Mirabella Genio Snap 8TL I005502 3MP Battery Wi-Fi Outdoor Camera User Guide
- June 1, 2024
- Mirabella genio
Table of Contents
Quick Start Guide
I005502 3MP Battery
Wi-Fi Outdoor Camera
Snap 8TL I005502 3MP Battery Wi-Fi Outdoor Camera
Model: Snap 8TL
v.2.0.0 26/10/2023
Welcome, Thank you for choosing our smart camera, getting started is easy
What’s included
Product Details
Note:
battery can be recharged with the supplied USB cable and a standard 5V 1A USB
adaptor (not included)
Connection Preparation
It is important that your phone is connected to the 2.4Ghz Wi-Fi and not to
the 5GHz network.
To verify your mobile device is set to a 2.4Ghz Wi-Fi network, navigate to the
Settings menu and click on Wi-Fi. In this menu you will see all the detectable
networks in your area. Locate the SSID (the name of your network) and ensure
that the Wi-Fi SSID does not end with a 5G / 5GHz. Check that you have a
strong Wi-Fi signal (at least two bars) in the location where the smart camera
is to be installed.
If you don’t have at least two bars signal on your phone, then you may need to
reconsider relocating the camera to a different location or obtain a Wi-Fi
extender to boost the Wi-Fi signal strength.
Install the APP and register Account
For the best experience, download the “Mirabella Genio” APP to your smartphone from the App Store or Google Play.
-
Insert the Micro SD card
(Please note that the camera will work without an SD card, but it will not be able to record any footage.)
Remove the rubber cap to expose the SD card slot, insert the Micro SD card gently into the SD card slot. Please pay attention to the direction of the Micro SD card. Do not force it inside, once inserted, refit the rubber cap.
Micro SD card size needs >8GB, Support up to Max of 128Gb, FAT32 format only, The camera doesn’t support NTFS file system.
-
Camera Installation 1. Fix the bracket on the wall.
2. Install the camera onto the bracket and lock it by turning the locking screw -
Pairing the camera using Mirabella Genio App
1. Press the power button and wait for the indicator light to start blinking RED, (1 blink every seconds) if it fails to blink, remove the rubber cap, to expose the reset button, press the power button , then Press and hold the reset button until you hear the
“bugu” sound, camera is now ready to pair
2. Check your mobile phone is connected to 2.4Ghz Wi-Fi network , Wi-Fi name should not end with -5G
3. Open the Mirabella Genio APP, tap on +, then choose Security & Sensor and select your camera from the list 4. Double check and ensure that the LED indicator light is still blinking, tap confirm blinking and enter your 2.4GHz Wi-Fi name and password (not your genio password) 5. Tap continue and the QR code will appear on phone screen, place this QR code in front of the camera at approximate 15-20cm, until your hear a sound, the indicator light will now change from red to blue. Please wait for indicator light became solid blue, then tap the beeped/indicator switch button
6. Camera is now successfully added
into your APP. Please refer to the FAQ section for troubleshooting if this
method does not connect.
Q. LED indicator is not blinking red as per APP screen.
A. press the power button on the side, then depress the reset hole until you hear the reset sound, then, wait for another 30-40 sec until the light starts to blink red (1 blink per second).
Q. Camera doesn’t scan the QR code
A. Please ensure camera is in the pairing mode, indicator light is blinking red as per APP screen, if you are unsure, please simply reset it
Q. After scanning the QR code, indicator light doesn’t turn into solid blue
A. This is an indication of communication error with router, if you are using IOS 14, please ensure local network setting permission is turned on for Genio APP
Q. I am using Telstra NBN, I disabled the 5Ghz and I still cannot get it to pair?
A. Please follow the Guest Network paring instructions at https://mirabellagenio.net.au/faqs
Camera usage Tips (user interface may change with APP updates) Tap on the …
icon you can access the camera’s Settings page 
Device Name:
You can customize the camera name here
Share Device, If you wish to share or remove this camera with other genio APP
user
Basic Function Settings: Please ensure Talk Mode is set as Two Way Talk,
IR Night Vision: please set it as Auto
Detection Alarm Settings: turn on/off motion detection alarm, motion tracking,
sound detection, and alarm timer setting schedule
Memory Card Settings: This will only appear when 8GB-128GB Micro SD card is
inserted
Firmware information: When new firmware is released for this camera you will
see this notification icon.
Remove Device: Remove the device from current account so you can re-pair it
again or pair under different account
Remember the performance of Wi-Fi camera is relies heavily on the performance of your router, If you are using Telstra NBN or a dual-band router, you must disable the 5GHz Wi-Fi in order to make a successful connection and for best overall performance.
FAQ:
How to connect camera to another router?
Go the camera’ settings page, look for “remove device” Remove it and reset the camera and pair it again through the app.
Poor performance, take long time to load the live footage?
Please check the Wi-Fi signal, if it is less than 60%, you will need consider changing the camera location or purchase a Wi-Fi extender to boost the signal.
Camera went offline and doesn’t reconnect back online by itself?
Go the camera’ settings page, look for “remove device” Remove it and reset the camera and pair it again through the app.
Followed the pairing process but still receive the error Cannot find Device?
• Manually disable the 5Ghz Wi-Fi signal on the router setting • Ensure that the 2.4Ghz Wi-Fi signal is on. • Ensure the indicator light is blinking RED at 1 blink per second • Please check you have entered the correct 2.4Ghz Wi-Fi SSID and password
I am using Telstra NBN, I disabled the 5Ghz and I still cannot get it to pair?
Please follow the Guest Network paring instructions on https://mirabellagenio.net.au/faqs If you have done all of the above, ensuring that the 5Ghz is disabled and the light changed from blinking red to blinking blue, but failed to become a solid blue, then your modem could be incompatible with smart device.
How to turn on or turn off movement notification?
1. On the Genio APP home screen, Tap on Me -> Settings -> Push Notification -> turn on/off Enable notifications 2. On the iphone, Settings -> Notifications -> turn on/off Allow Notification
For multiple camera setup, change camera view or arrange device set up sequences and manage rooms?
On the genio APP home screen, tap on … on the top right corner, to access these options ,tap on V to switch below rooms
Need more help or need further technical assistant from Mirabella engineer?
On the genio APP home screen, tap on, Me, -> FAQ & Feedback -> Report issue Fill the fault information or suggest for the APP/product, then submit
WARNING: Li-ion battery handling notice
Always read the instruction manual and any warnings on the device before using
a lithium-ion battery.
Rechargeable lithium-ion batteries can explode, release flames, and/or cause
burns if disassembled, punctured, cut, crushed, short-circuited, incinerated,
recharged incorrectly, or exposed to water, fire, or high temperatures.
- Use the battery charger and AC adapter specified for use with the lithium-ion battery.
- Do not force the lithium ion battery into a battery charger or device if it does not fit.
- Do not throw lithium-ion batteries into a fire or heat source also lead to overheating, explosion or fire.
- Do not connect the positive and negative terminals of the lithium-ion battery with a metal object.
- Do not throw lithium-ion batteries, drop them from high places, or otherwise subject them to strong impacts
- Do not put a lithium-ion battery in a microwave oven, pressure container, or other such devices.
- Do not place combustible materials on top of or over a lithium-ion battery when charging or discharging.
- Do not disassemble or modify a lithium-ion battery.
- When the electric device is not being used for an extended period of time, remove the lithium-ion batteries from the device and store them in a dry place.
- Keep devices that contain batteries and batteries themselves out of reach of children. Mishandling of lithium-ion batteries is dangerous.
- Lithium-ion batteries have finite life spans. If the batteries require constant recharging, replace them with new ones.
- If battery leaks or gives off an unusual odour, immediately remove it and place it away from any naked flame.
- Never dispose of a lithium-ion battery in your regular trash or recycling bin, contact your local council for recycling options
All trademarks are used for reference purposes
only.
Made in China
MIRABELLA INTERNATIONAL PTY LTD
1 MIRABELLA DRIVE, TULLMARINE,
VIC, AUSTRALIA 3043
TOLL FREE: 1800 636 528,
www.mirabellagenio.com.au