Baseus W519 Swan Magnetic Bracket Wireless Charger Instructions
- June 6, 2024
- Baseus
Table of Contents
Baseus Swan Magnetic Desktop Bracket Wireless Charger
Instruction
Please Read This User Manual Completely And Keep It Properly
Product Introduction: Thanks for your choosing our wireless charger, Before you use this product, please read this manual carefully and save it.
Product parameters
Name: Baseus Swan Magnetic Desktop Bracket Wireless Charger
Model: BS-W519
Material: PC+Stainless iron
Color: Black/White
Interface: Type-C input
Input Current: DC SV 2A, 9V 2A, 12V 2A Max. (It is recommended to use the
QC/PD adapter with the power of 18W or above.)
Output Power: 15W Max.
Compatibility: This charger only supports iP 12 series with a magnetic
wireless charging function. (Only compatible with standard iP12 series cases
and Baseus magnetic cases. Third-party magnet accessories may not be
compatible with the charger.)
Product Size: 92.0mm92.0mm134.7mm (Without packaging)
Product Weight: 206g (Without Packaging)
Note: The above parameters are derived from the actual measurement of the
product. The actual parameters will vary with the product or other factors.
Packing list
Wireless Chargers 1
Type-C data cable 1m 1
User Manual 1
Warranty card 1
User instruction
- Plug the USB port into the adapter port, and put your phone on the emission area, make sure the receiving area of the mobile is magnetic suction with the emission area of the wireless charger. (normally the receiving area is in the middle of the mobile)
- Remove your phone once charging is completed.
Indicator
- Connect the wireless charger to the USB port, The white, indicator will be light on;
- The indicator light is breath at charging mode;
- If the indicator light flashes very fast, please check if you placed the Wireless Charger and the mobile properly, and please make sure there is no metal placed between the Charger and the mobile.
Safety Instructions
If your mobile is running an APP with high power consumption or is running the APP for a long time, while charging wirelessly, the mobile may heat up. It is a normal situation, will not influence the life or performance of the mobile and the Wireless Charger.
- This charger only supports iP 12 series with magnetic wireless charging function;
- This chargeronly compatible with standard iP12 series cases and Baseus magnetic cases. Third-party magnet accessories may not be compatible with the charger;
- It is recommended to use PD certified adapters, or other PD adapters that meet international safety standards(5Vm 2A,9Vm 2A,12V 2A);
- The applicable operation temperature range is from 0°C to 35°C. And the storage temperature range is from -20°C to 50°C. Using the wireless Charger out of the suggested temperature range may damage the product or shorten battery life;
- Avoid children and pets chewing, swallowing the Wireless charger;
- Do not disassemble, modify or repair the Wireless Charier by yourself;
- Do not place the magnetic stripe card (e.g. credit card, phone card, bank passbook and record card) near the Wireless Charger while charging, to avoid the magnetic field generated by the Wireless Charger damaging the magnetic stripe card.
Statement on Toxic and Hazardous Substances in Electronic Information
Products
| Part Description | Toxic or hazardous substances and elements 5 |
|---|
Lead
(Pb)| Mercury ( Hg)| Cadmium| Hexavalent
chromium (Cr MID| Polybrominated
biphenyls (PBB )| Polybrominated
diphenyl ethers
(PBDE)
( Cd)
PCB| X| 0| 0| 0| 0| 0
Casing| 0| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0
This form is compiled in accordance with SJ/T 11364.
0:It indicates that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in Glit/T 26572 standard.
This product complies with EU Roll S 2.0 Directive(2011/65/EU)
Warm Tip: The 10-year icon refers to the “effective life of environmental
protection”, not the product quality assurance period. Electronic products all
contain toxic and harmful substances such as lead, mercury, and cadmium. Once
they are overused, toxic and harmful substances may leak or mutate, cause
pollution to the environment, or cause serious damage to people and property.
The term of “environmental protection use” means that all electronic products
will be required to use within this effective period. We will no longer be
responsible for the quality of the products due to the safety risks that arise
after the safe use period.
Copyright ©2010-2020 Shenzhen Times Innovation Technology Co., Ltd.
All Rights Reserved
Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive
Standard: Q/SSCZ 021-2020
Hotline: +86-4000-712-711 Website: www.baseus.com
http://weixin.qq.com/r/JnXp8RfE6kqVrVOS9yA0
PB2822Z
Designed by Baseus
Made in China
Warnings
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuming the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>