NOMAD Apple Watch Edition Global Base Station User Manual
- June 10, 2024
- NOMAD
Table of Contents
NOMAD Apple Watch Edition Global Base Station
Product Information
The Base Station – Apple Watch Edition is a wireless charging device that can charge multiple devices simultaneously. It has three charging positions for phones and one charging position for AirPods. It also features a magnetic suction module for charging Apple Watch 1-7 generation watches. The device has the following specifications:
- Size: 16510746mm (charging stand)
- Weight: g (including replaceable bull)
- Input Plug: DC 3.5mm
- Input Voltage: DC 12V 3.33A
- Coil Output: Three coils, only one or two mobile phone charging at the same time
- Charging MODE1 BPP phone: 5W
- Charging MODE2 BPP phone: 5W + 5W
- Charging MODE3 BPP phone + iPhone: 5W + 7.5W
- Charging MODE4 iPhone: 7.5W
- Charging MODE5 iPhone: 7.5W + 7.5W
- Charging MODE6 any phone + any phone: 5W MAX + 5W MAX (When the USBA and USB C ports are loaded, the wireless charge limits thepower output)
- APPLE SWITCH Charging module: Support APPLE SWITCH 1-7 generation watch charging
- USB A Output: 5W 5V/1A
- USB C Output: PD18W (5V/3A,9V/2A)
- LED Indicator: 3 LEDs, Charging OR Charged: Solid White
- Light Sensor: Yes Two gears, according to the environmental brightness dimming LED light
Product Usage Instructions
- Connect the DC plug of the AC ADAPTOR to the charging dock.
- Put the coil position of the mobile phone in alignment with the coil corresponding to the charging board. The mobile phone will enter the corresponding charging indicator state, indicating that the charging work is in progress.
- The coil on the far left is reserved for charging AirPods, so it’s not designed to charge a phone.
- The right coil and middle coil are for charging with Mobile phone.
- The watch charging magnetic suction module can only charge the watch.
Matters needing attention
- Please do not put the product in a humid environment, avoid near the fire source and impact.
- Do not disassemble the product without professional help.
- Do not use a non-compatible switching power supply to charge.
Manufacturer: Nomad Goods, Inc. 1187 Coast Village Rd. #638 Suite 1 Santa Barbara, CA 93108, United States
FCC Radiation Exposure Statement
This equipment complies with FCC radiation expo-sure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. When using the product, keep a distance of at least 20cm from the product.
RSS Statement (Canada): This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation
Components
AC ADAPTOR 40W (12V / 3.3A, Cable 1.5M/DC 3.5mm) convertible head 1PC, charging base 1PC
Appearance and Specifications
Product body picture：
Specification
Size : 16510746mm(charging stand)
- Weight: g(including replaceable bull)
- Input Plug ：DC 3.5mm
- Input Voltage ：DC 12V 3.33A
- Coil Output ：Three coils, only one or two mobile phone charging at the same time
- Charging MODE1 BPP phone: 5W
- Charging MODE2 BPP phone:5W + 5W
- Charging MODE3 BPP phone + iPhone: 5W + 7.5W
- Charging MODE4 iPhone : 7.5W
- Charging MODE5 iPhone: 7.5W + 7.5W
- Charging MODE6 any phone + any phone:5W MAX + 5W MAX(When the USBA and USB C ports are loaded, the wireless charge limits the power output)
- APPLE SWITCH Charging module: Support APPLE SWITCH 1-7 generation watch charging
- USB A Output ：5W（5V/1A)
- USB C Output ：PD18W(5V/3A,9V/2A）
- LED indicator: 3 LEDs, Charging OR Charged: Solid White)
- Light Sensor: Yes Two gears, according to the environmental brightness dimming LED light
Operating instruction
- Connect the DC plug of the AC ADAPTOR to the charging dock；
- Put the coil position of the mobile phone in alignment with the coil corresponding to the charging board, and the mobile phone will enter the corresponding charging indicator state, indicating that the charging work is in progress.
- The coil on the far left is reserved for charging AirPods, so it’s not designed to charge a phone.
- The right coil and middle coil is for charging with a Mobile phone
- The watch charging magnetic suction module can only charge the watch
Matters needing attention
- Please do not put the product in a humid environment, avoid near the fire source and impact；
- Do not disassemble the product without professional help；
- Do not use a non-compatible switching power supply to charge。
Manufacturer
Nomad Goods, Inc. 1187 Coast Village Rd. #638 Suite 1 Santa Barbara, CA 93108,
United State
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. When using the product, keep a distance of at least 20cm from the product.
RSS Statement (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation
Science and Economic Development Cana:la·s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference. including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. IC: 27646-NM01215585