Tribit BTS35 XSound Mega Portable Wireless Speaker User Manual
- June 6, 2024
- Tribit
Table of Contents
Learn more about the Declaration of Conformity, please click the below link to download. http://files.tribit.com/e35-1368n-01-uk-doc.pdf
Tribit
Xsound Mega
Portable Wireless Speaker
BTS35
English User Manual
Safety Precautions
- Avoid dropping.
- Do not disassemble or repair the speaker.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Do not use any corrosive cleanser/oil to clean.
Specification
Bluetooth version: 5.0
Support: A2DR AVRCP, HFP, HSP
Output power: 30W
Frequency response: 60Hz-20KHz
Battery: ( 3.7V 4000mAh*2 ) / 29.6Wh
Music playtime: Up to 20hours ( varies volume level and music files )
Charge time: 4H @ 5V/2A
Waterproof: IPX7
Dimensions: 250mm x 87mm x 80mm Weight: 1000g
What’s in the Box
Overview
-
Power Button / Indicator
-
Bluetooth Button / Indicator
-
MFB
-
Volume –
-
Volume +
-
Light Adjustment Button
-
EQ Mode Button
-
EQ Mode Indicators
-
MIC
-
Hanging holes
-
NFC
-
USB-A charging port ( output )
-
AUX-IN port
-
USB-C charging port ( input/output )
Connections
Bluetooth Pairing
Connection
- Make sure the speaker is on.
- Open NFC on your phone.
- The NFC area on the phone needs to be close to the NFC area on the speaker. The phone will automatically recognize the speaker and request pairing. Click”agree” to complete the pairing.
Broadcast Mode
- Make sure both speakers are on and connect speaker A to the device;
- Press the Bluetooth buttun to both speakers for 5s to enter Broadcast pairing mode, and speaker B will connect to speaker A automatically, the Broadcast Mode is on.
- if you want to connect multiple speakers to the group, press the button 5S, the speaker will connect to speaker A automatically.
Function
| Button|
Operation
---|---|---
Power ON/OFF| | Press the button to turn on/off the speaker
Pair Bluetooth Device| | Press the button to manually enter Bluetooth pairing
mode
Broadcast mode| Press and hold the button Ss to enter Broadcast mode
Disconnect Broadcast mode| Press and hold the button Ss to disconnect
Broadcast mode
Play/Pause| | Press once the button
Next track| Double press the button
Previous track| Press the button for 3 times
Function
| Button|
Operation
---|---|---
Voice dial function| | Press and hold the button for 2s to activate ( your
device must support this function )
Answer/end the incoming call| Press once the button
Reject an incoming call| Press and hold the button for 2s
Volume Down| | Press the button to decrease the volume level
Volume Up| | Press the button to increase the volume level
Light adjustment| | Press the button to switch or turn off the light
EQ mode| | Press the button to switch Music mode, Bass mode, and Audiobook
mode
Indicators
Indicator
| Light|
Status
---|---|---
Power indicator| White indicator keep sturdily on| Power on
Red indicator flashes quickly| Battery low
Red indicator keep sturdily on| Charging( Red indicator will power off when
battery full)
Bluetooth indicator| Blue indicator flashes quickly| Bluetooth pairing mode
Blue indicator flashes slowly| Bluetooth reconnecting
Blue indicator keep sturdily on| Connected
White indicator flashes quickly| Broadcast pairing mode
EQ indicators| Xbase indicator keep sturdily on| Bass mode is on
Music indicator keep sturdily on| Music mode is on
Audiobook indicator keep sturdily on| Audiobook mode is on
Reset
If this speaker has any problem, you can try to press and hold “Volume +” and
“Volume -” buttons simultaneously for Ss to reset this speaker and remove the
old pairing in your Bluetooth device, and then pair again.
Customer Service
- 18-month limited warranty
- For FAQS and more information, please visit: Email: support@tribit.com www.tribit.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful inter-ference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.