IPOTEK LST04-WR Strip Light IM BK Module Instructions
- June 6, 2024
- IPOTEK
Table of Contents
IPOTEK LST04-WR Strip Light IM BK Module
LST04-WR is a smart RGB+W strip light that supports mobile phone WIFI communication and RF remote control. It is equipped with bluetooth assist network pairing, scene mode, dimmer, color adjustment, white light mode, timing and other functions.
Note : 1pcs 5 meter light strip+1 pcs 24V/1A power adaptor+1pcs controller (type C connect the light strip, DC connector connect the power adaptor）+1 pcs transmitter.
Instruction of RF resync code and reset WIFI
- LST04-WR is an intelligent WIFI+RF light strip. The main functions are realized through APP and RF remote control. Before using the WIFI function of this device, the device needs to be added first.
- There is a button on the front of the housing of the controller. There are two types operation of button: single click and long press.
- Single click the button to turn on/off the strip light.The strip light will be lightened when turn on and be dark when turn off.
- When the strip light is turned off, long press the button on the controller, it will enter the pairing network mode. If not enter the pairing network mode, it will enter the EZ mode (universal mode). Continue to long press the button under the EZ mode to enter APmode (pairing network under specified hot spot ); Continue to long press the button will switch between the AP-EZ mode; WIFI will be reset when the network have finished the pairing.
- When the light strip is turned on, long press the button on the controller, it will switch to white light and adjust the brightness.
- RF pairing method: After the light strip power on, press the first row ON/OFF button on the transmitter repeatedly within 30 seconds. If the device is controlled, stands for the syncing is finished.
- RF delete pairing method: within 30S after the controller is powered on, use a toothpick or aneedle to press the pinhole RST button on the back of the transmitter, and the transmitter will have a light flashing indicate the pairing deleted.
- Note : With power OFF memory function, it will be remembered after the device state lasts for 5 seconds, and will be restored to ON/OFF state after the next power ON.
Description of transmitter function:
- ON: turn on the strip light
- OFF: turn off the strip light
- WHITE UP: increase brightness of white light
- WHITE DOWN: decrease brightness of white light
- STROBE COLORS: turn strip on and off as it rotates through colors
- FLASG COLORS: rapidly rotates through colors.
- CHANGE COLORS: change solid colors
-
FADE COLORS: smoothly transitions through colors.
Parameter of transmitter|
effective distance| >30M
power supply| CR2032,3Vbutton battery
stand-by power consumption| 20ua
Description of APP function
- Interface and function introduction
- UI1: Default status of open APP panel: you can turn on and off the light strip by switch.
- UI 2: Palette panel, you can choose the color, brightness, dimming and other parameters.
- UI 3: Scene mode selection panel, click it and enter to the corresponding scene pattern, Click edit to enter the setting interface of this scene mode.
- UI4: Set the timer to turn om or turn off the strip light.
Using Method
Download the APP: Use your phone to scan the below QR code to download the APP, or search for “SmartlinkPlus” to download and install the APP in the APP stores.
WIFI Connect the WIFI: Automatic addition: (bluetooth assist network
pairing)
Open the APP to register and login—-the smart phone should to connect the
WIFI——connect the light strip and controller and power it on—– long press the
button on the controller to enter the EZ mode when the strip light is turned
off—–open the APP and click add device—-Using Automatic discovery, turn on the
Bluetooth—- finish pairing network according to the reminder——–choose the mode
and color after the APP connect successfully.
Manually add device: Open the APP to register and login—–the smart phone should to connect the WIFI ——connect the light strip and controller and power it on—– long press the button on the controller to enter the EZ mode when the light strip is turned off——open the APP and click add device or “+” on the top right corner to finish pairing network according to the reminder——choose the mode and color after the APP connect successfully.
Connect RF transmitter:
Connect the light strip and controller and power it on—–repeatedly press the first row ON/OFF button within 30S—–if the device is controlled, connect successfully—-use the transmitter to choose ON/OFF, color, mode and other functions.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>