TRISTAR VE-5893 Stand Fan Instruction Manual
- June 9, 2024
- Tristar
Table of Contents
VE-5893 Stand Fan
Instruction Manual
Instruction manual
VE5893 / VE5894
PARTS DESCRIPTION
SAFETY
• This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• By ignoring the safety instructions the manufacturer cannot be held
responsible for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord cannot
become entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the
supply.
• This appliance is only to be used for household purposes and only for the
purpose it is made for.
• To protect yourself against an electric shock, do not immerse the cord, plug
or appliance in the water or any other liquid.
• Never insert your fingers or any other object into the air outlet. Take
special care to warn children of these dangers.
• Do not use the unit:
near a source of fire.
in an area exposed to direct sunlight.
in an area where water is likely to splash.
near a bath, a shower or a swimming pool.
• WARNING: Do not wrap the cable around the main body of the appliance during
or after use.
• WARNING: Misuse of the appliance could cause personal injury.
• This appliance is intended to be used in household and similar applications
such as:
– Staff kitchen areas in shops, offices and other working environments.
– By clients in hotels, motels and other residential type environments.
– Bed and breakfast type environments.
– Farm houses.
**** This product complies with conformity requirements of the applicable
European regulations or directives.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local Authority or
local store for recycling advice.
PARTS DESCRIPTION
- Front guard
- Fan blade lock button
- Fan blades
- Locknut for the rear guard
- Rear guard
- Oscillation pen
- Clip
- Control buttons
- Knob for height adjustment
- Base
- Stand feet
BEFORE THE FIRST USE
- Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
- Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
- Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
ASSEMBLY
- Place the feet on the pedestal and push / click them into place.
- Insert the base tube into the pedestal and turn to lock it into place.
- Remove height adjustment ring by unscrewing and sliding up.
- Slide stand cover down onto the base and screw the height adjustment ring back in place.
- Loosen height adjustment ring to extend the extension rod and tighten back into place.
- Loosen rear fixing knob and attach extension rod.
- Unscrew the rear locking ring from the motor shaft in anti-clockwise direction.
- Set the rear cage and fit it well on the two position holes and make sure these holes are properly put through the holes on the rear cage.
- Hold the rear cage and screw the rear locking ring into the motor front cover in a clockwise direction.
- Install the fan blade onto motor shaft and fit the fan blade lock cap.
- Loosen the screw and nut on the bottom of the rear cage.
- Open front cage clips and position onto rear cage ensuring the screw bottom is aligned between both.
- Tighten screw and nut.
- Close the cage clips over both front and rear cage.
USE
- Use the speed control knobs to choose the desired ventilation level.
- To make the fan head oscillate, push down the Oscillation Knob.
- To stop the fan head from oscillating, pull-up the Oscillation Knob.
CLEANING AND MAINTENANCE
- Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the device.
- Never immerse the electrical device in water or any other liquid. The device is not dishwasher proof.
TABLE
| Information requirements for comfort fans | P |
|---|
Information to identify the model(s) to which the information relates to:
Description| Symbol| Value| Unit
Maximum fan flow rate| F| 62.| m3/min
Fan power input| P| 38.90| W
Service value| Sv| 2.| (m3/min)/W
Standby power consumption| Psb| –| W
Off power consumption| Poff| 0| W
Fan sound power level| Lwa| 54.| dB(A)
Maximum air velocity| C| 2,70| meters/sec
Season electricity consumption| Q| 12.| kWh/a
Measurement standard for service value| IEC 60879.1986 (corr.1992)
ENVIRONMENT
This appliance should not be put into the domestic garbage at the end of its
durability, but must be offered at a central point for the recycling of
electric and electronic domestic appliances. This symbol on the appliance,
instruction manual and packaging puts your attention to this important issue.
The materials used in this appliance can be recycled. By recycling of used
domestic appliances you contribute an important push to the protection of our
environment. Ask your local authorities for information regarding the point of
recollection.
Support
You can find all available information and spare parts at
www.tristar.eu!
WWW.TRISTAR.EU
Tristar Europe B.V. | Jules Verneweg 87
5015 BH Tilburg | The Netherlands
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>