mirabella genio I003255 USB Powered 2M LED Strip Light with Music Mode Instructions
- June 6, 2024
- Mirabella genio
Table of Contents
Mirabella genio I003255 USB Powered 2M LED Strip Light with Music
WARNING:
- LED STRIP LIGHT FOR INDOOR ONLY, please use a 5V 1A USB adaptor to power the light (not provided)
TO ENSURE THE SAFE AND SATISFACTORY OPERATION OF THIS SET PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE REFERENCE
SAFETY INFORMATION
- Remove set from the packaging before connecting to the USB adaptor
- Before using or re-using the set, inspect the set carefully
- Do not connect the set electrically to another set from a different manufacturer
- Ensure that the cable is completely uncoiled whilst the set is in use. Failure to do so may cause over-heating and subsequent malfunction
- Avoid damage to wire insulation (cable), as this could cause a short-circuit and
- Do not use any set which has been: cut, damaged, or has frayed wire insulation, loose connections, or exposed wires
If you need to cut the strip, please only cut along the cutline as outlined in the diagram below.
IR Remote
Please ensure you point the IR remote within 6m of the strip light’s receiver module,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>