NEXXT SOLUTIONS HS100 WiFi Smart Light Switch User Manual

NEXXT SOLUTIONS HS100 WiFi Smart Light Switch User Manual

Android & IOS system

Alexa Tutorial

Google home Tutorial

Product Overview

Product Features

• Works with Amazon Alexa and Google Home, commanded by you voice.
• Control you home with your smart phone app or tablets from anywhere at anytime.
• Timing switch to turn ON/OFF your lights and appliances automatically.
• Intelligent sharing can be freely Shared with family members
• Refined appearance and made of fire resistant material, Safe and Durable.
• Overload protection, easy to replaces your traditional mechanical switch (Requires a neutral wire).
• The Smart Switch blend well with any room decor with its elegant, minimal design with sensitive captive touch control.
• Its LEDs can guide you at night when lights go off and you an simply turn it ON/OFF by directly pressing.

Specifications

INSTALL THE WALL SWITCH

Note: verify all the connections are correct and wire nuts are screwed tightly.

Wall Switch(Load/live)
(Required connect the Load/Live wires correctly. they are not interchangeable. if you are not sure which of the two wires is live and which is load, simply try one configuration)

• Cut off the power before installation
• Please use it only when it’s installed with RCD or current leakage protector at home

Android System Connection Ways

1. Click the ‘+’button ” for 5 seconds
2. Touch the switch’s ON/Off button for 5 second Until blue light three flashes on stop please choose first way and next.
3. Input current WI-Fl name and password for you home router.
4. Modify the device name.

IOS System connection first ways

1. ClIck the “4-“button

2. Touch the switch’s ON/OFF button for 5 seconds
   Until blue light three flashes one stop please choose first way and next.

3. Input current WI-Fl name and password for you home router.

4. Modify the device name.

Attention :

1. One device only can connect with one mobile phone. if friend want control device, please choose share function. if want connect with new network or mobile phone, please delete the device in app , and connect again
2. If you want after service and return of goods, please delete the device in app otherwise affect the after service.

IOS System connection second ways

1. Touch the switch’s ON/OFF button for 5 seconds, until blue light three flashes one stop then Touch ON/OFF button again for 10 seconds Until the blue light continuous quickly choose second way and next
2. Please don’t click next on this step, please according picture guide, go back your phone setting choose Wi-Fi name ITEADXXXXX and enter password 123456789 after connected with ITEAD come back App this page click next

Attention:

• Products can only be paired on 2.40-Wifi-Router. don’t accept the 5G-Wifi-Router
• Please set your home Wi-Fi account name and passwords use numeric and letters. don’t use special symbols.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not uninstalled in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur inarticulate installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: Changes or modifications made to this device not expressly approved by NEXXT SOLUTIONS may void the FCC authorization to operate this device.
  Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>