Nomad Goods NM01172185 Base One Max Charger with MagSafe User Manual
- June 4, 2024
- Nomad Goods
Table of Contents
Goods NM01172185 Base One Max Charger with MagSafe
**User Manual
**
NM01172185 Base One Max Charger with MagSafe
Base One Max with MagSafe
- Name : Base One Max| with MagSafe | Carbide SKU: NM01172185 UPC: 856500011516 Base One Max | with MagSafe | White SKU: NM01173885 UPC: 856500011745 Base One Max | with MagSafe | Gold SKU: NNM00499685 UPC: 856500011752
- include dock X 1, Cable X 1
- Appearance and specifications
3.1 Product appearance picture
3.2 Specifications
3.2.1 Size1899047mm (Dock)
3.2.2 Weight950g (Cable not included)
3.2.3 Input receptor USB C
3.2.4 Input requirement: PD 30W (12V/2.5A,15V/2A OR 20V 1.5A) or above.
3.2.5 Output1: 15W(Max with iPhone12/iPhone13).
3.2.6 Output25W(Max with watch series)
Operation instructions
4.1.1 Insert one USB-C plug of the USB C To C Cable into the USB-C receptacle
of the charger.
4.1.2 Insert the other USB-C plug of the USB C To C Cable into the PD 30W+
adapter
4.1.3 Plug the PD ADAPTOR into an AC socket
4.1.4 Place a Phone with the MagSafe wireless charging feature on the wireless
charger and align the phone center with the MagSafe module center of the
charger. The phone will be sucked in by the MagSafe module of the charger and
then charged.
4.1.5 Place a watch with Watch Charge Moudul center of the charge. The watch
will be sucked in by the module of the charger and then charged.
Environment Requirements
a. Operation temperature and relative Humidity:-5 to +25;10%RH to 85%RH
b. Storage temperature and relative Humidity-20 to +40;5%RH to 95%RH
Notice:
6.1 A PD adapter of no less than 30W is required for charging, otherwise, the
charger will not work properly. 6.2 For indoor and dry conditions use only,
away from damp or damp locations.
6.2 Away from any liquid or damp environment.
6.3 Avoid any fire and shocks.
6.4 Unplug the USB-C cable if you don’t use for a long time.
6.3 Please do not disassemble this product without professional help.
Manufacturer.
Nomad Goods, Inc.
1187 Coast Village Rd. #638 Suite 1 Santa Barbara, CA 93108, United State
FCC WARING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. When using the product, keep a distance of at least 15cm from the
product.