Pet Control HQ Remote Control Dog Training Device User Manual

Pet Control HQ Remote Control Dog Training Device

PRECAUTIONS

Attention:

• This product is suitable for large, medium, and small dogs.
•  This product can not be directly tried on humans, otherwise, it will violate local laws.
•  Before playing with dogs, please turn off or remove this device.
•  Do not have your dog wear this device for a long time.
•  It is forbidden to be played as a toy by children.
•  It is forbidden to place the bark-stopping device near the stove or at high temperatures.
•  It is strictly prohibited to open the product shell because this will cause breakage of the lithium battery and cause a fire.
•  The Company will not be responsible for any direct or indirect losses caused by any misuse.

MAIN FEATURES

1. Remote Range 800m.
2. The receiver comes with a flashing LED light for easy training and searching for your dog.
3. The flashlight is designed for night lighting.
4. Various dog training modes are adjustable, and users can choose the training level suitable for dogs according to their different size dogs.
5. Up to 3 dogs can be trained on the same transmitter (need to purchase a receiver separately)

RELEVANT DESCRIPTION

Receiver description

Transmitter description

PACKAGE CONTENTS

• Handheld
• Transmitter Nylon
• Collar Strap
• User Manual
• Receiver
• USB Charging
• Cable Test light

HOW TO USE IT

1. (note: please charge the product before using it!) 0Charging operation instruction:

Transmitter low voltage hint:when its voltage is low, the indicator light flashes five times every 2 seconds, meanwhile, the battery on the screen displays 1 cell at the same time

Charging requirements:

• The data cable is Micro USB
•  Output voltage: DC5V
•  Charge the battery completely before the first use (this may take up to 2 hours).
•  Do not charge the battery near flammable substances.

Receiver charging state:

The brightness of red light slowly lightens when charging, and when fully charged, the green light will flash.

Charging state of transmitter:

When charging, the red indicator will flash; Meanwhile, the battery on the screen is running. After full charge, the green indicator light will stay steady.

OPERATING INSTRUCTIONS FOR VARIOUS FUNCTIONS OF THE PRODUCT

OPower on-off:

• Power on receiver:• Turn on by pressing the power button for 3 seconds
• The two Blue indicators will be on for 3 seconds
• when On meanwhile vibrates 1 second.
•  The green light flashes once every 10 seconds
• when the receiver is ON
• Power off receiver:•Turn Off by pressing the power button for 3 seconds
• The two Red indicators will flash 3 times when Off
• meanwhile vibrates 1 second

The receiver is paired with the transmitter:

1.  Press any button to activate the transmitter
2.  Choose a channel CH1 , CH2, or CH3 by pressing the CH button
3.  Adjust the level by pressing the + or – button, make sure the level is above 00
4. Turn on the Receiver, then press the power button 3 times in a row, the LED indicator on the receiver will flash red. and is now in connection mode for approx. 20 seconds.
5.  Press any of the function buttons(Tone, Vibration, Static stimulation) on the transmitter to complete the connection. If the connection is successful, the LED indicator on the receiver lights up blue 3S and a double beep sounds
6.  If you have 2 or 3 Receivers, just choose the different channels, and pair as the above steps. Channel switching operation mode: press the

CH button to switch channels

OStatic Stimulation function level adjustment operation

C, Vibration function level adjustment operation

Tone function level adjustment operation:

Rank3
Delivers audible tone to the receiver. Tone will produce a time-out after pressing continuously for 15 seconds and will not deliver the command until the button is released.The receiver flashes a green light while working ,time length is synchronized

Dog searchlight function level adjustment operation:

IMPORTANT NOTICE

1.  Press any button to activate the transmitter. the backlight is On
2.  The backlight will stay for 20 seconds for power-saving, then will be off if without any operation for 20 seconds,but the working mode is still shown on the screen.
3.  The transmitter will go into sleep mode after 1 minute and does not display any working mode or icons.

SUMMARY OF FREQUENTLY ASKED QUESTIONS

•  Is the vibration feature safe for my pet?
•  Although vibration is unpleasant, it is harmless to your pet.
• Electronic training equipment requires users to interact and train their pets to achieve the desired results.
•  How old is my pet to use a dog training collar?
•  Your pet should be able to recognize some basic obedience commands, such as “sit” or “stay.” Pets must be at least 6 months old before using a dog training collar.
•  Once my pet has been trained and has obeyed my orders, does he still will continue to wear the transmitter?
•  Probably not, but you might strengthen training it using a receiver. Q: Is the receiver waterproof?
•  Yes. The rubber cover must be placed in the correct position and the dog must not be allowed to swim with it.
•  How long can I keep vibrating my pet?
•  You press the vibration button, the maximum vibration time is
•  O seconds, after that, it can’t vibrate again, unless you press the button again.
•  How long do I give pet training classes?
•  The training sessions should be positive and short, about 10-15 minutes at a time.
•  Does the product have after-sale service?
•  Our product has an after-sale service. As long as it is a quality problem which does not belong to damage by human action or is not caused by the wrong operation, we can offer you 1 year guarantee.

WARM TIPS

Please read and follow the instructions in this manual. It is important to wear the collar correctly. When a pet wears a collar for too long or too tight can cause skin damage.Too long or too tight wearing may cause stress, which can lead to skin damage. This is often mistaken for a burn.

1.  Do not tie the device too tightly around the dog’s neck.
2.  Do not tie your belt to the collar.
3.  Do not leave the device on the dog for more than 12 hours.
4.  Replace the collar on your pet’s neck every 1 or 2 hours.

FCC COMPLIANCE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>