VISUAL COMFORT S 1400 Dauphine Floor Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT S 1400 Dauphine Floor Lamp
Product Information
The Dauphine Floor Lamp (Item # S 1400) is a stylish and functional lighting fixture that adds elegance to any room. It is designed to be assembled and installed by a person familiar with construction and electrical hazards. The lamp requires a bulb (not included) to provide illumination.
Important Notice
This light fixture should be installed in accordance with all applicable local installation codes. Inspect the item and its contents carefully before installation. If any damage or defect is found, do not proceed with the installation. Retain all packaging material until installation is complete and approved.
Product Assembly Instructions
- Carefully remove all parts from the box.
- Install the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the finial (A).
- Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet and test the fixture.
- Installation is complete.
Product Care Instructions
To keep the Dauphine Floor Lamp in optimal condition, follow these care instructions:
- Clean only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents, as they may damage the lamp’s surface.
Note: The Dauphine Floor Lamp is UL listed for use in the United States.
Dauphine Floor Lamp
- Item # S 1400
NOTICE
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect items and contents carefully. If any damage or defect is found, do not install it. Retain all packaging material until installation is complete and approved.
ASSEMBLY INSTRUCTIONS
- Carefully remove all parts from the box.
- Install harp (C) onto the saddle (D).
- Place shade (B) to the harp (C) and secure with a finial (A).
- Insert bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug into a proper electrical outlet and test the fixture.
- Installation is complete.
Care Instructions
- Clean only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>