Avenview SPLIT-DPDL-4A 1×4 DisplayPort Splitter User Manual

Avenview SPLIT-DPDL-4A 1×4 DisplayPort Splitter

Product Information: 1X4 DisplayPort Splitter with PCM 7.1 and 2560×1600 support

The SPLIT-DPDL-4A is a 4 port DisplayPort splitter designed for AV connectivity, distribution, and beyond. It supports video signals up to 2560×1600 and audio signals of PCM 7.1. The product is suitable for use in various market sectors, including corporate, house of worship, military, residential, education, industrial, medical, and aviation.

The package contents include the SPLIT-DPDL-4A unit, a power adapter of 5V/3A, and two user manuals. The product has been tested for compliance with safety regulations and requirements and certified for international use. However, it should be used with care to minimize the risk of damage to the unit.

Product Usage Instructions

Getting Started

Before starting to use the device, read all instructions carefully and save the manual for future reference. Do not dismantle the housing or modify the module. If you need servicing, refer it to qualified service personnel. Keep the module away from liquids to avoid fire, electrical shock, or equipment damage. Have the module checked by a qualified service engineer before using it again.

Safety Instructions

While using the SPLIT-DPDL-4A, follow the safety instructions to protect yourself from possible injury and damage to the unit. Do not dismantle the housing or modify the module as doing so may result in electrical shock or burn. Always refer servicing to qualified service personnel. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Regulatory Notices

The equipment has been tested and found to comply with Part 15 of the FCC rules. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

Warning symbols are provided to ensure the safe use of the product. Use only the provided power cable or power adapter supplied. Do not tamper with the electrical parts as it may result in electrical shock or burn. Do not tamper with the unit as doing so will void the warranty and continued use of the product. The video boards are very sensitive to static, so ensure that if rack-mounted or installed on a surface, it should be in a grounded environment.

Cable Specification

For best results, it is recommended to use a high-quality 26 or 24 AWG DisplayPort cable with the SPLIT-DPDL-4A to maintain signal integrity and distances.

Product Application & Market Sectors

GETTING STARTED

IMPORTANT SAFEGUARDS

Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover

•• Any product, on which the serial number has been defaced, modified or removed.
•• Damage, deterioration or malfunction resulting from:
•• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•• Repair or attempted repair by anyone not authorized by us.
•• Any damage of the product due to shipment.
•• Removal or installation of the product.
•• External causes to the product, such as electric power fluctuation or failure.
•• Use of supplies or parts not meeting our specifications.
•• Normal wear and tear.
•• Any other causes which does not relate to a product defect.
•• Removal, installation, and set-up service charges.

SAFETY INSTRUCTIONS
The SPLIT-DPDL-4A 4 Port DisplayPort Splitter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SPLIT-DPDL-4A should be used with care.
Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! Keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

Warning symbols

• ONLY USE THE PROVIDED POWER CABLE OR POWER
  ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
  ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
  SHOCK OR BURN.

• DO NOT TAMPER WITH THE UNIT. DOING SO WILL
  VOID THE WARRANTY AND CONTINUED USE OF THE
  PRODUCT

• THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
  PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
  SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.

• AWARNING
  Read & understand user guide before using this device.
  Failure to follow the proper installation instructions could result in damage to the product and preventing expected results.

INTRODUCTION

The Avenview SPLIT-DPDL-4A 4 port splitter has the ability to duplicate a single DP (DisplayPort) source to any four DP
screen /display. This unit also has two useful features – supports resolutions up to 2560×1600 and extends PCM 7.1 audio to the
supported DP screens/displays attached.
Video Signals – up to 2560×1600
Audio Signals – PCM 7.1
The SPLIT-DPDL-4A includes one unit: 4 Port Splitter with one (1) DisplayPort Input that can and four (4) DisplayPort Outputs.

Features

•• Support DisplayPort specification
•• Deep Color video up to 12-bit, resolution support up to 2560×1600
•• Supports audio up to PCM 7.1CH (32-192kHz Fs sample rate)
•• Supports pixel component format with RGB; YCbCr 422; YCbCr 444
•• Color space conversion between RGB and YCbCr color space
•• Supports 1.62/2.7 Gbps data rate (Low/High bit rate)
•• Supports flexible 1/2/4 lanes configurations;
•• Full 10.8Gbps data rate support (4lanes at 2.7Gbps)
•• Supports EDID switch and setting

PACKAGE CONTENTS

Before you start the installation of the HDMI Extender, please check the package contents.

BEFORE INSTALLATION

•• Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components
within the casing.
•• Do not place the product in temperatures under 0˚C or over 50˚C. High humidity may also cause the unit to malfunction.
•• Use the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this
may result in malfunction of the unit and may cause fire.
•• Do not twist or pull by force the ends of the Displayport cable. It can cause malfunction

CABLE SPECIFICATION

We highly recommend achieving best results with our SPLIT-DPDL-4A you acquire a high quality 26 or 24 AWG HDMI cable
with the below specifications to maintain signal integrity and distances.

UltraAV DisplayPort to DisplayPort Version 1.1a Cable
The DisplayPort cable is fully compliant to DPCP (DisplayPort Content Protection) ensuring full compatibility and successful
transmission of all audio and video content. The cable supports PC resolutions of up to 2560×1600 and all HDTV resolutions
including 1080p. It also supports uncompressed audio and extended color depths of up to 12-bits per component ensuring
flexibility to meet most display application needs.
Please note, features are subject to the capabilities of the computer and graphics solution

DisplayPort to DisplayPort Version 1.1a Cabl

•• Connect a DisplayPort Enabled Computer to a DisplayPort Monitor, TV or Projector
•• Transfers Both Uncompressed Audio and High-Definition Video Signals
•• 2.7 Gbps data rate x 4 lanes – Effective total throughput 8.64 Gbps
•• Supports HDTV Resolutions up to 1080p and 2560×1600 for Computers
•• DisplayPort Version 1.1a compliant – VESA Authorized Test Center (ATC) certified
•• Locking DisplayPort Connectors Keep the Cable Securely Connect

APPLICATION DIAGRAM

PANEL DESCRIPTION

INPUT PANEL (SPLIT-DPDL-4A) Back Panel

INPUT PANEL (SPLIT-DPDL-4A) Front Panel

INSTALLATION

(SPLIT-DPDL-4A)

To setup Avenview SPLIT-DPDL-4A please follow these steps for connecting to a device:

1. Power off sources such as using DP graphic card, Laptop Mac etc.
2. Connect DisplayPort video Source to the INPUT- upto 2560×1600
3. Connect DisplayPort cable to DisplayPort Displays
4. Plug in 5V DC power cord to power jack of SC-HDM-HD42K
5. Power on DisplayPort Source and DisplayPort Display
6. When the Input is connected and turned on the corresponding LED will light on the output port

GENERAL TROUBLESHOOTING

CHANGE TX

| •      Check if connection to the source and the display are correct.

•      Ensure that display device supports DP and upto 2560×1600

•      Please use the supplied power supply-DC 5V 3A

•      Check LED light on Front Panel see (Section 3 Panel Description)

•      Check EDID Switch position see (Section 3 Panel Description)

SPECIFICATIONS

SEE ALSO Section 3

DISPLAY PORTCABLE| WQXGA: (2560X1600) ~ IN 5m(16ft) OUT 10m(33ft)
AUDIO SUPPORT| PCM 7.1(32-192kHz Fs sample rate)
ESD PROTECTION| Human body model — ±8kV (air-gap discharge)

±4kV (contact discharge)

INPUT| 1 x DisplayPort Type A (20 pin female)
OUTPUT| 2 x DisplayPort Type A (20 pin female)
LED| Front Panel Indicators
DIMENSIONS (L X W X H)| 10.6” x 5” x 1.14”

270(W) x 124.5(D) x 29(H)

WEIGHT| 1.5 lbs

680g

POWER SUPPLY| 5V / 3A DC

(US/EU standards, CE/FCC/UL certified)

POWER CONSUMPTION| 7 Watt (max)
OPERATING TEMPERATURE| 32˚ ~ 104˚F (0˚ to 40˚C)
---|---
STORAGE TEMPERATURE| -4˚ ~ 140˚F (-20˚ ~ 60˚C)
RELATIVE HUMIDITY| 20~90% RH (non-condensing)

TECHNICAL SUPPORT

Phone: | (866) 508 0269
Email: [email protected]
USA Head Office Avenview Corp. 275 Woodward Avenue Kenmore, NY 14217

USA Head Office Avenview Corp. 275 Woodward Avenue Kenmore, NY 14217
Phone : 1.716.218.4100
Fax: 1.866.387.8764
Email: [email protected]

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein. Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.

References

• home - Avenview

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>