, for both Wi-Fi and Bluetooth connectivity at the
same time.
You can find all supporting documents from the link below or via QR Code:
https://www.edimax.com/download
Once you’ve visited the Edimax official website, please enter the model no.
“EW-7611ULB V2” into the search box to search for your product.)
To select your product and find related download materials, enter the model
number into the search box on the right side or follow the simple steps below:
*Feel free to contact us anytime if you need help or if you can’t find your
product.
Package Contents
|
---|---
EW-7611ULB V2| Quick Installation Guide
I-2. System Requirement
Wi-Fi & Bluetooth Drivers:
- Windows 7/10 (Support Wi-Fi and Bluetooth drivers)
- Linux, kernel 2.6.24 ~ 5.8 (Support Wi-Fi and Bluetooth drivers)
- Additional version information will be announced on the EDIMAX website.
Hardware Interface
| No. | Description |
|---|---|
| 1 | USB 2.0 Type A |
| 2 | LED |
I-4. LED Status
LED Name Light Status Description Bluetooth OFF Power Off Blinking in Blue Bluetooth Transmitting data or management information Wi-Fi OFF Power Off Blinking in Yellow WLAN Transmitting data or management information
II. Hardware Installation
Please follow the steps below to install your Wi-Fi USB adapter,
1. Turn on your PC.
2. Insert the USB adapter into an available USB port of your computer.
Never use force to insert the USB adapter.
III. Driver Installation
Please follow the steps below to install the EW-7611ULB V2 Windows driver.
III-1. Windows
1. Go to the Edimax website (https://www.edimax.com/edimax/global/).
2. Enter model no. “EW-7611ULB V2” into the search box to search for your
product, and Go to Download, and download the driver.
To select your product and find related download materials, enter the model
number into the search box on the right side or follow the simple steps below:
*Feel free to contact us anytime if you need help or if you can’t find your
product.
3. Open the folder and double-click to install the driver.
4. Click “Next” to continue and follow the instructions on-screen until installation is complete.
5. Select restart your computer now or later and click “Finish”.
IV. Uninstall A Driver
Please follow the steps below to uninstall a driver for your USB adapter,
IV-1. Windows
1. Open Control Panel using the Start menu or Search function.
2. Select Uninstall a program under the Programs category.
3. Select Edimax EW-7611ULB V2 (or similar) and click Uninstall. 4. Click Yes to continue. 5. Click Finish to complete the uninstalling.
V. Connecting to Wi-Fi
Please follow the steps below to connect your Windows to Wi-Fi via
EW-7611ULB V2.
V-1. Windows
Below is an example of how to connect.
NOTE: The process may vary according to your Windows edition.
1. Click the network icon (examples below) in the system tray and select
“Connect to a network”.
2. Search for the SSID of your Wi-Fi network and then click “Connect”. If you set a password for your network, you will then be prompted to enter it. 3. After correctly entering your password, you will be successfully connected to your Wi-Fi network.
NOTE: To ensure that your USB wireless adapter can function correctly, it is
recommended that you disable any other existing wireless network adapters
installed on your computer.
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated
into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described
in this manual is sold or licensed as is. Should the programs prove defective
following their purchase, the buyer (and not this company, its distributor, or
its dealer) assumes the entire cost of all necessary servicing, repair, and
any incidental or consequential damages resulting from any defect in the
software. Edimax Technology Co., Ltd. reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. The software and specifications are
subject to change without notice. Please visit our website
www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of
their respective holders.
F ederal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter. This device complies with Part 15 of
the FCC Rules. operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate the equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 0.5 cm during normal operation.
RED Compliance Statement
Compliance with 2014/53/EU Radio Equipment Directive (RED) In accordance with
Article 10.8(a) and 10.8(b) of the RED, the following table provides
information on the frequency bands used and the maximum RF transmit power of
the product for sale in the EU:
| Frequency range (MHz) | Max. transmit power (dBm) |
|---|---|
| 2412-2472 | 18.34 dBm |
| 2402-2480 (BT) | 5.64 dBm |
| 2402-2480 (BLE) | 7.42 dBm |
A simplified DoC shall be provided as follows: Article 10(9)
Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type
N150 WiFi Bluetooth 4.0
USB Adapter is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the
following internet address: http://www.edimax.com/edimax/global/
Safety
This equipment is designed with the utmost care for the safety of those who
install and use it. However, special attention must be paid to the dangers of
electric shock and static electricity when working with electrical equipment.
All guidelines of this and of the computer manufacture must therefore be
allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in
Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Turkey, and United Kingdom. The ETSI version of this device is also
authorized for use in EFTA member states Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use None
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU, 2014/35/EU.
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as
household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment or
returned to the supplier for disposal.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that
the equipment described below complies with the requirements of the European
RadEquipment directives.
Equipment: 1T1R 11n Wireless LAN with Bluetooth USB Adapter Model No.: EW-
7611ULB V2
The following European standards for essential requirements have been
followed:
Directives 2014/53/EU
Spectrum : 300 328 V2.2.2 (2019-07)
EMC : 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EMF: 62311:2008
Safety (LVD) : IEC 62368-1:2014 (2 nd
Edition) and/or 62368-1:2014+A11:2017
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Printed Name: David Huang
Title: Director
Edimax Technology Europe B.V.
Accompany of: Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City, Taiwan
Date of Signature: July 2021
Signature:
Printed Name: Albert Chang
Title: Director
Edimax Technology Co., Ltd.
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that
the equipment described below complies with the requirements of the United
Kingdom Radio Equipment directives.
Equipment: 1T1R 11n Wireless LAN with Bluetooth USB Adapter Model No.: EW-
7611ULB V2
The following European standards for essential requirements have been
followed:
Directives 2014/53/EU
Spectrum : 300 328 V2.2.2 (2019-07)
EMC : 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EMF: 62311:2008
Safety (LVD) : IEC 62368-1:2014 (2 nd
Edition) and/or 62368-1:2014+A11:2017
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
Printed Name: David Huang
Title: Director
Edimax Technology Europe B.V.
Accompany of: Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd.,
Neihu Dist., Taipei City, Taiwan
Date of Signature: July 2021
Signature:
Printed Name: Albert Chang
Title: Director
Edimax Technology Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>