OUKITEL WP12 Pro Rugged Phone User Guide
- June 6, 2024
- OUKITEL
Table of Contents
WP12 Pro
Thanks for choosing OUKITEL products
Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT
TECHNOLOGY CO.,LTD
Smart Phone
Model number: WP12 Pro
Operating Temperature: -10° C to 40° C
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- Use care with the earphone may be possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
- The product shall only be connected to a USB interface of the version USB 2.0
- The adapter shall be installed near the equipment and shall be easily accessible.
- The plug is considered as disconnect device of the adapter
- The device complies with RF specifications when the device used at 0mm from your body
Overview
|
---|---
Accessories
Battery
WP12is included an internal battery.
You can track your battery status with the icon shown on the top right of the
screen. As microwave ovens, stoves, or radiators, batteries may explode when
overheated.
Warning
- Use only OUKITEL-approved batteries specifically designed for your phone. Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
Basic parameters
Display: | 5.5” HD+ I PS Touch screen |
---|---|
Operating system: | Android™ 11 |
Processor | Cortex-A53 up to 1.8 GHz *4 |
GPU: | IMG GE8300 @ 550 MHz |
RAM: | 2/3/4GB |
ROM: | 16/32/64GB |
Battery: | 4000mAh, Quick Charge |
Camera
Rear Camera
13M AF + 2 M FF YUV
LED Flash
| Front Camera
5.0MP
---|---
Connection (1/0)
Europe Band: | American Band: |
---|---|
GSM: 2/3/5/8 | GSM: 2/3/5/8 |
WCDMA: 1/8 | WCDMA: 1/2/4/5/8 |
FDD: 1/3/7/8/19/20 | FDD: 2/4/5/7/12/17/28a/28b |
FM.87.5 MHz -108 MHz
SIM Card Slot: Dual SIM,Nano+Nano/Nano+TF Card
Note: Based On Local Frequency Band
Other Features
Video: AVI, MP4, WMV, MKV, MOV, ASF, FLV
Audio: FLAG, APE, AAC, MKA, MP3, M4A, AMR, ALAC, WAV
Image: JPEG, BMP, GIF, PNG
Dimensions | Package contents |
---|
Height :174mm
| 1*Warranty card| 1Multi-language Manual
Width: 81mm| 1USB Cable|
Thickness: 14.3mm| 1Charger| 1SIM Card pin
Weight: 250g
Android is a trademark of Google LLC
Comes with the Google™ app and Google Chrome™
MANUFACTURER NAME SHENZHEN YUNANI
INTELLIGENT TECHNOLOGY CO., LTD
MANUFACTURER ADDRESS. A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK, NO.2O
DAFU INDUSTRIAL ZONE, AOB~I COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,
SHENZHEN CHINA
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific
organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the
safety of all persons regardless of age or health.
requirements, use accessories that maintain a 10mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters,
and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure
requirements and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the
user’s body and the handset, including the antenna. Third-party belt clips,
holsters, and similar accessories used by this device should not contain any
metallic components.
Body-worn accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided. Use only the supplied or an
approved
antenna.
FCC ID: 2ANMU-WP12
Documents / Resources
|
OUKITEL WP12 Pro Rugged
Phone
[pdf] User Guide
WP12 Pro, Rugged Phone, WP12 Pro Rugged Phone
---|---