tekkiwear K3 LCD Projector User Manual

tekkiwear K3 LCD Projector User Manual

Please read this manual throughly before use this product and keep it for future referenc

PACKING LIST

NOTICE
Recommended

1. Ideal for turning your living room into a movie theater, sharing fun videos at family gatherings and supporting your presentations at work with visual media projections.
2. Close the curtains and turn off the lights to enhance the visibility of the projected image.
3. Disconnect the device from power when not in use.
4. Disconnect immediately in case of spillage of any liquid near the projector to avoid short circuits.

Not recommended

1. Never place cloths or any cover over the projector, this prevents proper ventilation of the heat from the equipment and may cause damage.
2. Do not look into the lens of the projector when it is turned on, it can cause damage to the eyes due to the intensity of the light emitted by the projector.
3. Avoid sweeping or dusty activities near the equipment.
4. It can only be opened and repaired by authorized personnel.
5. Avoid having liquids near the projector, spills can cause irreparable damage.

FUNCTION OVERVIEW

1. Menu,

2. Power,

3. Return,

4. OK,

5. Power input,

6. Audio OUT,

7. USB 1,

8. USB 2,

9. IR receiver

10. Mute,

11. Power ON/OFF,

12. Volume DOWN,

13. OK button,

14. Menu,

15. Focus +,

16. Home,

17. Volume UP,

18. Direction key,

19. Back, 1

20. Focus -,

21. Input

QUICK START

1. Plug the power cord into a outlet
2. Press the power button to turn on the projector
3. Select the correct input source to project your device
4. Focus the ring to get the best image performance
5. Press the power button to turn off the projector

INPUT SOURCE

Press on projector or remote control to enter the interface of input source A. USB connection

PROJECTOR CONECTION

PROJECTION DISTANCE & SIZE

SPECIFICATIONS

Display technology: LCD
Power suply: AC 100-240V 50-60Hz
Projection distance: 3.8 FT – 18 FT (1.16M – 5.5M)
Installation type: Front / Rear / Ceiling
Focus: Manual
Speaker: 3w / 4Ohm
Photo format supported: BMP / JPG / PNG / GIF / JPEG
Light source: LED
Unid dimentions: 6.45 x 6.3 x 6.77 inchs
Unit net weight: 2.2 Lb (1Kg)
Resolution supported: 576i, 576p, 720i, 720p, 1080i, 1080p
Projection screen: 37” – 170”
Aspect radio: 4:3 / 16:9 / Auto
Audio format supported: MP3 / PCM / FLAC / WMA
Video format supported: AVI / MP4 / MOV / MPEG1 / MPEG2 / H.264 / XVID

TROUBLESHOOTING GUIDE

1. Blurry Image

• Adjust electronic focus/keystone.
• Projector and screen/wall must be in effective distance. 2. Remote unresponsive
• Make sure remote points at IR receiver directly.
• Do not cover IR receiver. 3. Up Side Down Images Enter “Menu” on projector or remote to flip the projection image.

Projection mode/Bluetooth speaker

Indicator status is as below at the power button:
Standby mode: red light
Working mode: blue light
Speak mode: blue light
After short pressing the power button, the projector is on
Enter speaker mode: In the working state, short press the power button to switch to speaker mode. After entering the speaker mode for 20 seconds, it will automatically enter the Bluetooth standby state
Exit speaker mode: In the speaker mode, short press the power button or any key on the remote control to exit speaker mode, and enter projection mode

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>