Macson M161A-016 Lithium Jump Starter User Manual
- August 27, 2024
- Macson
Table of Contents
Macson M161A-016 Lithium Jump Starter
Product Information
Specifications
- Warranty: 12 months against defective material or workmanship under normal use
- Void Warranty Conditions: Misuse, careless handling, unauthorized repairs/modifications
Product Usage Instructions
- Proper Handling: Handle the product with care to avoid damage.
- Normal Use: Use the product for its intended purpose as described in the user manual.
- Maintenance: Regularly clean and maintain the product according to the provided instructions.
- Storage: Store the product in a dry and safe place when not in use.
Warranty Details
- The warranty covers defects in material or workmanship for 12 months from the date of purchase.
- Any misuse, careless handling, unauthorized repairs, or modifications will void the warranty.
Contact Information
- If you encounter any issues with the product or need assistance, please contact our customer support team.
FAQ
- Q: What should I do if my product is damaged?
- A: If your product is damaged, please contact our customer support for guidance on repair or replacement options.
- Q: Can I repair the product myself without voiding the warranty?
- A: Unauthorized repairs may void the warranty. Contact our customer support for authorized repair services.
Thank you for purchasing the lithium jump starter product. The product was designed with these functions for emergency uses:
Jump Starter
- Instantly jumpstart a vehicle.
PowerBank
- Charge mobile phones, tablets, and other digital devices.
Flashlight
- Super bright Flashlight with multiple modes.
WARNING
Please fully read and understand the user manual before operating the product,
as it contains the information you will need to operate the product properly.
Failure to follow these instructions may result in personal injury or property
damage. Keep this manual for future reference.
DIAGRAM
- LED screen display
- LED light button
- Power ON/OFF button
- Jumpstart port
- USB-C charging input
- USB-A output #1
- USB-A output #2
- LED strip light
- Flashlight
SPECIFICATIONS
- Model: M161A-016
- Dimension: 7.5(L)3.9(W)1.8(H) inch
- Capacity: 59.2Wh(14.8V, 4Ah)
- Start current: 2000Amps
- Peak current: 3000Amps
- Compatible Vehicle: 12V lead-acid battery system vehicle
- USB-A output #1: 5Vdc, 3A / 9Vdc, 2A / 12Vdc, 1.5A
- USB-A output #2: 5Vdc, 2.4A
- USB-C Input & Output: PD60W Max
- Wireless Output: 10W Max
- LED light: Flashlight and LED strip light
- Charging temperature: 32°F-113°F (0°C- 45°C)
- Operating temperature: -4°F-122°F (-20°C- 50°C)
- Time to fully charge: Approximately 2.5 hours
wARNING
- Keep out of reach of children.
- The product was designed for jumpstarting only 12V lead-acid battery system vehicles.
- Use of an accessory not recommended or sold by the manufacturer may result in damage to the product or personal injury.
- Do not jumpstart the vehicle engine more than 3 times consecutively as it may overheat or damage the product, please allow at least 60 seconds of interval after each jumpstart.
- Do not touch the RED(positive) and BLACK(negative) jumper clamps at any point, it is dangerous and may cause product damage or personal injury.
- Do not use the product in hot temperatures higher than 60’C.
- Keep the product away from flammable liquids or gases dust, or corrosive liquids.
- Do not disassemble the product. Incorrect assembly may result in fire or electrical shock.
- Please recharge the product every 6 months when not in use for a long time.
How to recharge the product?
- Recharge the product by using the USB-C charging cable, and connect it with the USB power supply.
- Disconnect the cable and power supply after the product was fully charged.
How to check the battery level?
Press the ( ) button to turn it on, and the power level will be displayed on
the LED screen.
How to jumpstart a vehicle?
-
Press ( ) button to turn on.
NOTE: Please keep the battery level higher than 50% for better jumpstart performance. -
Plug the jumper cable into the product’s jumpstart port completely.
The jumper cable’s GREEN LED indicator will start flashing , this means that the product is in jumpstart “Stand-by mode”. -
Attached the jumper cable clamps to the vehicle battery.
- RED(positive) clamp attach to the vehicle’s POSITIVE terminal(+)
- BLACK(negative) clamp attach to the vehicle’s NEGATIVE terminal(-)
- The jumper cable’s GREEN LED indicator will be shown solid green , this means that the product is in “Jumpstart READY mode”.
- Note: In “Jumpstart READY mode”, you will have 120 seconds to jumpstart the engine.
-
Start the engine.
-
Remove the jumper cable clamps from the vehicle battery.
How to use the LED light?
- Press button to switch among the below modes: 1. Flashlight➔2. SOS➔ 3. Strobe➔4.Flashlight +WHITE LED all on➔ 5. WHITE LED➔ 6. RED LED flashing➔ OFF
- Press and hold , button for 2 seconds to turn OFF the light directly.
What’s in the box?
WARRANTY
- The manufacturer warrants this product for 12 months against defective material or workmanship under normal use.
- This limited warranty is void if the product is misused, subjected to careless handling, repaired, or modified by anyone other than the manufacturer.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>