MAYTAG Front Load Washer Owner’s Manual
- June 7, 2024
- Maytag
Table of Contents
MAYTAG Front Load Washer
DETAILED PLANNING DIMENSION
MAYTAG® FRONT LOAD WASHER WITH EXTRA POWER AND 24 HOUR FRESH
HOLD® OPTION – 5 cu ft
ELECTRICAL REQUIREMENTS
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and INSTALLATION INSTRUCTIONS, located in your appliance’s Owner’s Manual, before installing and operating this appliance.
Electrical Requirements
MHW8630HC MHW8630HW| 5.0 cu ft DOE (US)/5.8 cu ft IEC (CAN)
Minimum Circuit Amperage Rating| 15 A
Maximum Ampere Draw| 10.36 A
Operating Voltage| 120 V AC only
Operating Frequency| 60 Hz
PRODUCT DIMENSIONS
| MHW8630HC MHW8630HW | 5.0 cu ft DOE (US)/5.8 cu ft IEC (CAN) |
|---|---|
| Unit of Measurement | in (minimum) |
| (maximum)** | mm (maximum) |
| Height (with feet) (A) | 385∕8 |
| Product Width (B) | 27 |
IMPORTANT: Dimensional specifications are provided for planning purposes only.
| MHW8630HC MHW8630HW | 5.0 cu ft DOE (US)/5.8 cu ft IEC (CAN) |
|---|---|
| Unit of Measurement | in (minimum) |
| (maximum)** | mm (maximum) |
| Door Width (C) | 221∕4 |
| Product Depth (D) | 3215∕16 |
| Product Depth with Door Open (E) | 5215∕16 |
| Door Height (F) | 221∕8 |
| Height to Bottom of Door (G) | 10 |
| MHW8630HC MHW8630HW | 5.0 cu ft DOE (US)/5.8 cu ft IEC (CAN) |
|---|---|
| Unit of Measurement | in (minimum) |
| (maximum)** | mm (maximum) |
| Position of Power Cord (H) | 355∕16 |
| Power Cord Length | 72 |
| Position of Water Inlet Valves (I) | 355∕16 |
| Position of Drain Hose (J) | 8 |
| Drain Hose Length | 52 |
| Diameter of Drain Hose | 1 |
All Dimensions show recommended spacing allowed, except for closet door ventilation openings which are minimum required.
This washer has been tested for installation with spacing of 0″ (0 mm) clearance on the sides. Consider allowing more space for ease of installation and servicing, and spacing for companion appliances and clearances for walls, doors, and floor moldings. Add spacing of 1″ (25 mm) on all sides of washer to reduce noise transfer. If a closet door or louvered door is installed, top and bottom air openings in door are required.
*For additional details (or information) specific to your model, refer to your Quick Start Guide.
CUSTOM UNDER COUNTER INSTALLATION
RECESSED AREA OR CLOSET INSTALLATION
NOTE: All 27″ wide washers should have 19″ clearance, while all 29″ wide washers should have 22″ clearance
FAQS
Is Maytag good brand for washer?
If you’re looking for a seriously dependable washer and dryer, Maytag delivers. As a big player in the laundry scene since 1893, they have engineered their appliances to maintain top-notch performance for years to come.
How long does a Maytag front loader last?
The average useful life for appliances range from 10.6 – 11.5 years 1
What washing machine do repairmen recommend?
The Puls technicians surveyed rated Whirlpool the highest, followed by LG and Samsung.
What brand of front load washer is most reliable?
Samsung front-load washers rank highest in customer satisfaction, according to J.D. Power’s laundry appliance satisfaction study, and Samsung was named one of the most reliable brands by Yale Appliances and Puls repair technicians, as well. With this washer, you get 10 cycles.
Which brand is better GE or Maytag?
Ultimately the Maytag is probably the better built of the two units , although it’s a pretty close call. The features are similar, but GE provides an extra layer of versatility, although it’s extra bulk also makes it a harder fit in certain places. If you’re stacking or looking for features, go GE.
Is it worth repairing a 5 year old washing machine?
As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.
Which front load washer lasts the longest?
Currently, LG is leading the market in manufacturing reliable, long-lasting front load washers. In fact, LG takes the top 6 spots in Consumer Reports for reliability ratings followed by Speed Queen.
Which is no 1 washing machine in world?
Whirlpool tends to be the best washing machine brands in world. This machine has a unique feature known as ZPF Technology. This technology gets the tub filled 50% faster even if the water pressure is really low.
Why did Maytag go out of business?
“Unfortunately, the business was broken such that the company could not invest in the modernization of this particular facility ,” said Jeff Noel, vice president of Whirlpool.
Where is the pump filter on a Maytag front load washer?
Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter. Remove the drawer by releasing the tab on each side.
Does my Maytag front load washer have a filter?
However, the Maytag washer filter location for front-loading machines is behind a dispenser drawer on the right side of the washer’s front base. This location allows it to better protect the drain pump that’s alongside it.
What size washer will wash a king size comforter?
More specifically to successfully wash a king-sized comforter, you need a washer that has a drum capacity of 5.0 cubic feet or larger. The washer should be a front-loading washer or a top-loading washer without or with a removable center agitator.
Is Maytag owned by Whirlpool?
Whirlpool Corp. (WHR) is a leading home appliance company that sells products under a wide variety of brands such as Whirlpool, KitchenAid, Maytag, Amana, Jenn-Air, and Consul.
Is Maytag made in China?
While Whirlpool has owned the Maytag name since 2006, Maytag is the oldest brand among laundry appliances made in the USA. Since its inception in 1893, Maytag has produced high-quality, USA made washer and dryer models.