NOMAD NM01310785 Base One Max MagSafe Charger User Manual
- June 10, 2024
- NOMAD
Table of Contents
NOMAD NM01310785 Base One Max MagSafe Charger
Product Manual
Base One Max
- UPC: 856500013091, 856500013107
- Model Numbers: NM01309185, NM01310785
- FCC ID: 2AJYRNM01309185
- IC: 27646-NM01309185
Package Contents
- Base One Max
- 2 meter USB-C to USB-C cable
- Requires 30W USB-C Power Adapter (not included)
Specifications
Weight
| ****
847g (1.86 lbs)
---|---
Size
| ****
• 189 mm X 90 mm X 18.3 mm (just the base)
• 189 mm X 90 mm X 47 mm (with Apple Watch charger)
Input __30W
Output
| ****
• 15W charging speed for iPhone
• 5W charging speed for AirPods and other Qi wireless charging devices behind Apple Watch mount
Devices
| ****
• Charges iPhone 8 and later
• MagSafe’s magnetic alignment feature only works with iPhone 12 and later
• Raised MagSafe Charger ensures compatibility with any phone camera thickness
• AirPods with Wireless Charging Case, AirPods Pro, AirPods 3rd Gen
• Apple Watch Series 4, 5, 6 and 7
Product Overview
- Premium glass panel and metal chassis
- Apple MagSale Charger
- Charging cable port (requires 2 meter USB-C to USB-C cable)
- Integrated Apple Watch charging puck & wireless charging for AirPods
- Anti-slip rubber base
Charging Tips
Base One Max features an official MFi MagSafe Charger. To begin charging,
simply center your device on the puck and allow it to snap into optimal
charging position.
Base One Max works with iPhone 8 and later as well any Qi enabled wireless
charging device, but MagSafe magnetic alignment is an added benefit for iPhone
12 and later.
To begin charging on Base One Max’s integrated Apple Watch charger, simply
place your Apple Watch against the puck. Integrated wireless charging for
AirPods.
Disposal of Product and Packaging
Packaging: The inner black cardboard tray is recyclable and can be placed in
your recycling bin. The outer box and attached foam inserts are not
recyclable. These components are disposable in your landfill waste.
Product: Should your product become damaged or defective, and is no longer
covered under warranty, please responsibly dispose of the product and its AC
power adapter at your local e-waste collection center. If an e-waste
collection center is unavailable to you please contact us at
[email protected] and we will accept your used device back for
responsible disposal.
Warranty
Nomad offers a 2-year limited warranty for all Nomad products with the exception of our cables, for which we offer a 5-year limited warranty. Both warranties cover any manufacturing or workmanship defects but do not cover damages that may have resulted from normal wear and tear, misuse/abuse, or modification of the product. If your Nomad product is defective, we will help you to exchange it for a brand new replacement. We cannot guarantee that the exact style or product for a claim will be in stock at the time that your warranty claim is processed, but we wouldn’t want you to be left empty-handed! In this case, we will offer store credit rather than a replacement. The store credit never expires and will be valid for any product found at www.nomadgoods.com. For more information on our warranty policy, please visit our Warranty page. Nomad will not be liable for any damages that may result from the use of any Nomad product. Our warranty does not cover the repair or replacement of property such as electronic devices and/or other personal property.
Contact
Legal
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a ci rcuit different from that to which the receiver is connected.
- Consult the dea ler or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance cm between the radiator & body.
Statement for IC
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s)
Operation is subject to the following two conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with a minimum
distance 10cm between the radiator & body Cet E!qu implement est conforme aux
limites d’exposition IC defines pour un environnement non contr61E!. Cet
equipement doit E!tre installe et utilise avec une distance minimale de 10cm
entre le radiateur et la carrosserie.