NOMAD NM01983385 Base Station Stand Global V2 User Manual
- June 6, 2024
- NOMAD
Table of Contents
NOMAD NM01983385 Base Station Stand Global V2 User Manual
Base Station Stand Global V2
User Manual
1) Product name ：Base Station Stand Global V2
2) Model ：NM01983385
3) Including ：AC ADAPTOR QC18W (12V / 1.5A), Cable 2M , changeable UK,EU plug 1PC，base station 1PC；
4) Appearance and spec ：
4.1 Product photo ( Iphone is not included)：
4.2 Sepc.：
4.2.1 Size：72113.574.5mm
4.2.2 Input plug：TYPE C
4.2.3 Input：QC12V 1.5A/ PD9V 2A
4.2.4 Coil ：A13 *3，
4.2.5 Output ：BPP 5W / APPLE 7.5W / SAMSUMG 10W/ GOOGLE 10W/ OTHER EPP10W
4.2.6 LED indicator: 1 LED, Charging: Solid White,no Charge: off
4.2.7 Light Sensor: two type, bright and dark
4.2.8 Working frequency: 127.6kHz：
4.2.9 Max working temperature：30℃
4.3 Function：
4.3.1 Charging phone by horizontal and vertical
4.3.2 Support AIRPOD2，AIRPOD RPO,GOOGLE PIXEL BUDS
4.3.3 Support PD9V PD12V
4.3.4 Support QC9V QC12V
4.3.5 Have temperature protection function
6) Operation ：
6.1 Connect type C with AC adapter and base station, connect the AC adapter
with AC plug.
6.2 Place phone on the base station in horizontal or vertical, and make sure
phone is in the center of the station. Led light on when phone is in charging
.
7) Attention :
4.4 Place in dry environment, keep away from fire and impact.
4.5 Do not disassemble the product without the help of professional personnel.
4.6 Do not use an unmatched switching power supply for charging.
FCC WARING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation expo-sure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. When using the product, keep a distance of at least 15cm from the
product.