ESORUN Mini Wireless Charger with Magnet User Manual
- June 6, 2024
- ESORUN
Table of Contents
ESORUN Mini Wireless Charger with Magnet
Note: For best performance and safety, please read this manual carefully before using the product.
Product Diagram
Note:
Standby Mode: Light is red
Charging Mode : Light is blue
FOD Mode: Red and blue lights blink alternately
User Instruction:
-
Connect with wall charger
When using this product, please plug the type-C connector into the charger so as to ensure it is in standby mode.
Note: In order to get the best charging effect, please use the adapter that meets the QC2.0, QC3.0 or QC4.0 standard. In order to save energy and extend the product life, please cut off the power when your phone fully charged to avoid wasting energy.
Attention: For safety reasons, please do not use any adaptor which 1s under 5V/1A. -
Charging your iPhone Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be 15W.
NOTE
- Under normal charging cond1t1ons, the charger and mobile phone could be slightly hot, the temperature may rise 1f the mobile phone is working while charging (such as playmgv1deo)
- Please stop charging your phone when the charger 1s over-heating Our product will automatically stop charging when over-heating Please try 1t again when 1t’ s cooling down.
Remark:
• When the surface gets dirty, please wipe it with a damp cloth and dry it
before using.
• Please remove foreign objects on the surface before using, such as coins,
pins, keys, and other metal objects.
Specifications:
Input 5V/2A, 9V/1.34A, 9V/2A,12V/2A
Wireless Output| 5 V/ 1 A, (5 W) 9V/0 .83 A, (7.5 W)
9 V/ 1.1 2A,( 1 0W) 9V/ l. 6 7 A( l S W)
---|---
Charging Efficiency Cable Length| 1 Meter