Tenda MX6 nova AX1800 Whole Home Mesh Wi-Fi 6 System Installation Guide
- June 6, 2024
- Tenda
Table of Contents
Tenda MX6 nova AX1800 Whole Home Mesh Wi-Fi 6 System
Package contents
MX6 (3-pack) & EX6 (3-pack)
- Mesh6X x 3
- Power adapters x 3
- Ethernet cable x 1
- Quick installation guide x 1
MX6 (2-pack) & EX6 (2-pack)
- Mesh6X x 2
- Power adapters x 2
- Ethernet cable x 1
- Quick installation guide x 1
Appearance
Button
|
Description
---|---
MESH| MESH button.
- As a networking button: Press this button on this device for about 1 to 3 seconds. The LED indicator blinks yellow fast, which indicates the device is searching for another device to form a network. Within 2 minutes, press the MESH button of another device for 1 to 3 seconds to negotiate with this device.
- As a de-networking button: Press this button for about 8 seconds and release it when the LED indicator blinks red fast. The node is restored to factory settings, and also removed from the network and no longer automatically joins in again.
Note
Do not hold down the MESH button for 8 seconds if unnecessary.
RESET| Reset button.
When the device completes startup, hold down this button using a needle-like
item (such as a pin) for about 8 seconds, and then release it when the LED
indicator blinks red fast. The device is reset successfully
Connect the primary node
*Choose one device from the kit to connect to the internet as the primary node in the network.
| Tips
If you do not use the modem for internet access, please skip step 1 and 3.
---|---
-
Power off your modem.
-
Use the included Ethernet cable to connect the WAN/LAN1 port to your
modem or the Ethernet jack. -
Power on your modem
-
Power on the primary node, and wait until the LED indicator blinks green.
Connect the primary node to the internet
Method 1: Setup through Tenda WiFi App
-
Download the Tenda WiFi App onto your mobile device by searching for
Tenda WiFi in App Store or Google Play or by scanning the QR code. Then install the Tenda WiFi App.| |
---|---|---
-
Connect the mobile phone to the WiFi network of the primary node. The SSID and password can be found on the bottom label of the device.
-
Run the Tenda WiFi App and follow the onscreen instructions to connect the device to the internet. After the device is connected to the internet, its LED indicator lights solid green, and the device has become the primary node in the network.
Method 2: Setup through web UI
-
Connect the client to the primary node.
Method 1: Connect the wireless client such as mobile phone to the WiFi network of the the primary node. The SSID and password can be found on the bottom label of the device.
Method 2: Use an Ethernet cable to connect the computer to the LAN2 or LAN3/IPTV port of the primary node.
-
Start a browser on the client and enter tendawifi.com in the address bar
to access the web UI, and follow the onscreen instructions to connect
the device to the internet.
| Tips
If you cannot log in to the web UI, refer to Q3 in FAQ.
---|---
III Extend network
-
Place the other devices in the kit within 3 meters from the primary node to power them on. Wait for about 2 minutes. When the LED indicators of these devices light solid green, the networking is successful and these devices become secondary nodes in the network.
-
Please refer to the following relocation tips to locate the secondary nodes to a proper position:
• Ensure that the distance between any two nodes is less than 10 meters.
• Keep your nodes away from electronics with strong interference, such
as microwave oven, induction cooker, and refrigerator.
• Place the nodes in a high position with few obstacles. -
Power on the secondary nodes again till these LED indicators blink green slowly. The MX6 (3-pack) is taken as an example here.
| Tips
If the LED indicator of secondary node keeps blinking green slowly for more than 5 minutes, relocate the secondary node and move it closer to the primary node.
---|---
- Observe the LED indicator of the secondary nodes until the LED indicator lights one of the following color
| Solid green| Networking succeeds. Excellent connection quality
---|---|---
| Solid yellow| Networking succeeds. Fair connection quality.
| Solid red| Networking succeeds. Poor connection quality - If the secondary node’s LED indicator lights solid red, relocate it
according to step 2 in III Extend network to get an optimal connection quality.
Done.
-
To access the internet with:
– Wired devices: Connect to the LAN ports of your nodes.
– Wireless devices: Connect to your WiFi network using the SSID and
password you set. (All nodes share the same SSID and password -
If you configure the nodes using the Tenda WiFi App and you want to
manage the network remotely, tap on the App home page and use your account to log in.
FAQ
Q1: Can I add another new set of nodes to expand my network coverage?
A1: Yes. Try the following solutions:
Method 1: Press the MESH button for about 1 to 3 seconds. The LED
indicator blinks yellow fast, which indicates the device is searching for
another device to form a network. Within 2 minutes, press the MESH button
of another device for 1 to 3 seconds to negotiate with this device.
Method 2: Run the Tenda WiFi App and manage the network, tap +
on My WiFi page, and follow the on-screen instructions.
Method 3: Log in to web UI of the node, tap + on Network Status
page, and follow the onscreen instructions.
Q2: How to restore my device to factory settings?
A2: When your device is working properly, hold down the RESET button
of your device using a needle-like item (such as a pin) for about 8 seconds,
and release it when the LED indicator blinks red fast. When the LED indicator
lights solid green, your device is reset successfully.
Q3: I cannot log in to the web UI by visiting tendawifi.com, what should I
do?
A3: Try the following solutions:
-
If you are using a wireless device, such as a smart phone:
– Ensure that it is connected to the WiFi network of the node. – Ensure that the cellular network (mobile data) of the client is disabled -
If you are using a wired device, such as a computer:
– Ensure that tendawifi.com is entered correctly in the address bar, rather than the search bar of the web browser.
– Ensure that the computer is connected to the LAN port of the node properly using an Ethernet cable.
– Ensure that the computer is set to obtain an IP address automatically and obtain DNS server address automatically.
If the problem persists, please reset the node and try again.
Reset method: When the device completes startup, hold down the RESET
button using a needle-like item (such as a pin) for about 8 seconds, and then release it when the LED indicator blinks red fast. The device is reset successfully.
Q4: The device failed to be detected by the Tenda WiFi app upon my
first time of using the device, what should I do?
A4: Try the following solutions:
- Ensure that your mobile phone is connected to the default WiFi network of the device.
- Ensure that the network permissions of Tenda WiFi app is enabled, you can tap Settings > Tenda WiFi to enable it.
If the problem persists, please reset the node and try again.
LED indicator status
After the device is powered on for about 40 seconds, the system completes startup. The status of the LED indicator is shown in the following table.
| LED indicator status | Description |
|---|---|
| Solid green | Connected to the internet. |
| Solid yellow | Networking succeeds. Fair connection quality |
| Solid red | Networking succeeds. Poor connection quality |
| Blinking green slowly | Connecting to other nodes or waiting to connect to |
other nodes.
Blinking yellow fast| Networking by MESH button.
Blinking red slowly| Failed to connect to the internet.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures. Operations in the 5.15-5.25GHz band are restricted to indoor use
only. This equipment should be installed and operated with a minimum distance
25cm between the device and your body.
The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2) To
avoid unnecessary radiation interference, it is recommended to use a shielded
RJ45 cable.
Declaration of Conformity
Declaration of Conformity Hereby,
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment
type Mesh6X, MX6, EX6 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: http://www.tendacn.com/en/service/download-
cata-101.html
Operating Frequency:
2.4 GHz: EU/2412-2472MHz（CH1-CH13)
5 GHz: EU/5150-5250MHz(CH36-CH48)
EIRP Power (Max.):
2.4 GHz: 19.86dBm
5 GHz: 22.96dBm
Software Version: V16.03.16.X
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device is for indoor usage only. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment should be installed and operated with minimum distance
25cm between the device and your body.
Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operating frequency: 2412-2462MHz, 5150-5250MHz, 5725-5850MHz NOTE: (1)
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary
radiation interference, it is recommended to use a shielded RJ45 cable.
Caution:
Adapter Model: BN067-A18012E, BN074-A18012B, BN067-A18012U
Input: 100-240V AC 50/60Hz 0.6A
Output: 12V DC, 1.5A
Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
DC Voltage
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
Temperature: 0°C-40°C Humidity: (10 – 90) %RH, non-condensing
For EU/EFTA, this product can be used in the following countries:
**Technical Support
**
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052
USA hotline: 1-800-570-5892
Toll Free: 7 x 24 hours
Canada hotline: 1-888-998-8966
Toll Free: Mon – Fri 9 am – 6 pm PST
Hong Kong hotline: 00852-81931998
Global hotline: +86 755-2765 7180 (China Time Zone)
Website: www.tendacn.com
E-mail: support.nova@tenda.com.cn
Copyright
© 2021 Shenzhen Tenda Technology Co., Ltd. All rights reserved. Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>