NEXXT SOLUTIONS HACOP20S Solar PTZ Camera User Manual

June 1, 2024
Nexxt Solutions

NEXXT SOLUTIONS HACOP20S Solar PTZ Camera

Specifications

  • 5W solar panel
  • WIFI antenna
  • On-off key
  • 7 Tapping Screws
  • 4 Hand tighten the screws
  • 1 Ball machine bracket
  • 1 Power cable
  • 1 Bracket

Product Usage Instructions

Setting Up the Solar PTZ Camera

  1. Mount the camera using the provided bracket and screws.
  2. Connect the power cable to the camera.
  3. Ensure the camera is in a location with ample sunlight for the solar panel to charge.
  4. Turn on the camera using the on-off key.

Connecting to Tuya Smart App

  1. Download and open the TuyaSmart App on your smartphone.
  2. Register and log in to your account.
  3. Click on the “+” icon on the top right corner of the page and select “Add Device.”
  4. Choose “Smart Camera (Wi-Fi)” and follow the on-screen instructions to connect your camera to the app.
  5. Select your Wi-Fi network and enter the password (2.4GHz only).
  6. Scan the QR code on your phone with the camera.
  7. Wait for the prompt tone and click “I Heard a Prompt” to complete the setup.

PRODUCTS & PACKING LIST

Product picture

Packing list

Product Diagram

Process

  1. Solar panel: connect the panel to the camera, fix a suitable angle with screws
  2. SD card installation: open the silicon flap and insert the SD card, then make sure to close the silicon flap to avoid rain leakage.
  3. insert the TF card, then tighten the screws. Power cable: connect the cables between the panel and camera, then tighten the waterproof cap.
  4. Panel power-on: Remove the rubber of the panel, and make sure it is powered on. Then put the rubber back on the panel.

INSTALLATION

  1. Integrated installation
  2. Separated installation

APP INSTALLATION

  • Search and download ” Tuya Smart” in major application markets or scan the QR code below to download the APP.

  • Once you download the APP to your smartphone, you may enter the first page which you can log in with your existing account or register.

  • ( If you are a new user of Smart Life and don’t have an account, please choose register first and follow the below screenshots to complete the registration. )

  • If you have an existing account, there are two ways to log in, one is with an SMS verification Code, and the other one is with a password. In case you forget the password, you may choose to log in with an SMS verification Code or you can choose forgot password to reset it by Entering the Verification Code which is sent to your mobile via message. )

  • Once the account has been set up successfully, then you will automatically enter the page “add device”, kindly follow the below steps to add the camera.

Step1

  • Open the TuyaSmart APP, click”+” on the top right corner of the page “HOME”, then select “Add Device”. Select camera & Lock
  • Then select smart camera (Wi-Fi)
  • Follow the steps in the APP to reset the camera.
  • Select “QR code for camera” to add your device by QR code.
  • Check the prompt then click “Next”

Step2

  • Select your “Wi-Fi Network Name” and then Password, and then click OK.
  • The product only supports 2.4GHz WiFi.
  • Scan the QR Code on your phone with a camera. Heard a prompt tone, then click “I Heard a Prompt”.
  • Connecting Device, make sure the camera device is near the router, added successfully click on Done. You will get to the home page.

Step3. If you choose ” the other mode” on the top of the right side, you may find QR Code Net-pairing Which you will go back to the “Add device” page and process it again like the above procedure. Or you can choose “Smart configuration” and follow the below screenshots and after that, you will see the device added successfully.

Frequently Asked Questions

  1. Can I share with family and friends?
    Yes, you can share your cameras with family and friends who will have access to view the camera and control your bulbs, plugs, and other devices. In the app, click the Family name at the top and click on the“Home Management” button, and you will be able to give or revoke sharing permissions.
    In order to share, the other user should already have downloaded the app and registered a new account.

  2. What’s the Wireless Range?
    The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

  3. How many cameras can I control?
    Tuya Smart app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit on how many devices can be connected to one router.

  4. My device can’t be connected to a network with the App

    • Make sure the device is under the config status (indicator light is flashing quickly).
    • Make sure the Wi-Fi is available and the device is not far away from the router.
    • Make sure the Wi-Fi password you input is correct.
  5. My device shows offline in my App

    • Make sure the device is powered on.
    • Make sure the network is stable and the Wi-Fi name and password are not modified.
    • If not, add the device again. If the network is normal, but it’s still offline.
    • Check if there are too many Wi-Fi connections. You can restart your router to check the status of the device.
  6. My phone cannot be added as a device
    First, confirm that the device is turned on normally and the WI-FI signal is 2.4GHZ. If you still cannot connect, please press and hold the reset button at the bottom of the device for 12 seconds. After hearing the voice prompt, wait for 10 seconds and the device will restart. See The device prompt light flashes red and green, just connect to the phone again!

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the theeauioment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals