Baseus SIMU ANC True Wireless Earphones User Manual
- June 6, 2024
- Baseus
Table of Contents
Baseus SIMU ANC True Wireless Earphones User Manual
Product Appearance
Music mode:
Double-Click left or right earphone (L or R): Play/Pause
Triple-click left earphone IL): previous song
triple-click right earphone (R): ANS song
Call mode:
Double-click left right earphone (L or R): answer/hang up
Long press left or right earphone (L or R): reject a call
Active Noise Cancellation (ANC) (Ambient Sound Mode(ASM) function switch:
LOng press left or right earphone (L or R):
ANCOR —ANA ON—ANC On
Battery percentage <2096. red light flashes.
Battery Percentage >21 white light normal on. Charging cast charging; Red
light normal on.
Charging case fullycharged: While light normal on.
Product Operating Method
Step 1-Turn on The earphones automatically enter the power-on state after open
the lid of the charging case.
Step 2-Search and Pairing Turn on the Wireless function of the mobile phone,
and enter pairing mode.
Step 3-Wireless connectivity Select the device model: Baseus SIMU SI .
Step 4-Shutdown Place the earphones back in the charging case and close the
lid to complete the shutdown.
Note: The ANC mode is automatically turned on when turning on the earphones. If you don’t want this mode, please turn it off by long press left or right earphone (L or R).
Declaration on hazardous substances and elements contained in electronic
products
Hazardous substances or elements| | | | |
---|---|---|---|---|---
Part Description| Lead
(Pb)| Mercury
( Hg)| Cadmium
( Cd)| Hexavalent chromium (Cr VI))| Polybrominated
biphenyls
(PBB )| Polybrominated
diphenyl ethers
(PBDE)
PCB| X| O| O| O| O| O
Plastic| O| O| O| O| O| O
Battery| O| O| O| O| O| O
Accessory| O| O| O| O| O| O
This form is compiled in accordance with SJ/T 11364.
O:It indicates that the content of the harmful substance in all homogeneous
materials of the component is below the limit specified in GB/T 26572
standard.
X: The content of harmful substances in at least one homogeneous material of
this part exceeds the limit stipulated in GB/T 26572 standard. This product
complies with EU RoHS 2.0 Directive (2011/65/EU) Warm
Tip: The 5-year icon refers to the “effective life of environmental
protection”, not the product quality assurance period. Electronic products all
contain harmful substances such as lead, mercury and cadmium. Once they are
overused, harmful substances may leak or mutate, cause pollution to the
environment, or cause serious damage to people and property. The term of
“environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Product safety information
Please read all Instructions and warnings before using this product. Non- standard use will damage the product or personal safety.
- The battery is included in the product. Pkasedo not eimose it to sunlight. fire or similar overheating; Do not store the product in high temperature. strong light and strong magnetic field. Do not place it Mother harsh environments such as fire source. ll water enters, dry it naturally and use It again.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning. to which out company mil not bear any legal liability.
- Disintegration of this product by non-professionals strictly prohibited.
- Used household appliances or loads in excess of the output current of this product shall be avoided no output due to circuit protection).
- Intense physical actions Including knocking, throwing, trampling °nand squening, etc. shall be avoided.
- the ambient temperature of product Is 0-35’C.
FAQs
-
Why my product cannot be turned On/Off?
A: I) Make sure that the charging case and the earphones have battery eft, open the Ihl of the charging case and the earphones will automatically turn on; 2) Make sure that thecharging case and theearphoneshave battery left, put the earphones back in the chargjngcase, and close the lid to turnoff the earphones automatically, 3) When the chanttng case is out of battery, please turn oil the wireless function on your phone and the earphones will turn off automatically in 5 minutes; 4)1(ndthecharging area of the earphones and Pogo pin of thecharging case clean, and regularly clean them with dry cloth. -
Why ANC function is not effective?
A: I)Choose the best ear tip size, seat them firmly and adjust the angle for a comfortable fit; 2) In the environments with moderately loud noisesk.graffices and cafes), ANC function is more effective, 3) In the environments withconstant and loud noises, ANC function can only eliminate most of the noise, it is not recommended to use them in this environment. -
Why is the touch function not sensitive?
A: I) Make sure that the functional erns of the earphones is clean and water- free; 2) Make sure that the fingers to touch the earphones are without water or other foreign objects; 3) Make sure that the touch position is correct, and complete the quick double-clkk or triple-Click operation within 0.5s; 4) If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore factorysettings before connecting. -
Why can’t my product connect to the wireless device again?
A 1) The earphones will be disconnected d they are out of the connection range of 10 meters. The earphonesnilautomaticallyshut down if they are not back to the connection range within 5 minutes; 2) If the earphones fail to connect to the wireless device again within 5minutes. please put the earphones into the chargjng case and close the lid. and the take them out. -
Why is one of my earphones without sound after I take them out?
A: I) If this problem occurs, please put the earphones into the charging case and close the lid, and the take them out: 2) If it is unable to canned after the above operation, please turn off the YAreless of other mobile phones close to the mobile phone and restore factory settings before connecting; -
How to burn in the earphones for better sound quality?
A: 1) Play music at one-third of normal volume for 12 hours (softer music); 2) Play music at two-thirds of normal volume for 12 hours (any music except for typical rock music); 3) Play music at normal volume for 72 hours (your favourite music); 4) Play music at three-fourths of normal volume for 24 hours (your favourite music). -
The mobile phone cannot find the Bluetooth headphone, the Bluetooth connection is unstable or disconnected during use, thus resulting in unsmooth sound/interruption?
A: 1)Please do not exceed the Wireless connection distance of the mobile phone, so as to avoid interference from the wall or the human body; 2) Please make sure the earphone has enough power, and re-enter the pairing mode to connect; 3) If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore factory settings before connecting; 4) Due to the property of the Wireless earphone, the electromagnetic waves in your area may interfere with the Wireless connection, resulting in sound problem or disconnection, please stay away from such areas before connecting.
Product Parameter
Name: Baseus SIMU ANC True Wireless Earphones
Model No.: Baseus SIMU Si Pro
Material: ABS+PC
Version: V5.2
Communication distance: 10m
Standby time: 300 hours
Music time: 4.5 hours (70% of the volume, ANC On)
Music time: 5 hours (70% of the volume, ANC Off)
Music time with a charging case: 20-24 hours
Battery capacity: 40mAh/0.148Wh (earphones) 380mAh/1.406Wh (charging case)
Earphone rated input: DC5V-40mA
Charging case rated input: DC5V-370mA
Earphone rated consumption current : 9mA
Charging case rated current consumption: 100mA
Charging time: about 1.5 hours
Frequency response range: 20Hz-20kHz
Charge interface: Type-C
Suitable for: Compatible with all wireless devices
Size : 614624mm
Weight:52g
The above data are measured by the Baseus laboratory , the actual use will be slightly different depending on the specific circumstances.
Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park,
No.2008, Xuegang Rd, Gangtou Community,
Bantian Street, Longgang District, Shenzhen
Hotline: +86-4000-712-711
Website: www.baseus.com
Copyright 2010-2021 Shenzhen
Times Innovation Technology
Co., LtdAll Rights Reserved
It is only suitable for use in areas with an elevation of 2000 meters and
below
Warning
Please follow the above safety instructions otherwise it will cause fire,
Aelectric shock,damage or other damage.
P82857Z Designed by Baseus Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AY37-S1PRO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>