BASS JAXX Kitten Kid Safe Wireless Headphone Instruction Manual
- June 6, 2024
- BASS JAXX
Table of Contents
Kitten Kid Safe Wireless Headphone
Instruction Manual
Introduction
Congratulations, and thank you for choosing the Kitten Wireless Headphones. This manual will help you operate the Kitten Wireless Headphones, but firstly you should familiarize yourself with the Bluetooth functionality of your mobile phone or other devices before using the Kitten Wireless Headphones.
Safety Rules
- Please follow the rules depicted h this manual closely to ensure your safety. Before using this Bluelcoth headehelleer we would stree#y encourage you to read through this use minuet.
- Be warier of any edges, uneven surfaces, motel parts. accessories and es packaging so as to prevent any possible injury or damage.
- Do not modify. repelr or dismantle these Bluetooth headphones. Doing so may result in free, Elec inc shocks. a complete breakdown of PM 6Icetooth headphones. etc. All are not covered under warranty.
- Do not use a diluent or valeta° liquid to clean the Bluetooth headphones.
- Do not to the Bluetooth headphones In a hazardous location.
Packaging Contents
Connection Diagram
How to use
4.1.General Functions
| Desired Result | Required Action |
|---|
Turn on &
Enter the pairing mode| Press and hold the On l Off Button for 3 seconds.
After turning on, the LED indicator flashes red/blue.
Pairing| Use a mobile phone with Bluetooth function or other Bluetooth devices
to perform necessary pairing action.
After pairing, the LED indicator slowly blinks with blue.
Turn off| Press and hold the On / Off Button for 3 seconds.
Charging| Plug the Micro USB plug into the Micro USB port. When charging, the
LED indicator turns red. After full charging, the LED indicator turns off.
Answering a Call| Press the On / Off button to answer a phone call, press the
On / Off button again to end cal
Press and hold 2 seconds to reject calls
Double dick to redial the last call.
Play / Pause Music| Press the On / Off button to play music and press it again
to pause music.
4.2. Pairing to Mobile phone or another device
To use your Bluetooth headphones, you must first pair your headphones with
a mobile phone or another Bluetooth device. Once your Bluetooth headphones is
paired to a specific mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
Pairing to a phone and Entertainment:
- Turn on your phone and ensure the Bluetooth function is activated.
- Turn on the headphones, enter the pairing mode.
- Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds, the phone will list the “BT CAT HP” as a discovered device. Select it and follow your phone’s instructions to select this pairing. • Your phone will confirm the pairing, and then press Yes/OK.
4.3. Charging your headphones
For your safety, please always use an appropriate 5V input charger/Adapter to
charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product.
Use the Micro USB Charging cable accessory provided with these headphones.
Connect the Micro USB plug to the Micro USB charging port on the headphones
positioned at in the headphones diagram on page 2. Connect the USB plug to a
USB port on a computer or wall adapter to activate charging.
“Make sure to keep the headphones charging for a minimum of 2 hours before
initial use.
Warning:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Bluetooth headphones if it has not been used for more than 6 months.
Product Specification
Driver Diameter: 40 mm
Impedance: 32 Ohms
Frequency Response: 20 Hz – 20 KHz
Sensitivity: < 85 dB
Power Supply: Li-ion
Battery 3.7V 160 mAh
Playing Time: 3 – 4 Hours
Charging Time: 2 – 3 Hours
Bluetooth Range: 32.8 Feet
Micro USB Charging Cable Included
FAQ
1. Why is there no power even when the headphones are turned on?
Ans: Ensure the battery has been charged for up to 1 hour for initial
use.
2. There is no sound when playback.
Ans: Check the connection between headphones with phone or computer, if
the connection is not established, please connect again. Make sure the
headphones is paired and connected with your target phone or another master
device.
FCC Statement
FCC STATEMENT
1. This device complies the Part 15 of the FCC Rules. The operator is subject
to the following two (1) This device may not cause rants interference. (2)
This device must accept any intedeterce received, including interference that
may cause undesired occasions. 2. Changes or modifications not expressly
approved by the party responsible for compliance could vad the usees austerity
be operating the equipment.
NOTE. This equipment has been tested and found to comply with a win the
Writs for a Class B digger dews, pursuant to Part 15 of the FCC Rules. Those
Inds are designed to provide reasonable protection against rants interim: mu
in a residential newton. This equipment generates uses and can radiate redo
frequency energy and, if not instated and used in =ordinal with the
instructions, may cause hamitil interference to ratio communizations. However.
there is no guarantee that interference wi not ccar it a pertiaLsr nstabtrn.
If is equipment does cause harmful interference to radio or television
reception, Medi can be determined by trig be equipment off at on. the user is
encouraged to by to coned to interference by one cr maroon* following metros –
%cried or relocate the receiving arena – Increase the separation between de
equipment and receiver. – Connect the equipment Olean outlet on an awl &foram
from that to which be receiver is corrected. – Consult re dealer an
experienced retfiorIV technician for help.
RF wairing statement
The device has been evaluated to meet general RF exposure retirement The
device can be used in a partible exposure location viecut restrain.
*** Safety instructions for the lthium batten/ and charging the product
-The input voltage to the product is 5V 1A.
-In ceder to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charged adapter for chargng the product
-Only charge the product at ambient temperatures between 10 deg Cf 50 deg `F and 40 deg °C/104 deg ‘F.
– Do not heat above 70 deg °C1158 deg °F. e.g. Do not expose to sunlight or
throw into fire.
-Switch off the product after use.
-Please note that we won/ take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product
-In extreme cases, abuse or misuse of Lithlurn battery peck can lead to an explosion, heat generation. fire development or smoke development
FCC ID: 2ADM5-HP-0553
Distributed by 1616 -folders, Inc.
701 Market Street, Suite 20
Philadelphia, PA 19106
Made in China
Keep all relevant information for future reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>