Tenda Smart WiFi Plug Installation Guide

Tenda Smart WiFi Plug Installation Guide

Getting to know your device

Configuring the device

Note:

• The Smart Wi- Fi Plug only supports 2.4 GHz WIFI network.
• The default SSID (WIFI name) of the Smart Plug Is Tenda _Smart Plug _xxxx. xxxx Indicates the last four characters of Its MAC address which can be found on the device.

1.  Download the Tenda Bell App onto your mobile WiFi -enabled device, such as a smart phone, by searching for Tenda Bell In the App Store or Google Play or by scanning the QR code. Then, Install the App.
2. Follow the Instructions In the App to configure your Smart Plug.

http://download.cloud.tenda.com.cn/down/Beli

FAQ

01: What devices can I control with the Smart Wi-Fi Plug?
A1: You can control desk lamps, coffee makers, humidifiers, tower fans, and any other small household appliances whose rated power does not exceed the maximum power of the Smart Plug.

02: What should I do when the LED Indicator of the Smart Wi-Fi Plug lights solid orange?
A2: Try the following solutions:

• Check whether the WIFI network of your wireless router Is enabled. If not, enable It.
• Check whether the WIFI name or password of your wireless router Is changed. If so, reset the Smart Plug, and connect It to your wireless route raga in with the new WIFI name or password.
• Reset the Smart Plug, and reconfigure It using the Tenda Bell App. Reset method: Hold down the power button for about 5 seconds and release It when the LED Indica tor blinks orange.

03: How to control the Smart Wi-Fi Plug with voice-activated devices, such Amazon Alexa or Google Assistant?
A3: In your Tenda Bell App, tap the Smart Plug In the Device page, then (for Amazon Alexa) or (for Google Assistant) to get the help.

For more questions, please visit www.tendacn.com/en/faq/default.html to get online supports.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This equipment should be installed and operated with minimum distance 20cm between the device and your body.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible.
For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.

Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type SP3 is in compliance with Directive 2014/53/EU.
Operating Frequency: EU/2400-2483.SMHz (CH1-CH13) EIRP Power (Max.): 12.9dBm Software Version: V1.1.0.7

Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type SP6 is in compliance with Directive 2014/53/EU.

Operating Frequency: EU/2400-2483.SMHz (CH1-CH13) EIRP Power (Max.): 12.9dBm Software Version: V1.1.0.7

The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download- cata-101.html

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU In order to be recycled or dismantled to minimize Its Impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. Operating Temperature: orc – 40″C Operating Humidity: (10%- 90%) RH, non-condensing

Technical Support
Shenzhen Tenda Technology ca., Ltd.
6-8 Floor, Tower E3, N0.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052

USA hotline: 1-800-570-5892
Toll Free: Dally-9am to 6pm PST

Hong Kong hotline: 00852-81931998
Global hotline: +86 755-2765 7180 (China Time Zone)

Canada hotline: 7-888-998-8966
Toll Free: Mon – Fri 9 am – 6 pm PST

Website: www.tendacn.com
E-mail: support@tenda.com.cn

Copyright

© 2019 Shenzhen Tenda Technology ca., Ltd. All rights reserved.
Tenda Is a registered trademark legally held by Shenzhen Tenda Technology ca., Ltd. Other brand and product names mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>