ENCELIUM LMS113 Wiring Test Tool User Guide
- June 6, 2024
- ENCELIUM
Table of Contents
ENCELIUM LMS113 Wiring Test Tool
PRODUCT SAFETY
Read These Instructions
Before Using This Product
When using electrical equipment, basic safety precautions should always be
followed, including the following:
- WARNING: Keep away from children. Do not disassemble and do not dispose in fire.
- Dispose of the product at the end of its life cycle in accordance with local regulations.
- WARNING: Properly dispose used batteries.
- WARNING: Risk of fire, explosion, or burns. Do not recharge, crush, disassemble, heat above 212°F (100°C), incinerate.
SAVE THESE INSTRUCTIONS.
GETTING STARTED
Overview
The wiring test tool is a key-fob-sized device designed for installers and
contractors to test the wiring of Encelium wireless devices. It helps lighting
manufacturers validate installing integrated load controllers like the CLM and
SensiLUM at the end of a manufacturing line before shipping to the site. In
addition,
it helps electrical contractors to test devices like WCM, WALC, WPLCM, and
WSLC at a site.
Available Model
- 56306 (Item Number), EN-ST-ZB (Ordering Code)
Using the Wiring Test Tool
The wiring test tool has two modes depending on the type of installation at
the site. First, for commercial applications like offices, schools,
healthcare, press the button labeled “NORMAL” to trigger the test sequence for
all luminaires in the vicinity to follow a pre-programmed OFF/ON/DIM Down/Up
sequence.
For applications with a high ceiling height like warehouses, press the button
labeled “HIGH” to trigger the test sequence. The primary difference between
the two modes is the signal strength emitted by the test tool.
Notes:
- Frequent use of HIGH button may lead to shorter battery life.
- Luminaires that have successfully joined the wireless network upon commissioning will not respond to Wiring Test Tool button presses.
Copyright © 2021 Digital Lumens, Incorporated. All rights reserved. Digital
Lumens, the Digital Lumens logo, We Generate Facility Wellness, SiteWorx,
LightRules, Lightelligence, Encelium, the Encelium logo, Polaris, GreenBus and
any other trademark, service mark, or tradename (collectively “the Marks”) are
either trademarks or registered trademarks of Digital Lumens, Inc. in the
United States and/or other countries, or remain the property of their
respective owners that have granted Digital Lumens, Inc. the right and license
to use such Marks and/or are used herein as nominative fair use. Due to
continuous improvements and innovations, specifications may change without
notice.
LMS113 Rev 3 06-21
Documents / Resources
|
ENCELIUM LMS113 Wiring Test
Tool
[pdf] User Guide
LMS113, Wiring Test Tool, LMS113 Wiring Test Tool
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>