Shenzhen Esorun Technology MAG5000W Magnetic Wireless Power Bank User Manual

June 6, 2024
Shenzhen Esorun Technology

User Manual

In the box:

  User manual x 1

  Wireless power bank X 1

  Micro-USB charging cable X 1

Product Dia gram

  Note: Thank you for your acquisition of this compact power bank wireless charger, compatible with all Qi devices like Samsung S7/S7 Edge, S8/S8 Edge, S9/S9 edge, 510/510 edge, S20 Series, Note 20 Series, iPhone 8/8 Plus, iPhone X, iPhone XR,iPhone XS, iPhoneXS MAX, iPhone 11, iPhone 11 Pro, iPhone 11 Pro MAX,iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max. For optimum performance and safety, please read this manual carefully before using this product.

Specifications:

Ca capacity: 5000mAh Micro B Input: 5V/2A Type-C Input: 5V/2A Transmission Distance: 6mm
USB Output: 5V/2A Wireless Output: 5V/1A Charging Efficiency. 75% Product size: 97.5 x 63.8 x 17 mm

How to Use

Switch

Use of switches
Press the switch once to turn on the product, the battery indicator will light up. Then it is in the standby state and other devices can be charged.In the power-on state, hold the
power button for 5 seconds to turn off the power.
Tips: In the standby state, if you do not perform other operations, it will automatically shut down after about 20 seconds. If you need to use it again, please press the switch again.

Power Rate Indicator

The battery indicator is steady blue.

Wireless Charging Status Indicator
The green light on, wireless charging. Red light on, wireless charging is standby. Red light and the green light flashes alternately, wireless charging is abnormal

Wireless Charging

Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be SW.

 When the product is out of power or low battery, then you need to charge the product. You can use the standard USB charging cable with a Micro USB connector to connect this product, and plug the USB A into a 5V/2A charging device such as a car charger, household appliances, etc. to charge the product.

  1. insert the USB charging cable USB A end into Output.
  2.  Plug the other end of the cable into a terminal such as a mobile phone.
  3. Press the switch button and the power is discharged to charge the terminal such as a mobile phone.

Product name:| Mag5000W-|

Specification:

|
---|---|---|---

Version:

| 20201226| 128g Double copper black and white double-sided printing half fold

size: 

90×140 mm

Make:

|

material
deficit·

|

10.0105.072 mag 50000w
*128g 90140mm**

Warning

When your wireless power bank works improperly

  1. Make sure there are no clutters on the wireless power bank.
  2. When the wireless power bank is over-heating, take your mobile device away from your wireless power bank, and the power bank will stop charging automatically when overheating. Please try charging again when the wireless power bank cooling down.

Remarks
It’s normal that this charger and your smartphone will be hot under operating conditions, and it may be hotter when charging and using at the same time (such as playing music)

Made in China

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals