Conquer Industry CQL1646-B Bluetooth Speaker Instruction Manual
- June 6, 2024
- Conquer Industry
Table of Contents
Conquer Industry CQL1646-B Bluetooth Speaker
Charging the Speaker
- The speaker works on an internal rechargeable lithium battery. Please charge your speaker fully before first use.
- Insert the small connector of the supplied micro-USB cable into the micro-USB charging port on the side of the speaker. Insert the large connector into the USB port on a computer, a USB charging device or 5V USB adaptor(not included) and plug into a wall socket.
- The LED indicator will turn RED while charging and turn OFF when fully charged.
- Disconnect the USB cable when it is fully charged.
Bluetooth Operation
-
Slide the switch on the side of the speaker to the “On” position to power the speaker on.
-
A tone will be heard and the speaker will enter Bluetooth pairing mode or re-pair to a previously-paired device. The Bluetooth LED indicator will quickly flash BLUE.
-
Set your mobile device to search for Bluetooth devices, when it appears, select
“CQL1646-B” from the list of found devices. You device will pair without a password but if required enter 0000 to finish the pairing. -
Once successfully paired, a tone will be heard and the Bluetooth LED indicator will slowly flash Blue.
-
Start playing music on your device. Keep your device within 10 meters of your speaker to ensure optimal audio quality.
-
Turn the speaker off when not in use by flicking switch to the “Off” position.
Light Operation
Quick press the [ LIGHT ] button to cycle through the speaker light modes. There are 4 LED Light modes in total.
Caution
- This is not a toy. Please keep away from children.
- Please keep away from water/heat.
- Low power may cause poor connection even no working of Bluetooth.
- Do not overcharge the battery.
FCC Statement
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>