SOUNDVISION CSI-06 Ceiling Speaker User Manual
- June 12, 2024
- SOUNDVISION
Table of Contents
SOUNDVISION CSI-06 Ceiling Speaker
Product Information
- Product Name: CEILING SPEAKER CSI-06
- Dimension: 190mm x 105mm x 163mm
- Rated Power: 6 Watts
- Line Voltage: 100V
- Transformer Taps: 3W, 6W, 6W/8
- Frequency Response: 110Hz~15KHz
- Sensitivity: 1W/1m
- Maximum SPL/1m: Calculated value
- Coverage (Nominal -6 dB): Not specified
- Speaker Driver: Not specified
- Nominal Impedance (Passive): Not specified
- Operating Temperature: Not specified
- Connections: Red Wiring (Signal+), Blue Wiring (COM-)
- Indoor Applications: Hotels, restaurants, bars, lounges, training and conference rooms, shopping centers
- Color: Not specified
- Cabinet Material: Not specified
- Front Grille: Not specified
- Dimensions for Mounting Hole: Not specified
- Weight: Not specified
Product Usage Instructions
- Cut a hole in the ceiling according to the dimensions provided.
- IMPORTANT: Do not use in position 8 on a 100V system to prevent damage.
- Connect the wiring as follows:
- Red Wiring: Signal (+)
- Blue Wiring: COM (-)
- Retract the 2 Snap Clamps on the speaker into their open position.
- Push the speaker up through the ceiling opening.
- When the Clamp Arms press against the ceiling, the Snap Clamps will rotate and clamp down closed to secure the speaker in position.
- Ensure that both Snap Clamps are in the snap-down position to securely hold the speaker in place.
Please read the user manual thoroughly for better installation, commissioning, and use of the product. Keep the manual for future reference and adhere to the safety tips provided.
Dimension
Installation Steps
- DO NOT USE IN POSITION 8Ω ON A 100V SYSTEM, OR DAMAGE WILL OCCUR.
- RED WIRING: SIGNAL(+) BLUE WIRING: COM(-)
Retract the 2 Snap Clamps on the speaker into their open position.
Then push the speaker up through the ceiling opening.
When Clamp Arms press against the ceiling, the Snap Clamps will rotate and clamp down closed to the ceiling surface.
When inserted correctly, both 2 SnapClamps will be in the snap down position,thus securing the speaker securely into position in the ceiling
Thanks for using our speaker products. All our products are tested strictly
before leaving the factory, with guaranteed quality.
Our speakers are widely used in such places as schools, gymnasiums, square
halls, parks, parking lots, railway stations, airports, villa communities and
mall supermarkets, etc., and they will be your ideal choice for public address
system.
For better installation, commissioning and use of the product, please read
this manual in detail before installation.
Safety Tips
- Please be sure to use the former reading detailed notes.
- Really pay attention to this manual and a safety with the important warning.
- Recommend that you keep this manual for future reference.
Common warning signs and security
The manual shown warning signs and security is to prevent the improper
operation due to personal injury arising from the loss of property, please
read before using this product must understand that this manual security
symbols and Warning to indicate fully aware of potential risks.
Warning
Such as the inappropriate use of staff will cause injury, death and property damage.
When installed loudspeakers
- Definitely will not be allowed to speakers and any exposure in the rain-wet or water, may be inconsistent with ,or fire.
- Restricted by the provisions of the speakers on the voltage, such as the us of high voltage may cause electric shock or fire disaster. Is no pruning, distorted, or replacement of damaged wires.
- Avoid instability in the installation or set up speakers, such as shaking the table or flat surface , the speaker can avoid falling caused personal injury or property damage.
- Speakers will be installed in support of the speaker or the weight of a solid shelf. Speaker swap can be avoided caused personal injury or property damage.
- Wet hands must not be admitted into or plugs, may lead to electric shocks.
- The allocation of plugs, make sure that pull plugs, rather than pull wires.
- The use of a damaged power line of machinery may cause fire or electric shock.
- Mobile speaker, you plug the prior allocated. If the speaker and plugs may be moving together will cause fire or electric shock.For plugs,identified as plugs for grip.
- Will not be allowed to speakers on the vent cover,may cause internal heating caused by the fire.
- Avoid speakers installed in the humidity or dust, direct contact with the sun from the nearelectric, or smoke or steam, may cause fire or electric shock
Description and Feature
CSI-06 6-inch ceiling speaker 6Watts is ideal for indoor applications
requiring high-quality sound. designed for a wide range of commercial line
transformers with multiple for use in 100V Taps at 100V: 3W, 6W and 8Ω/6W
Applications designed suitable, such as hotels, restaurants, bars, lounges,
training and conference rooms, or shopping centers.
- 6-inch ceiling loudspeaker for installation
- Elegant design.
- Easy to installation.
- High-quality sound.
- Frequency response 110Hz~15KHz.
- Transformer taps 100V: 3W, 6W,6W/8Ω.
Specification
Speaker type | Ceiling loudspeaker |
---|---|
Rated power | 3W, 6W |
Line voltage | 100V |
Transformer taps | 100V: 3W, 6W,6W/8Ω |
Frequency response | 110Hz ~15kHz (-3dB) |
Sensitivity 1W/1m | 90 ±3dB |
Maximum SPL/1m (calc) | 97 dB |
Coverage (Nominal -6 dB) | H160° (±5°) |
Coverage (Nominal -6 dB) | V150° (±5°) |
Speaker driver | 6-inch |
Nominal impedance (Passive) | 8Ω |
Operating temperature | -20 ºC to +55 ºC |
Connections | A length of connecting cable |
Indoor applications | Yes |
Color | White |
Cabinet material | ABS enclosure |
Front grille | Metal grille |
Dimensions hole for mounting | Φ165mm |
Dimensions | Φ190 x H 105 mm (without bracket) |
Weight | 1.47Kg |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>