LIDEKA 25308 LED RGB Light Strip User Manual
- June 9, 2024
- LIDEKA
Table of Contents
LIDEKA 25308 LED RGB Light Strip
Features
Supports Wi-Fi 2.4GHz 802.11 b/g/n wireless networks.
Supports remote/local control through 2G/3G/4G/5G networks.
Added devices can be shared with family members.
Specifications
Voltage: DC 5–24V
Max Current: 3A
Max Power: 72W
Controller Size: L50 × W50 × H15mm
Humidity: ≤ 80% RH
Working Temperature: -10˚C – 45˚C (14˚F – 113˚F)
Package Contents
-
Controller
-
3M Adhesive Tape
-
24-Key Remote Control
-
Adapter
-
LED Strip Roll
-
User Manual
Installation
Adding the Device to the App
DOWNLOAD THE APP
Scan the provided QR code to download the app on your smartphone. Available
for Android and iOS.
Scan this QR code to download the app
REGISTRATION
Use your mobile number or email address to register. A verification code will be sent to you.
ADD DEVICE
a. Power on the strip light and open the app.
b. Make sure GPS, Wi-Fi, and Bluetooth are enabled.
c. Tap ‘+’ on the top-right corner of the app to start adding your
device.
d. The app will search for the nearby device automatically. Please wait a
few seconds.
e. After the device is found, select your 2.4G Wi-Fi and input the
password to register the device to the cloud service.
-
Register using your mobile number or email address
-
Tap ‘+’
-
Auto Discover
-
Device Found
-
Select your 2.4G Wi-Fi Network and enter its password
-
Initializing Device
-
Device successfully added
RESETTING THE DEVICE
Reset the device during the following situations:
a. The device can’t connect to your app.
b. The device will be added to a different account.
c. You change your Wi-Fi configuration, such as the Wi-Fi name or
password, or when you replace your router.
Reset the device using one of these two methods:
Method 1: Power Button
Press the power button for at least 5 seconds until the strip lights start
blinking red. This resets the device to pairing mode. Add it to the app again.
Method 2: Remote Control
Rapidly press the Wi-Fi button on the remote control three times in less than 1.5 seconds until the strip lights start blinking red. This resets the device to pairing mode. Add it to the app again.
CONTROLLER BOX/REMOTE CONTROL
APP CONTROL/VOICE CONTROL
Linking Your Account to Echo
OPEN ALEXA APP
Open the Alexa app on your smartphone and tap on the menu on the upper left corner.
GO TO SKILLS
From the menu, select Skills from the options.
SEARCH ‘SMART LIFE’
Type “Smart Life” in the search bar and press the search icon.
CHOOSE THE ‘SMART LIFE’ SKILL
Tap the Smart Life result.
TAP ‘ENABLE’
LOG IN
Enter your account information and tap on ‘Link Now’ to link your account to your Amazon account.
SUCCESS
Your Amazon Echo is now connected to your Smart Life system.
DISCOVER DEVICES
There are two ways to discover devices:
- Alexa App: Home › Smart Home › Discover Devices
- Voice Control: ‘Alexa, discover devices.
Control Devices using Voice Commands
Now you can control your smart devices through Amazon Echo. Speak to Echo with the following commands:
- Alexa, turn on/off the strip light.
- Alexa, set strip light brightness to 50 percent.
- Alexa, brighten the strip light.
- Alexa, dim the strip light.
Linking Your Account to Google Home
Make sure you have successfully set up Google Home.
OPEN GOOGLE HOME
Click ‘+’ on the menu of the Google Home app home page then click ‘Set up device’ and select ‘Works with Google’.
FIND ‘SMART LIFE’
Select ‘Smart Life’ from the list, select your region, input your account and password, and then click ‘Link Now’. After assigning rooms for your devices, your devices will be listed in the Home Control page.
5CONTROL YOUR SMART DEVICES
You can now control your smart devices through Google Home. Speak to Google with the following commands:
- OK Google, turn on/off the bedroom light.
- OK Google, set the bedroom light to 50 percent.
- OK Google, brighten the bedroom light.
- OK Google, dim the bedroom light.
- OK Google, set the bedroom light to red.