TQ-Group KTX2-S 160mm Stack Format Transponder Instructions
- June 13, 2024
- TQ-Group
Table of Contents
TQ-Group KTX2-S 160mm Stack Format Transponder
Product Information
- Product Name: KTX2-S
- Model Number: 304110
- Date of User and Installation Manual: 12.09.2023
- Technical Content Approval: EASA ETSO Authorisation number EASA.21O.10069784 and P/N 304110
- Revision: .0101
- Manufacturer: TQ Aviation
- Manufacturer’s Design Organisation: TQ AP to DOA
- Head of Design Organisation: Thomas M. Eilers
- Contact for Support: [email protected], Tel.: +49 (0)8153-9308-661
Product Usage Instructions
-
Ensure compliance with prevailing aviation legislation
regulations. Check the revision number of the User and Installation Manual (KTX2.A-MAN.0204) to determine its status. -
Refer to the TQ-Avionics website (www.TQ-Avionics.com) for updates and current revisions of the manual.
-
Download updates and current revisions of the manual for free from the website.
-
Follow the instructions in the User and Installation Manual (KTX2.A-MAN.0204) for correct setting of the aircraft address.
-
If you have any inquiries or need support, contact TQ Aviation’s support team via email at [email protected] or by phone at Tel.: +49 (0)8153-9308-661.
TQ Aviation EASA.AP445
DF34 Service Information (SI)
Title: KTX2-S New User and Installation Manual
Date: 12.09.2023
PLANNING INFORMATION
To obtain satisfactory results, procedures specified in this publication must be accomplished with ac-cepted methods in accordance with prevailing avia-tion legislation regulations.
Applicability
KTX2.A-MAN.0204
- Part number(s): 304110
- Serial number(s): all
Concurrent ASB, SB
Not applicable.
Reason
Correct setting of aircraft address
Subject
The European monitoring reported that some air-craft equipped with KTX2-S
were reporting incorrect ICAO 24-bit address – ‘aircraft address’. EASA has
investigated the causes that could led to this anomaly and one cause could be
the possible mis-understanding of the operator setting the aircraft address
while following the instructions of manual KTX2.A-MAN.0203
Compliance
In this context, the instructions in the user manual have been revised and
the setting of the aircraft address has been changed or improved accord-ingly.
The current user manual is available as ver-sion KTX2.A-MAN.0204 (see §
References). It is safety relevant that these instructions are followed.
Approval
The technical content of this document has been produced in accordance with
Alternative Procedures to DOA ref. EASA.AP445. The technical content of this
document refer to EASA ETSO Authorisation number EASA.21O.10069784 and P/N
304110.
TQ AP to DOA
Head of Design Organisation
Name
Thomas M. Eilers
Signature
Labor time
Not applicable.
Software modifications
Not applicable.
References
User and Installation Manual KTX2.A-MAN.0204 NOTE: The status of the manual
can be determined by checking the revision in the header of the document.
Compare this number to that listed on the TQ-Avionics website: www.TQ-
Avionics.com Updates and current revisions can be
downloaded for free.
Other publications affected
Not applicable.
MATERIAL INFORMATION
Material cost and -availability
Not applicable.
ACCOMPLISHMENT INSTRUCTIONS
Instructions
Not applicable.
Summary
Compliance with the instructions in the current User and Installation Manual
KTX2.A-MAN.0204 is safety-relevant and must be followed.
Enquiries
For enquiries regarding this Service information please contact our support:
- Via E-Mail: [email protected]
- By phone:
- Tel.: +49 (0)8153-9308-661
- Fax : +49 (0)8153-9308-7661