BASS JAXX EP-0644R TWS Volt Earbuds Instruction Manual
- June 6, 2024
- BASS JAXX
Table of Contents
VOLT
TRUE WIRELESS EARBUDS
INSTRUCTION MANUAL
Thank you for purchasing the VOLT True Wireless Earbuds. This manual provides more information about the wireless earbuds, please read the instructions before using them.
**Product overview
**
Earbuds
Charging Case
- On/Off Button
- LED Indicator 3. Charging Case
- Wireless Charging Area
- Micro USB Charging Pon
- Change LED Indicator
**Instruction Manual
Micro USB Charging cable
**
Package Contents
Volt True Wireless Earbuds x 1 pair
Micro USB Charging Cable x 1
Portable Charging Case x 1
Instruction Manual x 1
Specifications
Driver Diameter 10 mm
Impedance: 32 Ohms
Feet Frequency Response: 20 Hz — 20 kHz
Sensitivity: 100 dB +/- 3 dB
Power Supply:
Li-ion Battery 3.7V 35 mAh (per Earbud) charging function
Li-ion Battery 3.7V 300 mAh (Charging Case)
Play lime: Total 6 Hours (Earbuds playing time is 1.5 Hours and the Charging
Case can provide 3 tines for the earbuds charging)
Charging Time: 2 Hours
Bluetooth Range: 32 8
Micro USB cable included Charging Case with wireless
Power on/off
Power On
Press and hold down the OniOff Button of earbuds for 3 seconds and the LED
will flash.
Power Off
Press and hold down the On? Off the Button of earbuds for 4 seconds and the
LED will turn off.
Pair the wireless earbuds with your mobile device
- Keep the distance between the earbuds and mobile device within 32.8 feet.
- De-activate the Bluetooth function on your mobile device.
- Take both Earbuds out from the Charging case and wait for 3 to 5 seconds for auto-pairing. The earbud has an indicator blinking alternatively in Red and Blue. One of the earbuds will be blinking In Blue slowly when auto-pairing is done successfully on UR earbuds.
- Activate the Bluetooth function on your mobile device and select • VOLT TViS • from the list shown.
- After pairing is successful, both earbuds will start blinking slowly in blue.
‘Attention: If the auto-pairing is not successful, manual pairing between earbuds is essential by following the below procedures:
- Make sure the earbuds are charged.
- Oe-activate the Bluetooth function on your mobile device. (If you had been pawed the earbuds to some other mobile devices) nearby. please be sure to de-activate those device(s) too).
- Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto-pairing. (Keep the Bluetooth function off on your mobile device before this operation.)
- Activate the Bluetooth function on your mobile device and select ‘ VOLT TWS’ from the list shown.
- After pairing successfully. both earbuds will start blinking slowly In blue.
Reconnect the wireless earbuds to your mobile device
when powered on, the wireless earbuds will automatically connect with the last
successfully paired device.
Disconnect the wireless earbuds from your mobile device
Power off the wireless earbuds; Switch off the Bluetooth on your mobile phone,
or Leave the earbuds 60ft away from your mobile phone or further.
Answer / Reject a call
When receiving a call, press the On/Off Button once ( on either earbud) to
accept the call. or answer the call normally via your mobile phone. Press and
hold 2 seconds to reject it.
End a call
To end the call, just press the On/Off button at any side of the earbud with a
Beep sound to end it.
F unctions
Pause! Play Music: Short Press on On/OFF Button Go back to the previous song:
Press Left On/Off Button for 1 second. Advance to next song: Press Right
On/Off Button for 1 second. Volume up: Double click Right On/Off button to
increase Volume down: Double click Left OnrOff to reduce
Charging your Earbuds
- Open the charging case cover.
- Insert the Dual Earbuds into the charging case.
- The earbuds will start the charge automatically.
- The LED indicator light will be turned to Red when charging your earbuds.
- Once fully charged, the LED will be off.
Recharge the Charging Case
Method 1
For your safety please always uses the appropriate 5V input charger/Adapter to
charge the product.
DO NOT USE Quick Gorging USB Adapter to charge the product as it might
damage the product
- Use the Micro USB charging cable provided with the packaging.
- Connect the Micro USB plug to the Micro USB charging port on the charging case, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
- The LED on the charging case will be on during charge.
- Once fully charged, the LEO will be off.
Recharge the Charging Case
Method 2
You can also charge your Charging Case by wireless charging pad as below way.
Put the FRONT of the charging case on the wireless charging pad as picture
shown
A wireless charge will be cut off automatically once USB charging is input from the USB port. ‘Wireless charging pad is not included
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the charging case and earbuds if it has been not used for more than 12 months.
FAQ****
If the wireless earbuds cannot be paired with your device, please try the
following:
Ensure that your earbuds are in pairing mode or reconnection mode Ensure
that the Bluetooth search function of your mobile device is activated.
If the wireless earbuds will not turn on:
Make sure the earbuds are fully charged.
Can I change the battery for the charging case and earbuds?
The charging case and earbuds use a built-in non-detachable battery which
cannot be removed.
If the charging case cannot be recharged:
If you use a power outlet. ensure that the power supply is connected
securely and the outlet works. If you use a computer, ensure that it is
connected and the USB port is powered. If you use a wireless charging pad,
make sure the correct location of the charging case is put on the charging pad
and the charging pad is powered.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is 5V 1A.
-In order to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.
-Only charge the product at ambient temperatures between 10 deg °C! 50 deg °if and 40 deg °C/104 deg °F.
– Do not heat above 70 deg °C!158 deg °F, eg. Do not expose to sunlight or
throw into fire.
-Switch off the product after use.
-Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
-In extreme cases, abuse or misuse of the Lithium battery packs can lead to an explosion, heat generation, fire development, or smoke development.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements The
device can be used in portable exposure conditions without restriction.
FCC ID:2ADM5-EP-0644L(left earphone)
FCC ID:2ADM5-EP-0644R(right earphone)
WARNING: This product can expose you to chemicals including Bisphenol A (BPAI), which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Wamings.ca.gov.
ITEM# EP-0644
Keep all relevant information for future reference
Made in China
Documents / Resources
| BASS
JAXX EP-0644R TWS Volt
Earbuds
[pdf] Instruction Manual
EP-0644R, EP0644R, 2ADM5-EP-0644R, 2ADM5EP0644R, EP-0644L, EP0644L, 2ADM5-EP-
0644L, 2ADM5EP0644L, EP-0644R TWS Volt Earbuds, TWS Volt Earbuds, Volt
Earbuds, Earbuds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>