Mirabella genio Wi-Fi Smart Christmas Light Tree Instruction Manual

: June 3, 2024
: Mirabella genio

Table of Contents

SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Mirabella genio Wi-Fi Smart Christmas Light Tree Instruction Manual

WARNING:
LIGHTING CHAIN FOR INDOOR OR OUTDOOR USE (Bulbs are non replaceable)
ADAPTOR MUST REMAIN INDOORS ONLY – IT CANNOT BE EXPOSED TO THE WEATHER
LED BULBS ARE NON REPLACEABLE
TO ENSURE THE SAFE AND SATISFACTORY OPERATION OF THIS SET PLEASE READ THESE INSTRUCTIONS CAREFULLY AND

RETAIN FOR FUTURE REFERENCE

We recommend that the set be tested prior to being set up in the desired location

SAFETY INFORMATION

Remove set from the packaging before connecting to a power supply.
Before using or re-using the set, inspect carefully
Use only with Adaptor/Transformer supplied
Do not connect set electrically to another set
Ensure that all of the cable is completely uncoiled whilst set is in use.

Failure to do so may cause over-heating and subsequent malfunction

Avoid damage to wire insulation (cable), as this could cause a short circuit and damage the transformer
Take care that the cable does not get trapped or damaged if it passes through a door or window, this is particularly important if the door, or window is metal.
Do not use any set which has: – cut, damaged, or frayed wire insulation, cracks in lamp-holders, loose connections or exposed wires

Genio Christmas Lights Wi-Fi adaptor pairing information
Regardless it is fairy light , icicle light, festoon light, LED tree, Sparking Ball, if they are using Wi-Fi enabled adaptor, the pairing process is identical.

Install the APP and register Account
For the best experience, download the “Mirabella Genio” APP to your smartphone from App Store or Google Play, the APP icon will be displayed after it’s installed successfully, open the APP and register an account.

Bluetooth pairing assistant function on the selected model only
Our latest genio smart Wi-Fi lighting range has Bluetooth pairing assistant function, to make the pairing even easier than before, to take advantage of this function, please turn the Bluetooth on your phone,

Connect the light chain to the Wi-Fi adaptor, fully uncoil the light chain
Plug the Wi-Fi adaptor to the powerpoint and power on, LED on the adaptor will start to rapidly blinking adaptor must remain indoors and closer to the router to get the best Wi-Fi signal coverage as possible.
If the LED doesn’t start to blinking automatically, Press and hold the pairing button on the Wi-Fi adaptor until the LED on the adaptor start to fast blinking (1 blink per second)
Open and login into Mirabella Genio App, tap on the + on the top right cornice, APP will automatically detect the smart device in your local network, follow the below screens to add the smart device to your Genio App, please make sure you use the correct 2.4Ghz Wi-Fi name and password to connect, (please make sure don’t use Wi-Fi name that end with -5G)

if this method doesn’t work for you, please Turn OFF your Bluetooth on your phone, then re-try the EZ method or AP method listed below.

There are two methods to connect your light, EZ method (fast blinking) VS AP method (slowly blinking)

EZ Method (when the light is fast blinking, 1 blink per sec)

Connect the light chain to the Wi-Fi adaptor, full uncoil the light chain
Plug the Wi-Fi adaptor to the power point and power on, LED on the adaptor will start to rapidly blinking adaptor must remain indoors and closer to the router to get the best Wi-Fi signal coverage as possible.
If the LED doesn’t start to blinking automatically, Press and hold the pairing button on the Wi-Fi adaptor until the LED on the adaptor start to fast blinking.
Open and login to mirabella genio APP, follow the in-app prompts to connect smart light chain to your network.

if you cannot still connect via EZ mode (fast blinking 1 blink per second),please try AP mode, while the adaptor light is fast blinking, press and hold the pairing button again until it is slowly blinking (1 blink per 2 seconds), follow the instruction below or watch this AP mode pairing method https://youtu.be/6k0AUTTGKjw

AP Method (light is slowly blinking, 1 blink per every 2 seconds) recommend method for Telstra NBN user

open up the Mirabella genio APP, tap on + , add manually , select genio fairy light

Entre your Wi-Fi name and password, then in reset the device first screen tap on EZ mode in the Top right hand corner just below the battery icon , select AP Mode (refer to the 1st and 2nd image below) Now Confirm indicator slowly blinking (refer to image 3), hit Next, then Go to connect and connect to Wi-Fi named SmartLife_XXXX
AP Method
Note: If you fail to see Wi-Fi name beginning with the word SmartLife_XXXX, then the device is not slowly blinking, please reset it

After connected to SmartLife_XXXX, return back to Mirabella Genio, APP will start commence the countdown process and add the devices in the end of countdown.

AP Method | Please pay attention to the screen to determent the cause of time-out error
If the light never stops blinking, that means issue is on the phone setting, if you are using iPhone IOS 14, please ensure local network permission is turned on if light does stop blinking, but unable progress to “register on cloud” it indicates communication error with your router to our cloud service (need to check router setting)| please check and ensure

You enter the correct 2.4Ghz Wi-Fi name and password
Your light is receiving good Wi-Fi signal, please move it closer to the router and retry
please disable 5Ghz Wi-Fi signal then retry
If you have no luck with android phone, please try using Iphone or ipad to pair it

---|---|---

If you still having issue with pairing after use AP method, please check our FAQ pages on www.mirabellagenio.com.au/faqs

if you can pair the light to the APP but cannot control it via the APP or the light doesn’t power on at, please check the connection between the light and the adaptor.
Connection Instructions

Should the transformer, supply plug or supply flexible cord get damaged, do not attempt to repair.
TO BE REPAIRED BY AN AUTHORIZED PERSON ONLY

THIS IS AN AUSTRALIAN STANDARDS REQUIREMENT IN THE INTEREST OF YOUR SAFETY

Mirabella International Pty Ltd
Toll Free: 1800 636 528
www.mirabellagenio.com.au