TCL X925 Pro Mini LED 8K Google TV User Guide

June 6, 2024
TCL

X925 Pro Mini LED 8K Google TV

USER GUIDE

Register and protect your purchase

TEXT TO REGISTER

TEXT TO REGISTER
Text a photo of the
camera icon to 71403
Or register online at register.tcl.com
Need help? Visit photoregister.com/help or text HELP to 71403

Add a TCL Protection Plan when you register your product and be covered from life’s mishaps
Thank you for choosing TCL. We want your ownership experience to bring you as much joy as the you purchase during registration. Add a TCL Protection Plan within your first 30 days of ownership to receive the best value and we won’t let anything get in the way of your viewing pleasure.

Benefits

DO NOT RETURN TO STORE
WE ARE READY TO HELP
contact us first with any questions
TCL SUPPORT:
support.tcl.com/us
1-877-300-9509

TAKE CARE WHEN REMOVING THE TV

Important Information

Important Information

Warning: The batteries should not be exposed to excessive heat, such as prolonged direct sunlight, open flame, or fire of any kind. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage.

Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical.

Important: This television is designed to sit on a firm, flat surface. Do not place the TV on soft carpeting or on a similar surface as this may cause the ventilation slots located on the bottom of the unit to be blocked and may result in reduced product lifespan from overheating. To assure adequate ventilation for this product, maintain a spacing of one

  1. inch from the top and side of the TV receiver and two
  2. inches from the rear of the TV receiver and other surfaces. Make sure the TV stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off.

This may cause personal injury and/or damage the TV. Refer to the Important —-Safety Instructions on the next page.

The Power button on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used to completely turn off the device. If you prefer to completely turn off the device, you should install the TV in a manner that allows you to disconnect the power cord when desired.

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Keep the apparatus at least 8 inches away from the human body.

Input

Important Safety Instructions

  1. Read these instructions.

  2. Keep these instructions.

  3. Heed all warnings.

  4. Follow all instructions.

  5. Do not use this apparatus near water.

  6. Clean only with a dry cloth.

  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

  10. WARNING: Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

  11. WARNING: The main plug is used to disconnect the device and should remain readily operable.

  12. When not in use, tie up the power cordset with a cable tie or with something similar. It should not be near sharp edges as it may cause abrasion of the power cordset. When put into use again, please make sure the power cordset is not damaged. If any damage is found, please use a replacement power cord specified by the manufacturer or that is identical to the original one.

  13. No open flame sources, such as lit candles, should be placed on, under, or near the apparatus.

  14. Unplug this apparatus during lightning storms or when unused for long periods of time.

  15. Only use attachments/accessories specified by the manufacturer.

  16. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
    or sold with the apparatus. When a cart is used, use caution when moving the
    cart/apparatus combination to avoid any injury.

  17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

  18. For safe operation of the apparatus, please follow these installation requirements:
    Keep at least 2 inches of ventilation space between the rear cover of the apparatus and the wall. Keep at least 1 inch of ventilation space between the apparatus and all other surfaces. Do not allow any of the apparatus’ ventilation openings to be blocked by objects that might obstruct them, such as newspapers, curtains, table-cloths or any other objects. Do not expose the apparatus to any external heat sources. Do not place any heat sources such as candles, lamps, etc. on the apparatus. Do not expose the device to high levels of humidity or to any possible sources of moisture. When disposing of used batteries from the remote control, consult local regulations regarding proper disposal.

  19. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system  is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead in wire to an antenna-discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example:

ANSI

HDMI
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Dolby
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works.
Copyright © 2012-2021 Dolby Laboratories. All rights reserved.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
9-series, include models (85X925PRO)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Supplier Name: TTE Technology, Inc. (dba TCL North America)
Supplier Address: 1860 Compton Avenue, Corona, California 92881, USA
Supplier phone number and internet contact information: 1-877-300-9509 support.tcl.com/us

FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Battery Caution & Disposal Information

  1. For best results, use alkaline type batteries.
  2. Install only new batteries of the same type in your product.
  3.  Failure to insert batteries in the correct polarity, as indicated in the b attery compartment, may shorten the life of the batteries or cause batteries to leak.
  4. Do not mix old and new batteries.
  5. Do not use Rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries.
  6. Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries.
  7. Batteries should be recycled or disposed of as per state and local guidelines.
  8. Do not dispose of batteries in fire.
  9. Replacement of a BATTERY with an incorrect type that can defeat a SAFEGUARD (for example, in the case of some lithium BATTERY types).

ELECTRONICS & PACKAGING RECYCLING INFORMATION
For information on recycling your old TVs, sound bars, and home comfort products, and to find drop-off locations in your area, please visit the “Electronics Recycling” area of the TCL website at www.tcl.com
Click on our convenient interactive map to quickly locate a solution in your community. TCL encourages consumers to always look for a recycling or reuse alternative to discarding televisions and other electronics, and in many areas TCL has programs for consumers to drop-o and recycle televisions free of charge.

Look for convenient How2Recycle® labels on the product box for help preparing your new TV packaging for recycling. These labels show important information identifying the various types of packaging material included with your new TV along with easy-to-understand recycling instructions.

What’s in the box

What’s in the box

Note:
To learn more about how to use cable clips, the Sound Bar connection cable and Subwoofer power cable, please refer to the Wall Mount User manual, the TV Stand User manual, and the Sound Bar & Subwoofer User manual which are individually shipped with the Wall Mount box, TV Stand box, and the Sound Bar & Subwoofer box.

What you need

What you need

For additional support, please visit support.tcl.com/us

Step 2: Power up

In this step, we’ll make sure all systems are a GO!
Connect your power cable to the TV, then plug it in to the wall outlet.
Power your TV remote by inserting the included batteries.
Connect other devices by referencing port label and descriptions on the next page.

Power up

Power Tip! Always replace depleted batteries with two same brand-new batteries from the same manufacturer. Never use damaged batteries.
If your remote gets warm/hot during use, discontinue use and contact customer support immediately at support.tcl.com/us

Step 3: Grab your remote

The TV remote should feel right at home in your hand. We designed it to be incredibly intuitive for watching TV and navigating on-screen menus.

Grab your remote

A. OPTIONS View more options when playing media.
B. POWER Turn TV on and off
C. WATCHLIST Open the watchlist menu or future function D SETTINGS Display the TV settings menu

D. REMOTE MICROPHONE Talk to the remote microphone after pressing the Google Assistant button
E. GOOGLE ASSISTANT BUTTON Press to activate the remote’s Google Assistant microphone. Search content through your voice by holding down the button.

G. VOLUME Raise and lower volume H HOME Return to home screen
I. BACK Return to previous screen J LIVE GUIDE Open live TV EPG

K. MUTE Press the button to mute the sound.
L. VIRTUAL KEYBOARD Open virtual keyboard on screen M QUICK PANEL Display the quick panel
N. TCL HOME Open TCL home on screen

Tip! Follow the on-screen guide to pair the remote control with the TV when pressing the button for the first time.

Step 4: Get to know your TV

Step 4

A. STATUS LIGHT OF HANDS-FREE VOICE CONTROL Glows when you activate the hands-free voice control.(To learn more about the function, go to page 10.)
IR RECEIVER Receives signal from the TV remote.

B. POWER and OPTIONS BUTTON
Press once to open the menu. Short click to change the menu and long click to select.
HANDS-FREE VOICE CONTROL MIC SWITCH Enable or disable the TV’s integrated microphone.
TV SIDE C. POWER PORT Connect your TV to the power source with the included power cable.
D. HDMI PORTS Highest quality audio/video connection. Connect cable box, Blu-ray player, gaming console, or other devices to your TV using HDMI cables.
E. ETHERNET Connect an Ethernet cable to your home Internet router or switch.
F. ANTENNA/CABLE IN Connect an outdoor VHF/UHF antenna or Cable TV feed.
G. OPTICAL (DIGITAL AUDIO OUT) Connect an optical cable to an external digital audio system.
H. HDMI ARC/eARC PORT Connect HDMI ARC/eARC (audio return channel) capable audio devices like sound bars or AV receivers.
I. USB PORT Connect a USB device to access photos, music and movies.
J. AV IN adapter AV Input (analog audio/video).
The AV Input can be used to connect older devices that use analog audio/video outputs. Compatible adapter (not included) connects to the RCA cable
(video – yellow and audio – white and red) that you normally use to connect to that device.
K. HEADPHONE OUT Connect headphones or other external speakers.

Step 5: Complete guided setup

It’s the final stretch-hurray!
Let’s Connect
Once your language has been selected, you can quickly set up the TV using an Android phone with the pre-installed Google Home app.

Let’s Connect

Or you can follow the easy on-screen instructions to setup your TV. If you aren’t ready to connect your TV to a wireless network, you can still use it as a regular TV.

To enjoy all smart features and services on your TCL Google TV, a free Google account, a free
TCL account, and a reliable broadband internet connection, are required.

And setup is done… Congratulations!
Continue using the remote to personalize your Home screen, streaming apps line-up, stream movies, and so much more.

Key things to know:
A paid subscription or other payments may be required for some streaming apps.
Streaming apps availability are subject to change and vary by country.

WE ARE READY TO HELP
contact us first with any questions
TCL SUPPORT:
support.tcl.com/us
1-877-300-9509

TCL North America Limited Warranty

All TCL LCD/LED Models

What your warranty covers

Defects in materials or workmanship to the original owner of this TCL product when purchased as new from an Authorized Dealer of TCL brand products in the United States and packaged with this warranty statement

New LCD/LED Televisions (Non-Commercial Use)
For how long after your purchase:

  • One (1) year from date of purchase for parts and labor for non-commercial use.

New LCD/LED Televisions (Commercial Use)
For how long after your purchase:

  • Six (6) months from date of purchase for parts and labor for commercial use.
  • Commercial use includes, but is not limited to, the use of this product in a commercial or business environment, the use of this product in an institution or for institutional purposes, or other commercial purposes including rental purposes.

What we will do

At TCL North America’s discretion, (1) pay an Authorized TCL Service Center for both labor charges and parts to repair your television, or (2) replace your television with a new or refurbished / remanufactured equivalent value product. The decision to repair or replace will be made solely by TCL North America. See “How to get service”.

How to get service

  • Please have your original purchase receipt or proof of purchase (bill of sale or receipted invoice) which states that condition of the unit (New, Used, etc.), the unit’s date of purchase, place of purchase and model/serial number ready. The model/serial number information can be found on the back of your unit.
  • Call 1-877-300-9509 or visit support.tcl.com/us
  • A representative must troubleshoot your problem over the telephone or through e-mail before receiving service. If it is determined that your unit requires service, the service location will be at the sole discretion of TCL North America based upon the TCL North America Limited Warranty Statement.
  • At the sole discretion of TCL North America, television screen sizes 43” and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/recertified unit. At the sole discretion of TCL North America, television screen sizes 44” through 75” or larger will either be repaired or directly exchanged for a new or refurbished/recertified unit at an Authorized TCL Service Center or repaired in-home. In the event of a service visit where the on-site technician, in his-her sole discretion, deems the home or property conditions to be hazardous and/or unsafe, TCL North America reserves the right to cancel or re-schedule the service visit, or opt for an exchange of the in-warranty unit for a refurbished/recertified unit lieu of the in-home service visit.
  • If repaired at an Authorized TCL Service Center, TCL North America is not responsible for transportation costs to the Authorized TCL Service Center. However, TCL North America will pay for return shipping.
  • TCL North America will provide instructions for packaging and shipping the unit. Units that are improperly packed and damaged during shipping are not covered under your product warranty.
  • Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service.
  • In the event that a unit is to be replaced, a picture of the back of the unit showing the model and serial number and picture of the issue itself may be required.
    PRE-AUTHORIZATION MUST BE OBTAINED BEFORE (1) SENDING ANY PRODUCT TO AN AUTHORIZED TCL SERVICE CENTER, OR (2) OBTAINING ANY IN-HOME REPAIR/REPLACEMENT/ RENTAL SERVICES.

TCL North America Limited Warranty

What your warranty does not cover

  • A unit sold in “As-Is”, “Used”, “Factory Reconditioned”, “Factory Re-Certified”, or “Refurbished”, condition or with faults.

  • Units physically broken during shipment from a Retailer. Please contact your Retailer for assistance. Extended Service Plans purchased from Retailers. Please contact your Retailer for assistance.

  • Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer).

  • Installation and related adjustments, or damage resulting from installation.

  • Damage resulting from non-approved installation or repair methods.

  • Signal reception problems not caused by your unit.

  • Damage from misuse, abuse, neglect, insects, normal wear and tear, cosmetic damage, mishandling, faulty installation, or power line surges.

  • Markings or images on the television’s panel resulting from viewing fixed images (including but not limited to certain 4:3 images on wide screen televisions, or data or images in fixed screen locations from banners, video games, or certain broadcast networks).
    Units that have original factory serial numbers that are unreadable or missing, or that have been changed, defaced, or altered in any manner.

  • Batteries.

  • A television that has been modified or incorporated into other products, or that has had the serial number removed or altered.

  • A unit purchased or serviced outside the USA.

  • Acts of nature or God, such as but not limited to earthquake or lightning damage.

  • Special, incidental or consequential damages.

LIMITATION OF WARRANTY

THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TCL NORTH AMERICA, ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. TCL NORTH AMERICA SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT WWW.TCL.COM TO VIEW THE MOST CURRENT VERSION.

How State Law relates to this warranty

  • Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
  • This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

If you purchased your unit outside the United States or seek warranty coverage outside the United States:

This warranty does not apply. Contact your dealer for warranty information.

Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser.

Broadcasting & Operating Environment

Broadcasting & Operating Environment

Troubleshooting

Having trouble completing the guided setup? Don’t worry, it’s usually an easy fix.

Cannot connect to wireless network (WiFi)

  • Select the correct wireless network name and verify the password entered (case sensitive).
  • Relocate the router from objects that interfere with performance (cordless phones, baby monitors, etc.).
  • Reboot the router by disconnecting the power for more than 2 minutes and reconnect.

Problems connecting my cable box or antenna through a coax cable

  • For best performance, use the HDMI connection. If not available, then:
  • Make sure the cable connections to the TV and your device are securely fastened.
  • Select cable or antenna input.
  • Select the channel scan menu and follow the on-screen instructions to perform a full channel scan.

What is the remote code for programming my Universal or Cable box remote control?

Access parental control

  • The initial personal password for your TV is 1234.
  • You can change the personal password anytime.
  • If you forget your personal password, you can use 0423 to reset.

How do I turn Text-to-Speech (TTS) on or off?

  • Press Settings button ( ) on the remote control
  • Select “Settings”.
  • Select “System”.
  • Select “Accessibility”.
  • Select “TalkBack”.
  • Select “Enable” and press OK to turn it on or off.
  • For more information visit: https://go.tcl.com/tts-atv

How to use voice control through the remote control?

  • In Google TV mode, press and hold the “HOME” and “OK” buttons on your remote at the same time.
  • Keep your remote within 3 ft. of your TV during the pairing process.
  • Then, when the TV display shows that the Google Assistant is ready – speak towards the remote microphone by holding down the Google Assistant button to ask a question or try a suggestion.

How to use hands-free voice control?

Note: Make sure the hands-free voice control mic switch (refer to page 8 for its position) is turned on before using this function.

  • In Google TV mode, press the Google Assistant button on your remote.

  • Select “Yes, I’m in”.

  • Say “OK Google” or “Hey Google” to activate the hands-free voice assistant without using the remote control.

  • Speak towards the TV to ask a question or try a suggestion.
    Follow these steps to enable the always-on hands-free voice control:

  • Select “Settings” from the home screen.

  • Select “System” > “Power & Energy” > “Quick Start” and turn it on.

  • Select “System” > “Power & Energy” > “Screenless Service”.

  • Turn on the “Screenless Service” and you can enjoy hands-free voice control in TV standby mode.

Need more help?
support.tcl.com/us
1-877-300-9509

STUNNING SOUND. MADE SIMPLE.
Complete your home theater with a TCL Sound Bar.

Available features including Dolby Atmos surround sound and exclusive RAY·DANZ technology for a wider soundstage deliver premium sound.
Learn more at TCL.com or visit your favorite retailer.

Copyright © 2021 by TCL. All rights reserved.
TCL and the TCL Logo are owned by TCL Corporation and under license to TCL North America. Other brand and product n ames are the trademarks or registered trademarks of their respective owners.
TCL North America
1860 Compton Avenue, Corona, California 92881, USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals