Kanlux LEADIE LED LED Table Lamp Instruction Manual
- June 9, 2024
- Kanlux
Table of Contents
Kanlux LEADIE LED LED Table Lamp
SPECIFICATION
OVERVIEW
INTENDED USE
/ APPLICATION
Product designed to be used in the home and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Any activities to
be done with disconnected power supply. The product can be connected
to a supply network which meets energy quality standards as prescribed by law.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Product equipped with electrical connector.
Possibility of dimming only by means of an internal electronic system. The
product
has 3 modes of operation, each with 3 levels of brightness.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry cloths. Do
not use chemical detergents. Do not cover the product. Ensure free air access.
Product may heat up to a higher temperature. The light source becomes
heated to a high temperature. Product can only be supplied by rated voltage or
voltage within the range provided. Product must not be used in
unfavourable environment, e.g. dust, moisture,water, vibrations, etc. If the
cord isolation or casing is damaged, the product cannot be used.
Non-demountable product. Not suitable for independent repairs. ATTENTION! Do
not look directly at LED light beam.
EXPLANATIONS OF SYMBOLS USED
- P1: Rated voltage, frequency.
- P2: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
- P3: Supply voltage.
- P4: Rated durability.
- P5: Colour temperature.
- P6: Colour Rendering Index.
- P7: Class III. A product in which protection against electric shock is provided by feeding it with very low safe voltage (SELV) with no risk of creating
- higher than safe voltage.
- P8: Rated power.
- P9: Rated luminous flux.
- P10: Rated luminous flux. The specified luminous flux refers to the light source (LED module) used.
- P11: This symbol means that the product can be installed and operated in/on a surface made of materials which are normally flammable.
- P12: Protection against solid foreign objects bigger than 12mm provided. No protection.
- P13: Use only indoors.
- P14: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
- P15: The product is not compatible with lighting dimmers. Possibility of dimming only by means of an internal electronic system
- P16: The chipped globe, screen or protective shield must be replaced immediately.
- P17: Product meets the requirements of EU directives.
- P18: The product is compliant with all relevant United Kingdom regulations.
- P19: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
- P20: The product meets the requirements of technical regulations applicable in Ukraine.
- P21: This product is equipped with a light source with energy efficiency class D.
- P22: The LED light source can only be replaced by qualified personnel (Kanlux service only).
- P23: The control panel or control equipment can be replaced by the end user.
- ENVIRONMENTAL PROTECTION
- Keep your environment clean. Segregation of post-packaging waste is recommended.
- P24: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require
a special form of recycling / neutralising. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also
be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU
area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is
recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
For more
information about Kanlux products visit www.kanlux.com
Kanlux SA shall not be responsible for any damage resulting from the failure
to follow these instructions. Kanlux SA reserves the right to make changes in
the manual – the current version can be downloaded at
www.kanlux.com.