mirabella I002940 Genio Rechargeable LED Portable Lamp Instructions
- June 6, 2024
- Mirabella
Table of Contents
mirabella I002940 Genio Rechargeable LED Portable Lamp
Install the Genio App and
register Account
For the best experience, download the “Mirabella Genio” app to your smartphone from the App Store or Google Play, or you can also scan the QR code below, the app icon will be displayed after installed successfully
Charging the Light.
Before using this product for the first time, please fully charge it using the
supplied USB cable.
It takes approx. 2 hours to fully charge the Battery.
While charging the red light will be displayed, once fully charged, a
Greenlight will appear. The run time of the light is approx. 10hrs.
Pairing using Mirabella Genio App
- Press the on/off switch and wait for the portable lamp starts to blink (approx. 2 blinks per second)
- Ensure your mobile phone is connected to a 2.4GHz Wi-Fi network. (5GHz is not supported and it should be disabled on the router setting during pairing, once the unit has been paired, 5GHz can then be re-enabled).
- Launch Mirabella Genio app, tap on plus symbol “+” (located top right-hand corner)
- Go to Smart Lighting -> Genio lighting devices
- Follow the App instruction to finish the pairing process
If the lamp doesn’t blink rapidly when first power on, please try power off then power on /off 3 times and wait for it to start blink or try power on and hold the Mode button
Trouble Shooting
If after the 100% countdown you receive a “time out” or “device not found error” this is an indication that the app failed to communicate with the cloud services.
Please ensure
- The light is blinking rapidly (2 blinks per second)
- Disable the 5GHz Wi-Fi signal on the router setting. For instructions on how to disable your 5 GHz Wi-Fi network – Please contact your internet /router provider I am using Telstra NBN, I disabled the 5Ghz and I still cannot get it to pair? Please follow the paring instructions on https://mirabellagenio.net.au/faqs
If you have done all the above, ensuring that the 5Ghz is disabled, but still failed to connect, then your modem could not be incompatible with a smart device.All trademarks are used for reference purposes only. Made in China
MIRABELLA INTERNATIONAL PTY LTD
1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043
TOLL-FREE: 1800 636 528,
www.mirabellagenio.com.au