BASS JAXX EP-0650 Active Noise Cancelling Wireless Earbuds Instruction Manual

FRONT SIDE
ACTIVE NOISE
CANCE LL I NG-
WIRELESS E A R BUD S
BUILT-IN S.TV LI-ION BATTERY
INSTRUCTION MANUAL
Thank you for purchasing the Active Noise Cancelling
True Wireless Earbuds. This manual provides more information
about the wireless earbuds, please read the instructions before using.

Product Overview

Package Contents

Specifications

Driver Diameter 10 mm
impedance: 32 Ohms
Frequency Response: 20 Hz -20 KHz
Sensitivity. 100 8 +1-3 8
Power Supply
Li-ion Battery 3.7V 35 mAh (per Earbud)
Li-ion Battery 3.7V 300 mAh (Charging Case)
Play Time. Total 6 Hours (Earbuds playing time is 15Hours and the Charging Case can provide 3 times for the earbuds charging)
Charging Time: 2 Hours
Bluetooth Range: 32.8 Feet
Micro US8 cable included

Power On/Off

Power On
Touch and hold the Touch control area of earbuds for 3 seconds and the LED will flash
Power Off
Touch and hold the Touch control area of earbuds for 5 seconds and the LED will be off

Pair the wireless earbuds with your mobile device

1. Keep the distance between the earbuds and mobile device within 328 feet

2. Deactivate the Bluetooth function on your mobile device

3. Take both earbuds out from the Charging case and wait for 3 to 5 seconds for auto-pairing The earbuds have indicators blinking alternatively in Red and Blue One of the
   the earbud will be blinking in Blue slowly when auto-pairing is done successfully

4. Activate the Bluetooth function on your mobile device and select “ ANC TWS ” from the list shown

5. After pairing is successful, both earbuds will start blinking slowly in blue

Attention: If the auto-pairing is not successful, manual pairing between earbuds is essential by following the below procedures:

1. Make sure the earbuds are charged
2. Deactivate the Bluetooth function on your mobile device (if you had been paired the earbuds to some other mobile device(s) nearby, please be sure to de-activate those device(s) too)
3. power on both earbuds simultaneously by touch and hold the Touch control area for 3 seconds and wait for 3 to 5 seconds for auto-pairing (Keep the Bluetooth function off on your mobile device before this operation.)
4. Activate the Bluetooth function on your mobile device and select “ ANC TWS” from the list shown
5. After pairing successfully, both earbuds will start blinking slowly in blue

Reconnect the wireless earbuds to your mobile device

When powered on, the wireless earbuds will automatically connect with the last successfully paired device

Disconnect the wireless earbuds from your mobile device

Switch off the Bluetooth on your mobile phone or Leave the earbuds 60ft away from your mobile phone or further

BACKSIDE

Answer / Reject a call

When receiving a call, Click the touch control area once ( on either earbud) to accept the call, or answer the call normally via your mobile phone Click and hold the touch control area for 2 seconds to reject it

End a call

To end the call, just click the Touch control area once at any side of the earbud to end it

Functions

Pause /Play Music: Click the touch control area once
Double click the touch control area to turn ANC On or Off
Press and hold the touch control for 1 second at night earbud to skip next song, at left earbud to skip the previous song

Charging your Earbuds

1. Open the charging case cover
2. Insert the earbuds into the charging case.
3. The earbuds will start the charge automatically.
4. LED indicator light will be turned to Red when charging your earbuds
5. One fully charged, the LED will be off

Recharge Charging Case

For your safety, please always use the appropriate 5V input charger/Adapter to charge the product DO NOT USE Qui0k Charging US8 Adapter to charge the product, as it might damage the product

1. Use the Micro USB charging cable provided with the packaging
2. Connect the socket of the charging port on the charging case, then connect the USB plug to a US8 port on a computer or wall adapter to begin charging
3. The Red LED on the charging case will be flashing during the charge
4. Once fully charged, the Red LED will be on
5. The Blue LED will be on during Earbuds are charging and will be off once charging completed

NOTE:

• You must select a qualified charger from a regular manufacturer
• You must charge the charging case and earbuds if it has been not used for more than 12 months

FAQ

If the wireless earbuds cannot be paired with your device, please try the following:
Ensure that your earbuds are in paining mode or reconnection mode
Ensure that Bluetooth search function of your mobile device is activated
If the wireless earbuds will not turn on
Make sure the earbuds are fully charged
Can I change the battery for the charging case and earbuds?
The charging case and earbuds use a built-in non-detachable battery which cannot be removed
If the charging case cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered

Safety instructions for the lithium battery and charging the product

• The input voltage to the product is 5V 1A

• In order to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.

• Only charge the product at ambient temperatures between 10 deg C/50 deg F and 40 deg C/104 deg F.

• Do not heat above 70 deg C/158 deg F, eg. Do not expose to sunlight or throw into fire.

• Switch off the product after use.

• Please notes that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and product.
  we cannot control the operating process during the time the user using this

• In extreme cases, abuse or misuse of the Lithium battery packs can lead to an explosion, heat generation, fire development, or smoke development.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference.
   (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
  WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

FCCID:
FCC ID 2ADM5-EP.0650-R (Rght ear)
FCC ID 2ADM5-EP.0650-L (Lett ear)
Keep all relevant information for future reference

Item# EP-0650
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>