CREE LIGHTING Connected Max Smart Tape Light Strip User Guide
- June 6, 2024
- CREE LIGHTING
Table of Contents
SMART TAPE LIGHT STRIP
QUICK START GUIDE
What’s in the box
Please consult this checklist for all parts.
Description
Working voltage: | DC12/24V |
---|---|
Current: | 2Ax 3CH |
Max load: | 12V/36W; 24V/72W |
Product size: | L77 x W35 x H17mm |
Working environment: | Indoor |
Working temperature: | -10°C-40°C (14°F-104°F) |
Humidity: | <80%RH |
Power Connection
Step 1: Connect Tape Light Strip to Controller
The white arrow on the Controller must align with the “+12V” text printed on
the Tape Light Strip
Step 2: Connect Power Adapter to Controller
Step 3: Plug Power Adapter into wall outlet
Attach your Tape Lights
- Clean the surface with a wet, damp cloth. The surface must be dry and free of dirt or oils.
- Peel off the backing strip from the adhesive.
- Place the Tape Light Strip where you want, and gently press down to adhere.
- Connect the Tape Light Strip into the Controller and Wall Plug. Use the supplied Adhesive Pad to secure the controller.
- Do NOT bend Tape Light Strip at LED or connection when going around corners.
Do NOT bend at more than a 90° angle.
Trim Tape Lights / Connect Two Tape Light Strips
Trim Tape Light Strip
Connect two Tape Light Strips
Insert trimmed ends of Tape Light Strip into the supplied Connector.
Important!
Match the “+12V” text printed on the Tape Light Strip to the “+” sign on the
Connector. Close hinged Connector securely.
Repeat for the other end. Use the supplied Adhesive Pads to secure the
Connector to the mounting area.
Link up to 32 feet with the Cree Lighting Connected Max Tape Light Extension
Kit.
Tape Light Strip Control
Adjust with Controller
Adjust with IR Remote
Point the IR Remote at the IR Antenna to control.
Adjust with App
See page 7 to pair Smart Tape Light Strip with Cree Connected Max App
Pairing with the App
Download
The Cree Lighting App is available for both iOS and Android.
Search Cree Lighting in the App Store or Google Play to download the app.
https://apps.apple.com/us/app/cree-lighting/id1511968459
https://play.google.com/store/apps/details?id=com.creelightingtest.smart&hl=en_US&gl=US&showAllReviews=true
Pairing to your network
The Connected Max Smart Tape Light Strip must pair to a 2.4GHz Wi-Fi network.
Once paired, you can control on any Wi-Fi or cellular network. For most users,
pairing will be quick and simple. But depending on the type of wireless router
you have, you may need a little more information to get started. Refer to our
Wireless Router Guide at
creelighting.com/connectedmax for more
information.
NOTE : If you need to re-select the Wi-Fi network, please press and hold
the “Power” button on the Controller for 5 seconds, the device will restart,
and the Tape Light Strip will slowly flash.
How to pair your Tape Light Strip
Download the Cree Lighting app and register your account. Open the Cree
Lighting App, click “Sign Up”, read the “User Agreement Privacy Policy” and
click “Agree.”
Plug the Cree Lighting Connected Max Smart Tape Light Strip you want to pair
into a wall outlet and press the power button. The Tape Light Strip should
start slowly flashing to indicate pairing mode. If the Tape Light Strip is not
slowly flashing, it may need to be reset.
Reset a Tape Light Strip by holding down the Power button on the Controller
for 5 seconds.
Pairing with the App
- In the Cree lighting app, tap the “+ ” sign in the upper right-hand corner of the Home screen.
- The Tape Light Strip you are pairing will appear on the screen, tap “Next.”
- The Wi-Fi network your phone is connected to will appear. You can change your network to a 2.4 GHz network if needed and enter a password.
- The Cree Lighting app will add your Tape Light Strip.
- Once added, you can rename your Tape Light Strip by tapping the pencil icon next to the name – then click “Done.”
Safety Information
CERTIFIED TO UL STD153
CERTIFIED TO CSA STD C22.2#250.4
Only connect to adjacent units
SUITABLE FOR DAMP LOCATIONS
CONVIENT AUX EMPLACEMENTS HUMIDES
SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 40°C
Safety Information
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT
IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
This device is not intended for underwater use. To protect against electric
shock, do not intentionally submerge or immerse your device, battery, or
adapter in water or expose your device or adapter to other liquids. Do not
spill any food or beverages on your device, battery or adapter. Do not attempt
to clean or polish your device, battery, or adapter with or expose your
device, battery, or adapter to oil, lotion, or other abrasive substances.
Don’t expose your device, battery, or adapter to saltwater or other conductive
liquids. Do not expose your device, battery, or adapter to pressurized water,
high-velocity water, or extremely humid conditions (such as a steam room). If
your device, battery, or adapter gets wet, carefully unplug all cables without
getting your hands wet and wait for it to dry completely before plugging it in
again. Do not attempt to dry your device, battery, or adapter with an external
heat source, such as a microwave oven, or hairdryer. To avoid risk of electric
shock do not touch your device, battery, or adapter to any wires connected to
your device during a lightning storm while your device, battery, or adapter is
plugged in. If your device, battery, or adapter appears to be damaged,
discontinue use immediately.
Use only accessories supplied with your device or specifically marketed for
use with your device, to power your device. The use of third-party accessories
may impact your device’s performance. Read all safety instructions for any
accessories before using them with your device.
CAUTIONS & WARNINGS: Not suitable for use with standard dimmer switches.
Not intended for use with emergency exit fixtures or emergency lighting. Risk
of electric shock or burns. Turn the power off and let cool before inspection
or replacement. Do not open – no user-serviceable parts inside. Use only on
120 volt AC circuits. Do not use if the outer shell is cracked, broken or
missing, even if lamp continues to light. Suitable for use in operating
environments not exceeding+40°C (+104°F). Indoor/Outdoor – suitable for damp
locations, but not for use where exposed to weather or water.
Suitable for use in totally enclosed and recessed fixtures.
Not compatible with 5GHz Wi-Fi networks.
Not for use with standard dimmer switches.
Changes or modifications not expressly approved could void your authority to
use this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>