Baseus Wireless Charger Gravity Car Mount User Manual
- June 6, 2024
- Baseus
Table of Contents
Baseus Wireless Charger Gravity Car Mount User Manual
Please read this user manual completely and keep it properly
Product introduction:
Thank you for choosing Baseus products. This is a gravity linkage car mount holder with wireless charging. Please read the manual carefully before using the product and keep it with proper care for future reference.
Product parameters
Scan to View User Manual
https://manual.baseus.com/server/manual/NwSRFQ1B
Name: Baseus Wireless Charger Gravity Car Mount
Model No.: WXYL-1 WXYL-01 WXYL-OS
Material: ABS
Process: Injection molding
Input: 5V=2A,9V=1.7A
(It is recommended to use with QC2.0/QC3.0 adapters)
Output: lOW (Max)
Install way: Clamping type
Fixed position: Air outlet
Suitable for: Mobile phones with wireless charging function (4.0-6.5 inch)
Working temperature: 0-35°C
Product list
Product parameters
1nstructions for use
5.1 Select an appropriate location on an air vent to fix the holder.
5.2 Connect the data cable to power on, and put the phone on it.
Instructions on Indicator Lights
PLED lights
Power on through the data cable and the pure green LED light turns on; It
flashes 2 times and goes out, the input power detection, about 2-3 seconds
after entering the standby state; When the sensor to the wireless charging
device, the pure green LED lights up; The solid green LED turns off when the
device sends a data signal of fully charge; The solid green LED flashes when a
metal foreign object (FOD) is detected.
Precaution
7.1 When using the wireless charger to charge a phone, the surface temperature
of the phone will increase to a certain extent, which is a normal phenomenon
and will not affect the service life and performance of the device.
7.2 When using this product, please use an adapter with an output voltage of
5V=2A, 9V=1.7A, or a fast-charging adapter.
7.3 Do not place metal objects on the contact surface during charging, such as
iron pieces, rings, metal protective shells, etc.
7.4 This product has input overcurrent and overvoltage protection. Improper
use will cause shutdown or reduction of output power, please check whether the
equipment is used abnormally or improperly.
7.5 Please use the product at the ambient temperature of 0-35°C. Do not expose
it to the sun, and use it in damp, dirty, and hot environments. Do not put the
product in water, fire, too high (>40°C) and too low temperature (<-20°C)
environment, and keep it away from children.
7.6 Please clean the surface with a dry and soft cloth, and do not use
chemicals, soap, or detergents to clean the product. 7.7 Do not disassemble,
modify or repair the wireless charger by yourself.
7.8 Do not place magnetic stripe cards (including credit cards, phone cards,
bank passbooks, and registration cards) close to the device being charged to
avoid the magnetic stripe being damaged by the magnetic field generated by the
device.
7.9 The improper use of this product by users may lead to a decrease in the
service life or damage, and the results due to improper use is neither covered
in the warranty nor the responsibility of the manufacturer. Thank you for your
understanding.
Declaration on Toxic or hazardous substances and elements contained in electronic products
This form is compiled in accordance with SJ/T 11364.
0: It indicates that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T 26572 standard.
This product complies with EU RoHS 2.0 Directive (2011/65/EU)
Warm Tip
The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury, and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term “environmental protection use” means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Copyright©2010-2021 Shenzhen Times Innovation Technology Co., Ltd. All Rights
Reserved
Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: Q/SSCZ 010-2019
Hotline: +86-4000-712-711 Website: www.baseus.com
Warning Please follow the above safety instructions otherwise it will cause fire, electric shock, damage, or other damage.
PB1388Z
Designed by Baseus
Made in China
http://weixin.qq.com/r/JnXp8RfE6kqVrVOS9yA0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>