TCL Sweeva2000 Robot Vacuum Cleaner User Manual

Robot Vacuum Cleaner User Manual

 Product description

Robot Vacuum

Bottom of Robot Vacuum

Charging base

Packaging list

Safety instructions

The following precautions guide users on how to use the product safely and correctly to avoid the risk of injury or damage.
Basic precautions
After reading this manual, please keep it in an easily accessible place.

• This symbol is a warning symbol. This symbol warns you of potential hazards that may cause property damage serious injury or death.

• The warning refers to a situation that, if not avoided, may result in death or serious injury.

• Be careful of flashing indicators. It may cause slight or moderate injury if not avoided.
  AWarning

• Please read this manual carefully to learn about product use and precautions before using the product.

• This appliance can be used by children aged 8 years and above Persons with physical, mental, or sensory impairments are prohibited from using or operating this product.

• This product is not a toy. Children shat not play with the appliance. Small children and pets should be supervised when the robot is operating.

• Children are prohibited from playing with the product package, otherwise, it may cause suffocation.

• Please do not insert any body parts(such as hands or feet)under the brushes or wheels of the appliance when it is operating.

• Do not place any objects on the stationary or moving robot. Please do not sit or lean on the appliance.

• Do not clean any bumping objects.

• Do not use the appliance to pick up hard or sharp objects, such as glass sheets, iron nails, etc.

• Do not use this appliance in humid or flammable, explosive. corrosive environments, or in the exposed power sockets.

• Do not spray or place flammable materials (gasoline, thinner. etc.), surfactants (cleaners, bathroom items, etc.), or beverages around the appliance, otherwise it may cause fire or product failure.

• Do not pour water, detergent, etc. into the appliance, otherwise, it may cause product failure.

• This product is for indoor use. Do not use it outdoors or in a suspended environment without protective fences to prevent it from falling. At the same time, physical barriers should be used to prevent it from entering the balcony to ensure safe operation.

• To avoid electric shock, do not expose the robot’s electronics, batteries, or charging base. It is strictly prohibited for users to repair the robot themselves. Please hand maintenance work over to qualified maintenance personnel. Do not operate the robot with wet hands.

• Do not dean or maintain the main machine and charging base with the power on.

• Please make sure to use original adapters, batteries, and other accessories. Do not use third-party accessories.

• This product contains batteries. Please do not place the product in water or on fire. Please stop using this product if there is any battery problem: the battery needs to be recycled separately. and the used battery should be put in a sealed plastic bag and handled in accordance with local environmental laws and regulations.

• Please only use a cloth dampened with dean water to dean the appliance.

• Please note that the robot moves by itself. Take care when walking in the area the robot is cleaning to avoid stepping on it or tripping over it.

• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction.

• The appliance is only to be used with the unit provided.

• It must only be supplied at SELV.

• This appliance contains batteries that are only replaceable by skilled persons.

• For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

• This device is for indoor use only. It should be clean and maintained regularly. The appliance is only to be used with the unit provided.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision

• The battery must be removed from the appliance before it is scrapped;

• The appliance must be disconnected from the supply mains when removing the battery;

• The battery is to be disposed of safely.
  ABe careful

• Carefully protect the power cord, avoid pulling, twisting, being caught by the door, or damage and crushing caused by other heavy objects; Do not use the appliance if the cord is damaged.

• If the charging base is not used for a long time, the power plug should be unplugged from the socket.

• Please place the cleaning brush out of the reach of children.

• Empty the dustbin frequently and keep it clean. Do not use the appliance when the dustbin is full.

• Keep the mainframe and charging terminal of the charging base away from metal objects.

• This appliance is specifically designed to prevent floor scratching. however, we still recommend that you use this appliance to clean a small area of the room before cleaning the entire room to ensure that the floor is not scratched.

• Please purchase and use the original consumables.
  ****Reminder
  Before using this appliance, please check the following items:

• Remove fragile or unnecessary objects from the cleaning area, including papers, blinds, or curtain cords; remove expensive pottery, valuables, and inflammable from the floor.

• Do not use this appliance in a room where children sleep alone. otherwise, the child may be injured.

• Check whether the battery power is sufficient. Please charge it if the power is low.

• Please empty the dustbin box if it is full.

• Please close the door of the room if you do not want the robot to enter. During cleaning, the robot may enter other rooms and continue cleaning.

• In most cases, the anti-fall sensor will prevent the robot from rolling down the stairs. If the sensor is dirty or used on a carpet or on a reflective / very dark floor, the effect of the sensor will be compromised it is recommended to set up physical barriers where the robot may fall.

• Please do not use the robot on the tassels of a carpet in the folding area, so at to prevent the robot from being entangled. Avoid cleaning dark and high pile carpets or carpets thicker than 1.02/26mm, as they may cause robot failure.

Notice
This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new ones, the retailer is legally obliged to take back your old appliance for disposal at least free of charge.

FCC Statement
1. This device complies with Part 15 of the FCC Rules. operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  RF Exposure Warning Statements:
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.

 product uses

Important Tips Before Use
a, Remove power cords and small objects from the floor that may entangle Robot Vacuum.
b, Fold tasseled edges of area rugs underneath to prevent tangling Robot Vacuum. Avoid cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in / 26 mm as they may cause Robot Vacuum to malfunction.
c, Keep Robot Vacuum away from spaces lower than 2.87 in/73 mm to prevent Robot Vacuum from getting stuck. If necessary, place a physical barrier to block off the problem areas.
d, Keep Robot Vacuum away from wet areas.
e, Robot Vacuum may climb on top of objects less than 0.63 in / 16 mm in height. Remove these objects if possible.
f, Anti-drop sensors prevent Robot Vacuum from tumbling downstairs and steep drops. They may work less effectively if dirty or used on reflective/very dark-colored floors. It is recommended to place physical barriers to block off areas where Sweeva may fall.
** Place physical barriers in front of fireplaces and areas that may cause damage to Robot Vacuum if entered.
Prepare**

1. Please install side brushes before use|  2. Remove the limit stripes in Sweeva’s forward collision bumper on both sides
---|---
|

**** Before use, the user should remove the foam placed on both sides of the front bumper 1
3. Place the Charging base on a hard, level surface and against a wall

4. Remove objects within 3ft/1 m of the left and right side and within 6ft/2m of the front of the charging base.

**** Do not face the charging base towards strong light or high magnetic fields. (e.g., television, refrigerator, and other home appliances)
5. Connect the round connector of the adapter into the power socket on the charging base and the charging base and the other end into a wall outlet. When the charging base connects to AC power, the LED indicator on the charging base will turn solid blue.

** Install the Charging Base in a location that Robot Vacuum can easily access. It is recommended to place the Charging Base against a wall, and on a hard-level surface rather than on rugs or carpets. Always keep the Charging Base plugged in, otherwise, Robot Vacuum will not automatically return to it.
Charge Your Robot Vacuum
Sweeva has a pre-installed rechargeable battery that has to be fully charged before use. Sweeva returns to the Charging Base at the end of a cleaning cycle or when its battery is running low.
♦ Method 1** : Attach Sweeva to the Charging Base by aligning its charging pins with the charging pins on the base.

• Method 2:Press the charging button on the remote control to return the robot vacuum to the Charging Base.

♦Method 3:Press and hold the start button on the machine for 3 seconds to return it to the charging base.

** Turn off the main powers witch if Sweeva will not be used for a long period of time. To preserve the battery’s lifespan, recharge at least once every 6 months.
How to start operating**

1. Turn on: Turn on the rocker switch button at the bottom of the robot ( shift the gear to the” ON ” state )
2. Start Short press the ” Start button “ on the top of the robot to start the automatic cleaning mode.
3. Pause: When the robot is operating, short press the ‘start button” on top, the robot will pause and enter the standby mode.
4. Recharge: Press and hold the “Start button” for three seconds, Once the device beeps once, release the button, a robot vacuum will enter recharge mode, It will automatically find its way back to the charging base.
5. Sleep: If there is no operation within 90 seconds, the status light will turn off and the robot will enter sleep mode.

Download TCL Home APP and pair it with a robot
You need to download the TCL Home APP with your mobile phone and pair it with the robot through the WiFi at home. Control the robot with the TCL Home APR The process of downloading the APP and pairing it with the robot it as follows:
1. Download TCL Home APP
Download and install TCL Home APP (ios)
Method 1: Scan the QR code below and Install this app.
Method 2: Tap the ‘App Store” icon on your iPhone. Search “TCL Home” in the search bar.

https://www.tcl.com/content/TCLHome/v2/ScanCodeJump.html
Download and install TCL Home APP (Android)
blend l: • Scan the OR code below and Install this app.
plethora 2; Tap the “Google Play” icon on your iPhone. Search “TCL Home” in the search bar.

https://www.tcl.com/content/TCLHome/v2/ScanCodeJump.html
2. Create a TCL account (Please refer to the in-app user instructions for more details)
3. Pair the app with the robot
1. Press the rocker switch on the back of the Robot to ensure it is powered on, the start/stop button will have solid blue light;
2. Press and hold the start/stop button for 7 seconds the Robot will make two beeps.
3. Once the Wi-Fi status light starts flashing blue slowly, click’ next ” on the App;
(Notes: The detailed distribution network steps can be operated according to the steps on the app.)
4. Reset Wi-Fi
When the robot fails to be connected with the Internet, please press and hold it for 7 seconds before the Will light turns off. Then, it starts to flash slowly, accompanied by a buzzer sound. This indicates that the robot is ready for a new connection.
5. More APP functions
The TCL Home APP has scheduled cleaning, automatic cleaning, corner cleaning, fixed-point cleaning, voice control ( connected with Alexa and Google voice assistant ), and other functions, please refer to relevant instructions on the APP.

• **** Due to the continuous development and upgrade of the APP, there may be some minor adjustments on the APP page, please refer to the actual version.
• Wi-Fi wireless connection only supports networks in the 2.4GHz frequency band and does not support networks in the 5GHz frequency band.
• If the pair is unsuccessful, please check the Internet status and try to pair again.
  Virtual wall
  A virtual wall can be used to isolate areas that you do not want to be cleaned. In areas that do not need the robot to enter, a virtual wall can be created along the entrance (as shown in the figure below);
  **** Stick the virtual device firmly on the floor. Please do not paste a virtual wall near the charging base, so as not to affect recharge.

Key indicator status description

base
Orange flashes| The appliance is charging
Error Tones and Indicators| |
---|---|---
Status| Buzzer alarm| Action
Roller brush stuck| One beep, flash red light| Turn off Sweeva’s and remove any hair or debris from the roller brush.
Anti-drop
sensors are dirty| Two beeps, solid blue light| Clean the anti-drop sensors.
Side brush failure| Two beeps, flash red light| Turn off Sweeva’s and remove any hair or debris from the side brushes.
Side wheel failure| Three beeps, flash red light| Turn off Sweeva’s and remove any hair or debris from the wheel.
Forward collision
bumper stuck| Four beeps, solid blue light| After repairing the stuck forward- collision bumper press the ” start button ” to restart the robot.
Suction failure| Five beeps, flash red light| 1. Turn off Sweeva’s, then remove and empty the dust collector. 2. Make sure the suction inlet is not blocked by any hair or debris.
Low battery
warning| Seven beeps, solid orange light| Manually put the robot to the charging base for charging.

How to turn off the robot
Turn off the power button on the bottom side of the robot (turn the gear to ” OFF ” state)
How to use the remote control

| |
---|---|---
1. Use two AAA batteries for the remote control. The battery is included in the package.| 2. Before using the remote, please set the clock time to be your local time zone.| 3. Short press the Start Button to start cleaning.

Maintenance/replacing consumables

♦ 1. Cleaning of dustbin and filter net (filter net is replaceable)
**** Please power off the power before maintenance Note: Please turn off the power (bottom rocker switch)of the robot before product maintenance/replacing consumables.
The suction power may become weak if the dustbin is full. The dustbin needs to be cleaned before and after each cleaning.
1.  Press the buckle of the dustbin with your thumb, and drag the dustbin out.

(2) (When taking out the dustbin, do not turn it upside down) Hold the dustbin up and down with both hands, and open the dustbin forcefully;

(3) Hold the dustbin with your left hand, tilt it at a suitable angle, and use the cleaning tool with your right hand to pour out the dust in the dustbin;

(4) Hold this position with your thumb to the left and pull up the filter;

(5) Rinse the dustbin and filter(not frequently, monthly cleaning is recommended), wash for at least 1 minute, and shake off the water drops. Please wait until the dust bin and filter are completely dried(%-24h) before using it, to ensure their service life.

(6) Filter installation/new filter net replacement: Insert the filter net into the housing slot, and then fasten the filter downwards until it buckles into place.
(7) After closing the upper cover, push the dustbin into the main machine (make sure the dustbin is fully inserted until it buckles into the right place).

Cleaning of roller brush (roller brushes are replaceable)

Foreign substances such as hair are easy to adhere to roller brushes. Roller brushes may be damaged if there are too many foreign substances on them. It is recommended to clean them once a week.
(1) Turn the main machine over (with the bottom shell facing upwards), hold the buckle with both hands, lift it up, and take out the brush cover.
(2) Use your fingers to hold the bearing far away from the switch, take the other end of the support holder, and take out the roller brush upwards.
(3) Use cleaning tools to clean the hair and other dirt on the roller brush slot.
(4) Roller brush installation/new roller brush replacement: Insert one end of the roller brush square bearing seat into the corresponding square slot of the roller brush slot and slide into place (reverse installation does not work).
(5) Make sure the main brush is aligned properly in the robot and then fasten the roller brush cover downward.

Cleaning of side brushes (side brushes are replaceable)

Foreign substances such as hair is easy to adhere to side brushes. side brushes may be damaged if there is too much foreign substances on them. It is recommended to clean them once a week.
1. With the bottom shell of the main machine facing upwards, pull out the side brush forcefully;
2. Use a cleaning tool to clean up the dirt on the side brush and the slot, and the hair on the side brush can be cut off with a cleaning tool (dry brushing works, washing doesn’t work).
3. Reinstall the side brush/new side brush replacement: hold one corner of the side brush, and the other side against the corresponding buckle, press the side brush down into the slot.

Cleaning of sensor

Foreign substances may adhere to the sensors on the bottom and side rear of the robot. If too many foreign substances adhere to the sensor at the bottom of the robot, the robot may fall off ledges. It is recommended to clean the sensors once a week. Please gently wipe each sensor cover with a soft dry cloth, including:
(1) Wall sensors on both sides of the robot;
(2) Front infrared anti-collision sensors;
(3) 3 anti-fall sensors on the bottom side;

| |
---|---|---
1 Wall sensors on both sides of the robot;| 2 Front infrared anti-collision sensor;|  3 anti-fall sensors at the bottom

 Cleaning of charging contacts

 Foreign substances may adhere to the bottom of the machine and the charging contacts of the charging base. If too many foreign substances adhere to the contact pins at the bottom of the machine, the machine may not be able to charge normally. It is recommended to clean them once a week. The position in the figure is where the charging contacts are located. Please use a dry cloth to clean the charging pole pieces on the main machine and the charging base (please turn off the power when cleaning)

|
---|---
charging contacts on the main machine| charging contacts on the charging base

Cleaning of the Omni-direction wheel

Foreign substances may adhere to the Omni-direction wheels of the machine. If too many foreign substances adhere to the Omni-direction wheels at the bottom of the machine, it may prevent the machine from moving forward and make it unable to clean or cause low cleaning efficiency. It is recommended to clean them once a week. Remove the wheels from the front caster assembly and remove the hair or dirt in the assembly shell and those entangled on the axle; When completed, reinstall the wheels into the front caster assembly.

Maintenance and replacement frequency

months
Side brush| Once a week (twice a week for families with pets)| Every 3-6 months
Sensor| Once a month| –
Charging contact| Once a month| –
Omni-direction wheel| Once a month| –

Note: Sweeva has many different spare parts and components. Please purchase spare parts through the “TCL Home” App or by visiting TCL’s offline or online stores.

Troubleshooting

roller brush.
The side brush is not spinning| Remove hair and foreign substances on the side brush.
Unable to start the robot| Confirm whether the robot is fully charged.
Confirm whether the power button on the bottom of the robot is in the “ON” position
Weak suction| Check whether the fan suction port is blocked by foreign substances. Empty the dustbin. Clean or replace the high-efficiency filter of the dustbin.
Louder noise| Confirm whether the dustbin is installed correctly.
Confirm whether the high-efficiency filter of the dust bin is installed.
Check if there is any foreign substances stuck on the roller brush or side brushes.
Unable to start with the remote control| Replace the remote control battery (triple-A battery)
Unable to charge| Remove the objects around the charging base and make sure that the power supply is connected to the charging base Please wipe the charging contacts of the charging base with a dry cloth. Please wipe the charging contacts of the main machine with a dry cloth.
The robot stops automatically| Whether the roller brush is stuck and stops spinning, whether the side brush is stuck and stops spinning.
Whether the side wheel is stuck, which makes the robot unable to move forward Confirm whether the robot is feeding.

 Basic Parameters

Sweeva2000 main machine

|
---|---
Model| B200A
---|---
Size| 320mmX323.5mmX7Omm
Battery| Li-Ion 2900mAh
Net weight| 4.07kg
Rated voltage| 14.1V
Rated power| 30W
Power input| 19V —0.6A
Model| B200GOOAA
Input| 19V —0.6A
Output| 19V=0.6A

Sweeva2000 main adapter

Model:
GSC”X”0600S019V12E
(X=U,T,V,B,U=US,
T=JP,V=EU,B=UK).| Connector type| DC5.5
---|---|---
Rated input| 100-240V-0.5AMax, 50/60Hz
Rated output| 19V—0.6A

X=U stands for US plug,X=T stands for Japan plug,X=V stands for Europe plug,X=B stands for UK plug.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>