BraunAbility 427360 Remote Control User Guide
- June 6, 2024
- BraunAbility
Table of Contents
BraunAbility 427360 Remote Control
How to install the BraunAbility remote receiver
- Choose placement, either on or near the pump module. Ensure that the Teach-in button on the receiver is easy to access. Mount the receiver in step 3.
- Connect the supplied adapter cable between Carodoor and the receiver.
- Mount the receiver according to the illustration using the supplied adhesive pads. In some cases it might be necessary to drill (5 mm) and use the supplied clips.
| Be careful. Check for obstructions to ensure free space before drilfing.
---|---
4. Use the supplied cable tie to tidy up the excess cable.
How to set up the BraunAbility Remote app
- Download the BraunAbility Remote app from Google Play or App Store.
- Activate Bluetooth on your smartphone.
- Run the lift to a position where the Teach-in button (A) on the receiver is accessible.
- Press the teach-in button x3 and follow the setup wizard in the app.
Before using this device, download and read the user manual available at:www.braunability.eu
BraunAbility Europe AB
Åkerivägen 7 443 61 Stenkullen Sweden
Phone: +46 302 254 00
E-mail:info@braunability.eu
Swedenwww.braunability.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>