NEXXT SOLUTIONS Snap S6 Security Camera User Guide
- June 5, 2024
- Nexxt Solutions
Table of Contents
NEXXT SOLUTIONS Snap S6 Security Camera
What’s in the box
Please consult this checklist for all parts.
Description
- Power Port:
- DC 5V+10%
- Power on/off:
- Press the button for 3 seconds to turn on/off the camera
- Status light:
- Red light solids on: the camera network is abnormal
- Red light blinks: awaiting WiFi connection, or currently connecting (faster blinking)
- Blue light solids on: camera running correctly
- SD card
- slot Support local SD Card storage (Max.128G)
- Reset
- Press and hold on for 5 seconds to reset the camera
- Charging
- Red indicator solids on: battery is charging
- indicator
- Blue indicator solids on: charging completed
- Battery capacity
- 9400mAh (Two 21700 lithium-ion batteries)
Install
Mode 1 Bracket (A) Installation 
- Fix the bracket on the wall with screws
- Bring the camera closer to the bracket
Mode 2 Bracket (B) Installation 
- Fix the bracket on the wall
- Install the camera in the bracket and lock it with the screw
Connect
Download
Smart Life is available for both ioS and Android OS. Rearch the name ‘Smart
Life’in App Store or Android Market, or scan the QR-Code to download the App.
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz).Before
connecting to the WiFi network,please set the parameters of the router, and
record the SSID and password of your WiFi. 
Registration process
Step 1 Open the Smart Life App, click “Register”, read the “Privacy
Policy” and click “Agree” 
Step 2 Input a legal and valid Mobile number or Email address and click
Continue”. Input Verification Code, then log in the app. 
QR Code Configuration
- Open the Smart Life App, click “Create family”, and you can customize the Family name and related settings
- Continue to click “Security & Sensor” >> “Smart Camera”,and then choose”Add Device” or “+”,ready to add camera.
- In “Add Device” this interface,continue to click “next step”,and then you should input your WiFi’s passwords.
Note: - Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
- In this interface,you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
- When connecting,you should make sure your router,mobile, and camera are as close as possible.When camera added successffully,click “ E ” you could also DIY the camera’s name.
Connecting
Make sure your router, mobile, and device are as close as possible
Settings
In “Smart Camera” interface,click “you can set the camera common
functions.
FAQ
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q:Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the APP.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the
SD card is normally available and the format is FAT32. And the TF card can’t
be identified when the internet environment is not good.
Q WhyI can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened;Message notification and authority
confirmation in the mobile phone system have been opened.
Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App.
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a
notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for
every moment.
Day 8 Night
Powerful night vision means no interruptions, even in complete darkness.
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is Connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning : Changes or modifications made to this device not expressly approved by Xian Chishine Optoelectronics Technology Co.,Ltd may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.